[PATCH v2 09/15] hw/net: Remove TYPE_ETRAX_FS_ETH device

We just removed the single machine using it (axis-dev88). Signed-off-by: Philippe Mathieu-Daudé <philmd(a)linaro.org&gt; --- include/hw/cris/etraxfs.h | 36 -- hw/net/etraxfs_eth.c | 688 -------------------------------------- hw/net/meson.build | 1 - hw/net/trace-events | 5 - 4 files changed, 730 deletions(-) delete mode 100644 include/hw/cris/etraxfs.h delete mode 100644 hw/net/etraxfs_eth.c diff --git a/include/hw/cris/etraxfs.h b/include/hw/cris/etraxfs.h deleted file mode 100644 index 6d23f6f13f..0000000000 --- a/include/hw/cris/etraxfs.h +++ /dev/null @@ -1,36 +0,0 @@ -/* - * QEMU ETRAX System Emulator - * - * Copyright (c) 2008 Edgar E. Iglesias, Axis Communications AB. - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL - * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - */ - -#ifndef HW_ETRAXFS_H -#define HW_ETRAXFS_H - -#include "net/net.h" -#include "hw/cris/etraxfs_dma.h" -#include "qapi/error.h" - -DeviceState *etraxfs_eth_init(hwaddr base, int phyaddr, - struct etraxfs_dma_client *dma_out, - struct etraxfs_dma_client *dma_in); - -#endif diff --git a/hw/net/etraxfs_eth.c b/hw/net/etraxfs_eth.c deleted file mode 100644 index 5faf20c782..0000000000 --- a/hw/net/etraxfs_eth.c +++ /dev/null @@ -1,688 +0,0 @@ -/* - * QEMU ETRAX Ethernet Controller. - * - * Copyright (c) 2008 Edgar E. Iglesias, Axis Communications AB. - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL - * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - */ - -#include "qemu/osdep.h" -#include "qapi/error.h" -#include "hw/sysbus.h" -#include "net/net.h" -#include "hw/cris/etraxfs.h" -#include "qemu/error-report.h" -#include "qemu/module.h" -#include "trace.h" -#include "qom/object.h" - -#define D(x) - -/* Advertisement control register. */ -#define ADVERTISE_10HALF 0x0020 /* Try for 10mbps half-duplex */ -#define ADVERTISE_10FULL 0x0040 /* Try for 10mbps full-duplex */ -#define ADVERTISE_100HALF 0x0080 /* Try for 100mbps half-duplex */ -#define ADVERTISE_100FULL 0x0100 /* Try for 100mbps full-duplex */ - -/* - * The MDIO extensions in the TDK PHY model were reversed engineered from the - * linux driver (PHYID and Diagnostics reg). - * TODO: Add friendly names for the register nums. - */ -struct qemu_phy -{ - uint32_t regs[32]; - - int link; - - unsigned int (*read)(struct qemu_phy *phy, unsigned int req); - void (*write)(struct qemu_phy *phy, unsigned int req, unsigned int data); -}; - -static unsigned int tdk_read(struct qemu_phy *phy, unsigned int req) -{ - int regnum; - unsigned r = 0; - - regnum = req & 0x1f; - - switch (regnum) { - case 1: - if (!phy->link) { - break; - } - /* MR1. */ - /* Speeds and modes. */ - r |= (1 << 13) | (1 << 14); - r |= (1 << 11) | (1 << 12); - r |= (1 << 5); /* Autoneg complete. */ - r |= (1 << 3); /* Autoneg able. */ - r |= (1 << 2); /* link. */ - break; - case 5: - /* Link partner ability. - We are kind; always agree with whatever best mode - the guest advertises. */ - r = 1 << 14; /* Success. */ - /* Copy advertised modes. */ - r |= phy->regs[4] & (15 << 5); - /* Autoneg support. */ - r |= 1; - break; - case 18: - { - /* Diagnostics reg. */ - int duplex = 0; - int speed_100 = 0; - - if (!phy->link) { - break; - } - - /* Are we advertising 100 half or 100 duplex ? */ - speed_100 = !!