We no longer build on RHEL-6, so can bump min required RHEL to 7
removing many conditions.
Signed-off-by: Daniel P. Berrangé <berrange(a)redhat.com>
---
libvirt.spec.in | 92 ++++++-------------------------------------------
1 file changed, 11 insertions(+), 81 deletions(-)
diff --git a/libvirt.spec.in b/libvirt.spec.in
index f83e5f8601..150a168514 100644
--- a/libvirt.spec.in
+++ b/libvirt.spec.in
@@ -3,7 +3,7 @@
# This spec file assumes you are building on a Fedora or RHEL version
# that's still supported by the vendor. It may work on other distros
# or versions, but no effort will be made to ensure that going forward.
-%define min_rhel 6
+%define min_rhel 7
%define min_fedora 26
%if (0%{?fedora} && 0%{?fedora} >= %{min_fedora}) || (0%{?rhel} &&
0%{?rhel} >= %{min_rhel})
@@ -34,10 +34,7 @@
%if 0%{?rhel}
%define with_qemu_tcg 0
- %define qemu_kvm_arches x86_64
- %if 0%{?rhel} >= 7
- %define qemu_kvm_arches x86_64 %{power64} aarch64 s390x
- %endif
+ %define qemu_kvm_arches x86_64 %{power64} aarch64 s390x
%endif
%ifarch %{qemu_kvm_arches}
@@ -58,11 +55,7 @@
%define with_hyperv 0%{!?_without_hyperv:1}
# Then the secondary host drivers, which run inside libvirtd
-%if 0%{?fedora} || 0%{?rhel} >= 7
- %define with_storage_rbd 0%{!?_without_storage_rbd:1}
-%else
- %define with_storage_rbd 0
-%endif
+%define with_storage_rbd 0%{!?_without_storage_rbd:1}
%if 0%{?fedora}
%define with_storage_sheepdog 0%{!?_without_storage_sheepdog:1}
%else
@@ -116,7 +109,7 @@
# librados and librbd are built only on x86_64 on rhel
%ifnarch x86_64
- %if 0%{?rhel} >= 7
+ %if 0%{?rhel}
%define with_storage_rbd 0
%endif
%endif
@@ -146,20 +139,12 @@
%endif
%endif
-# Fedora 17 / RHEL-7 are first where we use systemd. Although earlier
-# Fedora has systemd, libvirt still used sysvinit there.
-%if 0%{?fedora} || 0%{?rhel} >= 7
- %define with_systemd 1
- %define with_pm_utils 0
-%endif
-
-# Fedora 18 / RHEL-7 are first where firewalld support is enabled
-%if 0%{?fedora} || 0%{?rhel} >= 7
- %define with_firewalld 1
-%endif
+%define with_systemd 1
+%define with_pm_utils 0
+%define with_firewalld 1
# fuse is used to provide virtualized /proc for LXC
-%if %{with_lxc} && 0%{?rhel} != 6
+%if %{with_lxc}
%define with_fuse 0%{!?_without_fuse:1}
%endif
@@ -194,10 +179,7 @@
%define with_libssh 0%{!?_without_libssh:1}
%endif
-# Enable bash-completion for new enough distros
-%if 0%{?fedora} || 0%{?rhel} >= 7
- %define with_bash_completion 0%{!?_without_bash_completion:1}
-%endif
+%define with_bash_completion 0%{!?_without_bash_completion:1}
# Use Python 3 when possible, Python 2 otherwise
%if 0%{?fedora} || 0%{?rhel} > 7
@@ -220,11 +202,7 @@
%define qemu_group qemu
-%if 0%{?fedora} || 0%{?rhel} >= 7
- %define with_systemd_macros 1
-%else
- %define with_systemd_macros 0
-%endif
+%define with_systemd_macros 1
# RHEL releases provide stable tool chains and so it is safe to turn
@@ -315,47 +293,29 @@ BuildRequires: bash-completion >= 2.0
BuildRequires: ncurses-devel
BuildRequires: gettext
BuildRequires: libtasn1-devel
-%if (0%{?rhel} && 0%{?rhel} < 7)
-BuildRequires: libgcrypt-devel
-%endif
BuildRequires: gnutls-devel
BuildRequires: libattr-devel
# For pool-build probing for existing pools
BuildRequires: libblkid-devel >= 2.17
# for augparse, optionally used in testing
BuildRequires: augeas
-%if 0%{?fedora} || 0%{?rhel} >= 7
BuildRequires: systemd-devel >= 185
-%else
-BuildRequires: libudev-devel >= 145
-%endif
BuildRequires: libpciaccess-devel >= 0.10.9
BuildRequires: jansson-devel
%if %{with_sanlock}
BuildRequires: sanlock-devel >= 2.4
%endif
