Re: [Libvir] [RFC] Linux-VServer support

On Thu, Nov 01, 2007 at 03:09:00AM +0100, Daniel Hokka Zakrisson wrote: > Daniel Veillard wrote: > >On Wed, Oct 31, 2007 at 02:39:05PM +0100, Daniel Hokka Zakrisson wrote: > >>Daniel Veillard wrote: > >>> I looked at the code, that seems clean but I have a concern about the > >>>overall XML format. Could you paste a couple of examples. Also I think > >>>Linux-VServer and OpenVZ kind of configuration may end up with the same > >>>kind of limitations or differences, so I would like to try to harmonize > >>>both format when possible. > >>Currently, the XML format is really limited. Are there any docs on what > >>should be there, or should I just look at the other drivers? As far as > >>harmonizing with the OpenVZ driver, I'm fine with that, but it seems to > >>be pretty limited and, to some degree at least, ugly. > > > > Harmonizing the XML formats shouldn't be that hard ... > >We discussed the OpenVZ format there > > http://www.redhat.com/archives/libvir-list/2007-July/msg00347.html > >and around there earlier: > > http://www.redhat.com/archives/libvir-list/2007-March/msg00193.html > >For network settings > > http://www.redhat.com/archives/libvir-list/2007-July/msg00366.html > > > > <snip> > > After looking at the various drivers, this is what I propose: > > <domain type='vserver' id='2000'> > <name>testvm</name> > <memory>500000</memory> > <scheduler fill_rate1='100' interval1='1000'> > <cpu id='0' fill_rate1='0'/> > <cpu id='1' fill_rate1='250' interval1='1000' idle_time='1' > fill_rate2='250' interval2='1000'/> > </scheduler> > <container> > <uts hostname='testvm' machine='i586'/> > <distribution method='debootstrap' release='etch'/> > </container> > <devices> > <disk type='path' device='path'> > <source path='/vservers/testvm'/> > <target path='/'/> > </disk> > <disk type='block' device='path'> > <source dev='/dev/hda4'/> > <target path='/var'/> > </disk> > <disk type='path' device='path'> > <source path='/home/testvm'/> > <target path='/home'/> > </disk> > <interface type='vserver'> > <ip family='IPv4' address='1.2.3.4' prefix='24' interface='eth0'/> > </interface> > <interface type='vserver'> > <ip family='IPv4' address='4.3.2.1' address2='4.3.2.200' > prefix='24' type='range'/> > </interface> > <interface type='vserver'> > <ip family='IPv6' address='dead:beef:dead:beef::1' prefix='64' > interface='eth0'/> > </interface> > </devices> > </domain> That looks mostly fine to me except a few doubts about: - <scheduler> this is tuning and we need a global discussion about this we allowed something similar for OpenVZ but this need to be discussed more globally. - what are the ranges for the values of <container> elements and attributes <uts> seems to be OS metadata, we already have an <os> element in existing configs why not reuse that. - some of the <ip> args are new, i.e. have no equivalent in existing config file uses: + family: that looks okay to me, is that mandatory ? Could that be guessed from one of the addresses given ? + address2: what does that mean ? I understand one IP address being served but since there is not really a notion of physical interface why attach 2 address instead of defining 2 <interface> ? + prefix: could you explain what this means ? if it's a netmask let's use something like netmask="255.255.255.0" instead of prefix="24" > I realize this is not at all similar to what the OpenVZ driver does, but > if necessary I could update that to use a similar scheme (though limited > in testing). -- Red Hat Virtualization group http://redhat.com/virtualization/ Daniel Veillard | virtualization library http://libvirt.org/ veillard(a)redhat.com | libxml GNOME XML XSLT toolkit http://xmlsoft.org/ http://veillard.com/ | Rpmfind RPM search engine http://rpmfind.net/ -- Libvir-list mailing list Libvir-list(a)redhat.com https://www.redhat.com/mailman/listinfo/libvir-list