(phy->regs[4] & ADVERTISE_100HALF); - speed_100 |= !!(phy->regs[4] & ADVERTISE_100FULL); - - /* Are we advertising 10 duplex or 100 duplex ? */ - duplex = !!(phy->regs[4] & ADVERTISE_100FULL); - duplex |= !!(phy->regs[4] & ADVERTISE_10FULL); - r = (speed_100 << 10) | (duplex << 11); - } - break; - - default: - r = phy->regs[regnum]; - break; - } - trace_mdio_phy_read(regnum, r); - return r; -} - -static void -tdk_write(struct qemu_phy *phy, unsigned int req, unsigned int data) -{ - int regnum; - - regnum = req & 0x1f; - trace_mdio_phy_write(regnum, data); - switch (regnum) { - default: - phy->regs[regnum] = data; - break; - } -} - -static void -tdk_reset(struct qemu_phy *phy) -{ - phy->regs[0] = 0x3100; - /* PHY Id. */ - phy->regs[2] = 0x0300; - phy->regs[3] = 0xe400; - /* Autonegotiation advertisement reg. */ - phy->regs[4] = 0x01E1; - phy->link = 1; -} - -struct qemu_mdio -{ - /* bus. */ - int mdc; - int mdio; - - /* decoder. */ - enum { - PREAMBLE, - SOF, - OPC, - ADDR, - REQ, - TURNAROUND, - DATA - } state; - unsigned int drive; - - unsigned int cnt; - unsigned int addr; - unsigned int opc; - unsigned int req; - unsigned int data; - - struct qemu_phy *devs[32]; -}; - -static void -mdio_attach(struct qemu_mdio *bus, struct qemu_phy *phy, unsigned int addr) -{ - bus->devs[addr & 0x1f] = phy; -} - -#ifdef USE_THIS_DEAD_CODE -static void -mdio_detach(struct qemu_mdio *bus, struct qemu_phy *phy, unsigned int addr) -{ - bus->devs[addr & 0x1f] = NULL; -} -#endif - -static void mdio_read_req(struct qemu_mdio *bus) -{ - struct qemu_phy *phy; - - phy = bus->devs[bus->addr]; - if (phy && phy->read) { - bus->data = phy->read(phy, bus->req); - } else { - bus->data = 0xffff; - } -} - -static void mdio_write_req(struct qemu_mdio *bus) -{ - struct qemu_phy *phy; - - phy = bus->devs[bus->addr]; - if (phy && phy->write) { - phy->write(phy, bus->req, bus->data); - } -} - -static void mdio_cycle(struct qemu_mdio *bus) -{ - bus->cnt++; - - trace_mdio_bitbang(bus->mdc, bus->mdio, bus->state, bus->cnt, bus->drive); -#if 0 - if (bus->mdc) { - printf("%d", bus->mdio); - } -#endif - switch (bus->state) { - case PREAMBLE: - if (bus->mdc) { - if (bus->cnt >= (32 * 2) && !bus->mdio) { - bus->cnt = 0; - bus->state = SOF; - bus->data = 0; - } - } - break; - case SOF: - if (bus->mdc) { - if (bus->mdio != 1) { - printf("WARNING: no SOF\n"); - } - if (bus->cnt == 1*2) { - bus->cnt = 0; - bus->opc = 0; - bus->state = OPC; - } - } - break; - case OPC: - if (bus->mdc) { - bus->opc <<= 1; - bus->opc |= bus->mdio & 1; - if (bus->cnt == 2*2) { - bus->cnt = 0; - bus->addr = 0; - bus->state = ADDR; - } - } - break; - case