Hi all,
In same previous scenario of macvtap ,Im
not able to assign dhcp address to guest interface, and if I assign static ip
of my lan to guest interface , than also it is not able to connect to the
network..
From: libvir-list-bounces@redhat.com
[mailto:libvir-list-bounces@redhat.com] On
Behalf Of Amit Tewari
Sent: Tuesday, December 13, 2011
5:11 PM
To: xhu
Cc: libvir-list@redhat.com
Subject: Re: [libvirt] macvtap not
working on kvm
Hi,
Actually udev renames the eth0 interface
in guest to eth1 because macvtap0 has different mac address then eth0 on host..
Is there some way so that we can prevent
changing this rename of eth0 to eth1 on guest. I don’t want to change
udev files.
From: xhu [mailto:xhu@redhat.com]
Sent: Tuesday, December 13, 2011
3:01 PM
To: Amit Tewari
Cc:
Subject: Re: [libvirt] macvtap not
working on kvm
On 12/13/2011 12:59 PM, Amit Tewari wrote:
Hi all,
My test environment
Host os=rhel6.1
Guest os = rhel6.1
Libvirt=0.9.8
Kvm hypervisor
I have made this entry in guest xml file
<interface type='direct'>
<source dev='eth0'
mode='bridge'/>
<model
type='virtio'/>
<address type='pci'
domain='0x0000' bus='0x00' slot='0x03' function='0x0'/>
</interface>
Now when I start the guest
#virsh start guest
Following macvtap0 is created on host and is shown
below
#ip link show
macvtap0
51: macvtap0@eth0:
<BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UNKNOWN qlen 500
link/ether 52:54:00:55:AE:B5brd
ff:ff:ff:ff:ff:ff
but when the guest is up and I try to perform
# ifup eth0
It gives following message
“Bringing up interface eth0: Device eth0
does not seem to be present, delaying initialization.
[FAILED]”
The interface name may
change to ethN(N may be 1 or 2 ...) due to the change of guest interface mac
address.
You can log in guest and use command: "ip link show" to get the
value of N.
Then create ifcfg-ethN for it and use "ifup ethN" to start it in
guest.
Guest eth interface does not create. What is the
problem?
When I checked dmesg
on host it gives following message—“macvatp0: ipv6 routers not
present”
Please let me know how macvtap work on kvm.
DISCLAIMER:
-----------------------------------------------------------------------------------------------------------------------
The contents of this e-mail and any attachment(s) are confidential and
intended
for the named recipient(s) only.
It shall not attach any liability on the originator or NECHCL or its
affiliates. Any views or opinions presented in
this email are solely those of the author and may not necessarily reflect the
opinions of NECHCL or its affiliates.
Any form of reproduction, dissemination, copying, disclosure, modification,
distribution and / or publication of
this message without the prior written consent of the author of this e-mail is
strictly prohibited. If you have
received this email in error please delete it and notify the sender
immediately. .
-----------------------------------------------------------------------------------------------------------------------
--
libvir-list mailing list
libvir-list@redhat.com
https://www.redhat.com/mailman/listinfo/libvir-list