BuildRequires: libpcap-devel
-%if 0%{?rhel} && 0%{?rhel} < 7
-BuildRequires: libnl-devel
-%else
BuildRequires: libnl3-devel
-%endif
BuildRequires: avahi-devel
BuildRequires: libselinux-devel
BuildRequires: dnsmasq >= 2.41
BuildRequires: iptables
-%if 0%{?rhel} && 0%{?rhel} < 7
-BuildRequires: iptables-ipv6
-%endif
BuildRequires: radvd
BuildRequires: ebtables
BuildRequires: module-init-tools
BuildRequires: cyrus-sasl-devel
-%if 0%{?fedora} || 0%{?rhel} >= 7
BuildRequires: polkit >= 0.112
-%else
-BuildRequires: polkit >= 0.93
-%endif
# For mount/umount in FS driver
BuildRequires: util-linux
%if %{with_qemu}
@@ -373,12 +333,8 @@ BuildRequires: parted-devel
# For Multipath support
BuildRequires: device-mapper-devel
%if %{with_storage_rbd}
- %if 0%{?fedora} || 0%{?rhel} >= 7
BuildRequires: librados2-devel
BuildRequires: librbd1-devel
- %else
-BuildRequires: ceph-devel
- %endif
%endif
%if %{with_storage_gluster}
BuildRequires: glusterfs-api-devel >= 3.4.1
@@ -405,11 +361,7 @@ BuildRequires: fuse-devel >= 2.8.6
BuildRequires: libssh2-devel >= 1.3.0
%endif
-%if 0%{?fedora} || 0%{?rhel} >= 7
BuildRequires: netcf-devel >= 0.2.2
-%else
-BuildRequires: netcf-devel >= 0.1.8
-%endif
%if %{with_esx}
BuildRequires: libcurl-devel
%endif
@@ -485,11 +437,7 @@ Requires: iproute-tc
%endif
Requires: avahi-libs
-%if 0%{?fedora} || 0%{?rhel} >= 7
Requires: polkit >= 0.112
-%else
-Requires: polkit >= 0.93
-%endif
%ifarch %{ix86} x86_64 ia64
# For virConnectGetSysinfo
Requires: dmidecode
@@ -539,9 +487,6 @@ Requires: libvirt-libs = %{version}-%{release}
Requires: dnsmasq >= 2.41
Requires: radvd
Requires: iptables
-%if 0%{?rhel} && 0%{?rhel} < 7
-Requires: iptables-ipv6
-%endif
%description daemon-driver-network
The network driver plugin for the libvirtd daemon, providing
@@ -554,9 +499,6 @@ Summary: Nwfilter driver plugin for the libvirtd daemon
Requires: libvirt-daemon = %{version}-%{release}
Requires: libvirt-libs = %{version}-%{release}
Requires: iptables
-%if 0%{?rhel} && 0%{?rhel} < 7
-Requires: iptables-ipv6
-%endif
Requires: ebtables
%description daemon-driver-nwfilter
@@ -570,11 +512,7 @@ Summary: Nodedev driver plugin for the libvirtd daemon
Requires: libvirt-daemon = %{version}-%{release}
Requires: libvirt-libs = %{version}-%{release}
# needed for device enumeration
-%if 0%{?fedora} || 0%{?rhel} >= 7
Requires: systemd >= 185
-%else
-Requires: udev >= 145
-%endif
%description daemon-driver-nodedev
The nodedev driver plugin for the libvirtd daemon, providing
@@ -586,9 +524,7 @@ capabilities.
Summary: Interface driver plugin for the libvirtd daemon
Requires: libvirt-daemon = %{version}-%{release}
Requires: libvirt-libs = %{version}-%{release}
-%if (0%{?fedora} || 0%{?rhel} >= 7)
Requires: netcf-libs >= 0.2.2
-%endif
%description daemon-driver-interface
The interface driver plugin for the libvirtd daemon, providing
@@ -1254,11 +1190,7 @@ exit 1
%define arg_init_script --with-init-script=redhat
%endif
-%if 0%{?fedora} || 0%{?rhel} >= 7
- %define arg_selinux_mount --with-selinux-mount="/sys/fs/selinux"
-%else
- %define arg_selinux_mount --with-selinux-mount="/selinux"
-%endif
+%define arg_selinux_mount --with-selinux-mount="/sys/fs/selinux"
%if 0%{?fedora}
# Nightly firmware repo x86/OVMF
@@ -2028,8 +1960,6 @@ exit 0
%attr(0755, root, root) %{_libexecdir}/libvirt-guests.sh
%files libs -f %{name}.lang
-# RHEL6 doesn't have 'license' macro
-%{!?_licensedir:%global license %%doc}
%license COPYING COPYING.LESSER
%config(noreplace) %{_sysconfdir}/libvirt/libvirt.conf
%config(noreplace) %{_sysconfdir}/libvirt/libvirt-admin.conf
--
2.17.1