ADDR: - if (bus->mdc) { - bus->addr <<= 1; - bus->addr |= bus->mdio & 1; - - if (bus->cnt == 5*2) { - bus->cnt = 0; - bus->req = 0; - bus->state = REQ; - } - } - break; - case REQ: - if (bus->mdc) { - bus->req <<= 1; - bus->req |= bus->mdio & 1; - if (bus->cnt == 5*2) { - bus->cnt = 0; - bus->state = TURNAROUND; - } - } - break; - case TURNAROUND: - if (bus->mdc && bus->cnt == 2*2) { - bus->mdio = 0; - bus->cnt = 0; - - if (bus->opc == 2) { - bus->drive = 1; - mdio_read_req(bus); - bus->mdio = bus->data & 1; - } - bus->state = DATA; - } - break; - case DATA: - if (!bus->mdc) { - if (bus->drive) { - bus->mdio = !!(bus->data & (1 << 15)); - bus->data <<= 1; - } - } else { - if (!bus->drive) { - bus->data <<= 1; - bus->data |= bus->mdio; - } - if (bus->cnt == 16 * 2) { - bus->cnt = 0; - bus->state = PREAMBLE; - if (!bus->drive) { - mdio_write_req(bus); - } - bus->drive = 0; - } - } - break; - default: - break; - } -} - -/* ETRAX-FS Ethernet MAC block starts here. */ - -#define RW_MA0_LO 0x00 -#define RW_MA0_HI 0x01 -#define RW_MA1_LO 0x02 -#define RW_MA1_HI 0x03 -#define RW_GA_LO 0x04 -#define RW_GA_HI 0x05 -#define RW_GEN_CTRL 0x06 -#define RW_REC_CTRL 0x07 -#define RW_TR_CTRL 0x08 -#define RW_CLR_ERR 0x09 -#define RW_MGM_CTRL 0x0a -#define R_STAT 0x0b -#define FS_ETH_MAX_REGS 0x17 - -#define TYPE_ETRAX_FS_ETH "etraxfs-eth" -OBJECT_DECLARE_SIMPLE_TYPE(ETRAXFSEthState, ETRAX_FS_ETH) - -struct ETRAXFSEthState { - SysBusDevice parent_obj; - - MemoryRegion mmio; - NICState *nic; - NICConf conf; - - /* Two addrs in the filter. */ - uint8_t macaddr[2][6]; - uint32_t regs[FS_ETH_MAX_REGS]; - - struct etraxfs_dma_client *dma_out; - struct etraxfs_dma_client *dma_in; - - /* MDIO bus. */ - struct qemu_mdio mdio_bus; - unsigned int phyaddr; - int duplex_mismatch; - - /* PHY. */ - struct qemu_phy phy; -}; - -static void eth_validate_duplex(ETRAXFSEthState *eth) -{ - struct qemu_phy *phy; - unsigned int phy_duplex; - unsigned int mac_duplex; - int new_mm = 0; - - phy = eth->mdio_bus.devs[eth->phyaddr]; - phy_duplex = !!(phy->read(phy, 18) & (1 << 11)); - mac_duplex = !!(eth->regs[RW_REC_CTRL] & 128); - - if (mac_duplex != phy_duplex) { - new_mm = 1; - } - - if (eth->regs[RW_GEN_CTRL] & 1) { - if (new_mm != eth->duplex_mismatch) { - if (new_mm) { - printf("HW: WARNING ETH duplex mismatch MAC=%d PHY=%d\n", - mac_duplex, phy_duplex); - } else { - printf("HW: ETH duplex ok.\n"); - } - } - eth->duplex_mismatch = new_mm; - } -} - -static uint64_t -eth_read(void *opaque, hwaddr addr, unsigned int size) -{ - ETRAXFSEthState *eth = opaque; - uint32_t r = 0; - - addr >>= 2; - - switch (addr) { - case R_STAT: - r = eth->mdio_bus.mdio & 1; - break; - default: - r = eth->regs[addr]; - D(printf("%s %x\n", __func__, addr * 4)); - break; - } - return r; -} - -static void eth_update_ma(ETRAXFSEthState *eth, int ma) -{ - int reg; - int i = 0; - - ma &= 1; - - reg = RW_MA0_LO; - if (ma) { - reg = RW_MA1_LO; - } - - eth->macaddr[ma][i++] = eth->regs[reg]; - eth->macaddr[ma][i++] = eth->regs[reg] >> 8; - eth->macaddr[ma][i++] = eth->regs[reg] >> 16; - eth->macaddr[ma][i++] = eth->regs[reg] >> 24; - eth->macaddr[ma][i++] = eth->regs[reg + 1]; - eth->macaddr[ma][i] = eth->regs[reg + 1] >> 8; - - D(printf("set mac%d=%x.