Hi Dave, Sorry for the delay. See below On 07/12/10 20:23, Dave Allan wrote:
Hi Harri,
I spun up a Debian testing box with the versions of libvirt, iet& open-iscsi that you're using, and it works fine for me. My pool xml is:
<pool type="iscsi"> <name>iscsitest</name> <source> <host name="localhost"/> <device path="iqn.2001-04.com.example:foobarbaz"/> </source> <target> <path>/dev/disk/by-path</path> </target> </pool>
Gives the 3 configured LUs as volumes:
Name Path ----------------------------------------- 3.0.0.0 /dev/disk/by-path/ip-127.0.0.1:3260-iscsi-iqn.2001-04.com.example:foobarbaz-lun-0 3.0.0.1 /dev/disk/by-path/ip-127.0.0.1:3260-iscsi-iqn.2001-04.com.example:foobarbaz-lun-1 3.0.0.2 /dev/disk/by-path/ip-127.0.0.1:3260-iscsi-iqn.2001-04.com.example:foobarbaz-lun-2
In my environment the new volume is not listed by virsh vol-list, even though /dev/disk/by-path shows the iscsi block devices: # virsh vol-list --pool iscsi.dpcl064 Name Path ----------------------------------------- # ls -al /dev/disk/by-path/ total 0 drwxr-xr-x 2 root root 320 Jul 15 10:56 . drwxr-xr-x 6 root root 120 Jul 15 2010 .. lrwxrwxrwx 1 root root 9 Jul 15 10:56 ip-172.19.97.183:3260-iscsi-iqn.2010-07.de.aixigo.ac.dpcl064:storage-lun-0 -> ../../sdd lrwxrwxrwx 1 root root 10 Jul 15 10:56 ip-172.19.97.183:3260-iscsi-iqn.2010-07.de.aixigo.ac.dpcl064:storage-lun-0-part1 -> ../../sdd1 lrwxrwxrwx 1 root root 10 Jul 15 10:56 ip-172.19.97.183:3260-iscsi-iqn.2010-07.de.aixigo.ac.dpcl064:storage-lun-0-part2 -> ../../sdd2 lrwxrwxrwx 1 root root 9 Jul 15 09:32 pci-0000:00:03.0-usb-0:2:1.0-scsi-0:0:0:0 -> ../../sdc lrwxrwxrwx 1 root root 9 Jul 15 09:33 pci-0000:01:0e.0-scsi-0:0:0:0 -> ../../sda : : The virt-manager GUI knows about the defined iscsi volume, so I would guess this is just a minor bug in virsh. Regards Harri