%x.%x.%x.%x.%x\n", ma, - eth->macaddr[ma][0], eth->macaddr[ma][1], - eth->macaddr[ma][2], eth->macaddr[ma][3], - eth->macaddr[ma][4], eth->macaddr[ma][5])); -} - -static void -eth_write(void *opaque, hwaddr addr, - uint64_t val64, unsigned int size) -{ - ETRAXFSEthState *eth = opaque; - uint32_t value = val64; - - addr >>= 2; - switch (addr) { - case RW_MA0_LO: - case RW_MA0_HI: - eth->regs[addr] = value; - eth_update_ma(eth, 0); - break; - case RW_MA1_LO: - case RW_MA1_HI: - eth->regs[addr] = value; - eth_update_ma(eth, 1); - break; - - case RW_MGM_CTRL: - /* Attach an MDIO/PHY abstraction. */ - if (value & 2) { - eth->mdio_bus.mdio = value & 1; - } - if (eth->mdio_bus.mdc != (value & 4)) { - mdio_cycle(&eth->mdio_bus); - eth_validate_duplex(eth); - } - eth->mdio_bus.mdc = !!(value & 4); - eth->regs[addr] = value; - break; - - case RW_REC_CTRL: - eth->regs[addr] = value; - eth_validate_duplex(eth); - break; - - default: - eth->regs[addr] = value; - D(printf("%s %x %x\n", __func__, addr, value)); - break; - } -} - -/* The ETRAX FS has a groupt address table (GAT) which works like a k=1 bloom - filter dropping group addresses we have not joined. The filter has 64 - bits (m). The has function is a simple nible xor of the group addr. */ -static int eth_match_groupaddr(ETRAXFSEthState *eth, const unsigned char *sa) -{ - unsigned int hsh; - int m_individual = eth->regs[RW_REC_CTRL] & 4; - int match; - - /* First bit on the wire of a MAC address signals multicast or - physical address. */ - if (!m_individual && !(sa[0] & 1)) { - return 0; - } - - /* Calculate the hash index for the GA registers. */ - hsh = 0; - hsh ^= (*sa) & 0x3f; - hsh ^= ((*sa) >> 6) & 0x03; - ++sa; - hsh ^= ((*sa) << 2) & 0x03c; - hsh ^= ((*sa) >> 4) & 0xf; - ++sa; - hsh ^= ((*sa) << 4) & 0x30; - hsh ^= ((*sa) >> 2) & 0x3f; - ++sa; - hsh ^= (*sa) & 0x3f; - hsh ^= ((*sa) >> 6) & 0x03; - ++sa; - hsh ^= ((*sa) << 2) & 0x03c; - hsh ^= ((*sa) >> 4) & 0xf; - ++sa; - hsh ^= ((*sa) << 4) & 0x30; - hsh ^= ((*sa) >> 2) & 0x3f; - - hsh &= 63; - if (hsh > 31) { - match = eth->regs[RW_GA_HI] & (1 << (hsh - 32)); - } else { - match = eth->regs[RW_GA_LO] & (1 << hsh); - } - D(printf("hsh=%x ga=%x.%x mtch=%d\n", hsh, - eth->regs[RW_GA_HI], eth->regs[RW_GA_LO], match)); - return match; -} - -static ssize_t eth_receive(NetClientState *nc, const uint8_t *buf, size_t size) -{ - unsigned char sa_bcast[6] = {0xff, 0xff, 0xff, 0xff, 0xff, 0xff }; - ETRAXFSEthState *eth = qemu_get_nic_opaque(nc); - int use_ma0 = eth->regs[RW_REC_CTRL] & 1; - int use_ma1 = eth->regs[RW_REC_CTRL] & 2; - int r_bcast = eth->regs[RW_REC_CTRL] & 8; - - if (size < 12) { - return -1; - } - - D(printf("%x.%x.%x.%x.%x.%x ma=%d %d bc=%d\n", - buf[0], buf[1], buf[2], buf[3], buf[4], buf[5], - use_ma0, use_ma1, r_bcast)); - - /* Does the frame get through the address filters? */ - if ((!use_ma0 || memcmp(buf, eth->macaddr[0], 6)) - && (!use_ma1 || memcmp(buf, eth->macaddr[1], 6)) - && (!r_bcast || memcmp(buf, sa_bcast, 6)) - && !eth_match_groupaddr(eth, buf)) { - return size; - } - - /* FIXME: Find another way to pass on the fake csum. */ - etraxfs_dmac_input(eth->dma_in, (void *)buf, size + 4, 1); - - return size; -} - -static int eth_tx_push(void *opaque, unsigned char *buf, int len, bool eop) -{ - ETRAXFSEthState *eth = opaque; - - D(printf("%s buf=%p len=%d\n", __func__, buf, len)); - qemu_send_packet(qemu_get_queue(eth->nic), buf, len); - return len; -} - -static void eth_set_link(NetClientState *nc) -{ - ETRAXFSEthState *eth = qemu_get_nic_opaque(nc); - D(printf("%s %d\n", __func__, nc->link_down)); - eth->phy.link = !nc->link_down; -} - -static const MemoryRegionOps eth_ops = { - .read = eth_read, - .write = eth_write, - .endianness = DEVICE_LITTLE_ENDIAN, - .valid = { - .min_access_size = 4, - .max_access_size = 4 - } -}; - -static NetClientInfo net_etraxfs_info = { - .type = NET_CLIENT_DRIVER_NIC, - .size = sizeof(NICState), - .receive = eth_receive, - .link_status_changed = eth_set_link, -}; - -static void etraxfs_eth_reset(DeviceState *dev) -{ - ETRAXFSEthState *s = ETRAX_FS_ETH(dev); - - memset(s->regs, 0, sizeof(s->regs)); - memset(s->macaddr, 0, sizeof(s->macaddr)); - s->duplex_mismatch = 0; - - s->mdio_bus.mdc = 0; - s->mdio_bus.mdio = 0; - s->mdio_bus.state = 0; - s->mdio_bus.drive = 0; - s->mdio_bus.cnt = 0; - s->mdio_bus.addr = 0; - s->mdio_bus.opc = 0; - s->mdio_bus.req = 0; - s->mdio_bus.data = 0; - - tdk_reset(&s->phy); -} - -static void etraxfs_eth_realize(DeviceState *dev, Error **errp) -{ - SysBusDevice *sbd = SYS_BUS_DEVICE(dev); - ETRAXFSEthState *s = ETRAX_FS_ETH(dev); - - if (!s->dma_out || !s->dma_in) { - error_setg(errp, "Unconnected ETRAX-FS Ethernet MAC"); - return; - } - - s->dma_out->client.push = eth_tx_push; - s->dma_out->client.opaque = s; - s->dma_in->client.opaque = s; - s->dma_in->client.pull = NULL; - - memory_region_init_io(&s->mmio, OBJECT(dev), &eth_ops, s, - "etraxfs-eth", 0x5c); - sysbus_init_mmio(sbd, &s->mmio); - - qemu_macaddr_default_if_unset(&s->conf.macaddr); - s->nic = qemu_new_nic(&net_etraxfs_info, &s->conf, - object_get_typename(OBJECT(s)), dev->id, - &dev->mem_reentrancy_guard, s); - qemu_format_nic_info_str(qemu_get_queue(s->nic), s->conf.macaddr.a); - - s->phy.read = tdk_read; - s->phy.write = tdk_write; - mdio_attach(&s->mdio_bus, &s->phy, s->phyaddr); -} - -static Property etraxfs_eth_properties[] = { - DEFINE_PROP_UINT32("phyaddr", ETRAXFSEthState, phyaddr, 1), - DEFINE_NIC_PROPERTIES(ETRAXFSEthState, conf), - DEFINE_PROP_END_OF_LIST(), -}; - -static void etraxfs_eth_class_init(ObjectClass *klass, void *data) -{ - DeviceClass *dc = DEVICE_CLASS(klass); - - dc->realize = etraxfs_eth_realize; - dc->reset = etraxfs_eth_reset; - device_class_set_props(dc, etraxfs_eth_properties); - /* Reason: dma_out, dma_in are not user settable */ - dc->user_creatable = false; -} - - -/* Instantiate an ETRAXFS Ethernet MAC. */ -DeviceState * -etraxfs_eth_init(hwaddr base, int phyaddr, - struct etraxfs_dma_client *dma_out, - struct etraxfs_dma_client *dma_in) -{ - DeviceState *dev; - - dev = qdev_new("etraxfs-eth"); - qemu_configure_nic_device(dev, true, "fseth"); - qdev_prop_set_uint32(dev, "phyaddr", phyaddr); - - /* - * TODO: QOM design, define a QOM interface for "I am an etraxfs - * DMA client" (which replaces the current 'struct - * etraxfs_dma_client' ad-hoc interface), implement it on the - * ethernet device, and then have QOM link properties on the DMA - * controller device so that you can pass the interface - * implementations to it. - */ - ETRAX_FS_ETH(dev)->dma_out = dma_out; - ETRAX_FS_ETH(dev)->dma_in = dma_in; - sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), &error_fatal); - sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, base); - - return dev; -} - -static const TypeInfo etraxfs_eth_info = { - .name = TYPE_ETRAX_FS_ETH, - .parent = TYPE_SYS_BUS_DEVICE, - .instance_size = sizeof(ETRAXFSEthState), - .class_init = etraxfs_eth_class_init, -}; - -static void etraxfs_eth_register_types(void) -{ - type_register_static(&etraxfs_eth_info); -} - -type_init(etraxfs_eth_register_types) diff --git a/hw/net/meson.build b/hw/net/meson.build index b7426870e8..00a9e9dd51 100644 --- a/hw/net/meson.build +++ b/hw/net/meson.build @@ -40,7 +40,6 @@ system_ss.add(when: 'CONFIG_FTGMAC100', if_true: files('ftgmac100.c')) system_ss.add(when: 'CONFIG_SUNGEM', if_true: files('sungem.c')) system_ss.add(when: 'CONFIG_NPCM7XX', if_true: files('npcm7xx_emc.c', 'npcm_gmac.c')) -system_ss.add(when: 'CONFIG_ETRAXFS', if_true: files('etraxfs_eth.c')) system_ss.add(when: 'CONFIG_COLDFIRE', if_true: files('mcf_fec.c')) specific_ss.add(when: 'CONFIG_PSERIES', if_true: files('spapr_llan.c')) system_ss.add(when: 'CONFIG_XILINX_ETHLITE', if_true: files('xilinx_ethlite.c')) diff --git a/hw/net/trace-events b/hw/net/trace-events index 78efa2ec2c..4c6687923e 100644 --- a/hw/net/trace-events +++ b/hw/net/trace-events @@ -10,11 +10,6 @@ allwinner_sun8i_emac_set_link(bool active) "Set link: active=%u" allwinner_sun8i_emac_read(uint64_t offset, uint64_t val) "MMIO read: offset=0x%" PRIx64 " value=0x%" PRIx64 allwinner_sun8i_emac_write(uint64_t offset, uint64_t val) "MMIO write: offset=0x%" PRIx64 " value=0x%" PRIx64 -# etraxfs_eth.c -mdio_phy_read(int regnum, uint16_t value) "read phy_reg:%d value:0x%04x" -mdio_phy_write(int regnum, uint16_t value) "write phy_reg:%d value:0x%04x" -mdio_bitbang(bool mdc, bool mdio, int state, uint16_t cnt, unsigned int drive) "bitbang mdc=%u mdio=%u state=%d cnt=%u drv=%d" - # lance.c lance_mem_readw(uint64_t addr, uint32_t ret) "addr=0x%"PRIx64"val=0x%04x" lance_mem_writew(uint64_t addr, uint32_t val) "addr=0x%"PRIx64"val=0x%04x" -- 2.45.2