Re: [libvirt] [PATCH 1/3] leasetime support for <dhcp> globally

On 06/21/2017 03:27 AM, Peter Krempa wrote: > On Tue, Jun 20, 2017 at 19:00:43 +0100, aruiz(a)gnome.org wrote: >> From: Alberto Ruiz <aruiz(a)gnome.org&gt; > > Missing commit message. And when composing the commit message, it's useful to include links to the associated BZ. https://bugzilla.redhat.com/show_bug.cgi?id=913446 Also, I recall there being quite a lot of discussion in email (and possibly IRC) about the fact that people *think* they want a configurable lease time because they think that will eliminate cases of a DHCP lease being lost while a domain is paused. It was pointed out that lengthening the lease will *not* eliminate that problem (it just makes it happen less often). As an alternate (and better) solution to the problem of lost leases, we then added the "dhcp-authoritative" option to dnsmasq (commit 4ac20b3ae4), which allows clients to re-acquire the same IP as they had for an expired lease (as long as it hasn't been acquired by someone else in the meantime, which is apparently unlikely unless all the other addresses in the pool are already assigned). I'm not saying this to discourage the idea of making leasetime configurable (I think we'd already agreed that it was reasonable to do so, but there were two competing patches posted, and neither of them was really push-ready), but just to make sure that nobody is disappointed if the results don't lead to the behavior they're hoping for. > >> >> --- >> docs/schemas/basictypes.rng | 16 +++++ >> docs/schemas/network.rng | 8 +++ >> src/conf/network_conf.c | 78 ++++++++++++++++++++++- >> src/conf/network_conf.h | 3 +- >> src/network/bridge_driver.c | 49 +++++++++++++- >> tests/networkxml2confdata/leasetime-days.conf | 17 +++++ >> tests/networkxml2confdata/leasetime-days.xml | 18 ++++++ >> tests/networkxml2confdata/leasetime-hours.conf | 17 +++++ >> tests/networkxml2confdata/leasetime-hours.xml | 18 ++++++ >> tests/networkxml2confdata/leasetime-infinite.conf | 17 +++++ >> tests/networkxml2confdata/leasetime-infinite.xml | 18 ++++++ >> tests/networkxml2confdata/leasetime-minutes.conf | 17 +++++ >> tests/networkxml2confdata/leasetime-minutes.xml | 18 ++++++ >> tests/networkxml2confdata/leasetime-seconds.conf | 17 +++++ >> tests/networkxml2confdata/leasetime-seconds.xml | 18 ++++++ >> tests/networkxml2confdata/leasetime.conf | 17 +++++ >> tests/networkxml2confdata/leasetime.xml | 18 ++++++ >> tests/networkxml2conftest.c | 7 ++ >> 18 files changed, 368 insertions(+), 3 deletions(-) >> create mode 100644 tests/networkxml2confdata/leasetime-days.conf >> create mode 100644 tests/networkxml2confdata/leasetime-days.xml >> create mode 100644 tests/networkxml2confdata/leasetime-hours.conf >> create mode 100644 tests/networkxml2confdata/leasetime-hours.xml >> create mode 100644 tests/networkxml2confdata/leasetime-infinite.conf >> create mode 100644 tests/networkxml2confdata/leasetime-infinite.xml >> create mode 100644 tests/networkxml2confdata/leasetime-minutes.conf >> create mode 100644 tests/networkxml2confdata/leasetime-minutes.xml >> create mode 100644 tests/networkxml2confdata/leasetime-seconds.conf >> create mode 100644 tests/networkxml2confdata/leasetime-seconds.xml >> create mode 100644 tests/networkxml2confdata/leasetime.conf >> create mode 100644 tests/networkxml2confdata/leasetime.xml >> >> diff --git a/docs/schemas/basictypes.rng b/docs/schemas/basictypes.rng >> index 1b4f980e7..8a76c235a 100644 >> --- a/docs/schemas/basictypes.rng >> +++ b/docs/schemas/basictypes.rng >> @@ -518,4 +518,20 @@ >> </element> >> </define> >> >> + <define name="leaseTimeUnit"> >> + <choice> >> + <value>seconds</value> >> + <value>minutes</value> >> + <value>hours</value> >> + <value>days</value> >> + </choice> >> + </define> Maybe call this "timeUnit" in case some other attribute in the future needs it? >> + >> + <define name="leaseTime"> >> + <data type="long"> >> + <param name="minInclusive">-1</param> >> + <param name="maxInclusive">4294967295</param> >> + </data> >> + </define> >> + >> </grammar> >> diff --git a/docs/schemas/network.rng b/docs/schemas/network.rng >> index 1a18e64b2..4b8056ab6 100644 >> --- a/docs/schemas/network.rng >> +++ b/docs/schemas/network.rng >> @@ -340,6 +340,14 @@ >> <!-- Define the range(s) of IP addresses that the DHCP >> server should hand out --> >> <element name="dhcp"> >> + <optional> >> + <element name="leasetime"> >> + <optional> >> + <attribute name="unit"><ref name="leaseTimeUnit"/></attribute> > > This does not follow the XML style used everywhere else. > >> + </optional> >> + <ref name="leaseTime"/> >> + </element> >> + </optional> >> <zeroOrMore> >> <element name="range"> >> <attribute name="start"><ref name="ipAddr"/></attribute> >> diff --git a/src/conf/network_conf.c b/src/conf/network_conf.c >> index aa397768c..6f051493f 100644 >> --- a/src/conf/network_conf.c >> +++ b/src/conf/network_conf.c >> @@ -30,6 +30,8 @@ >> #include <fcntl.h> >> #include <string.h> >> #include <dirent.h> >> +#include <stdlib.h> >> +#include <inttypes.h> >> >> #include "virerror.h" >> #include "datatypes.h" >> @@ -1031,12 +1033,82 @@ virNetworkDHCPHostDefParseXML(const char *networkName, >> return ret; >> } >> >> +static int64_t >> +virNetworkDHCPDefGetLeaseTime (xmlNodePtr node, While it's true that this function "gets" the lease time from the xmlDoc, this is part of the process of parsing the XML, so it should be named virNetworkDHCPLeaseTimeParseXML(). (it's never been clear to me when/where the "Def" part of the name should be; I've always seen it as just three extra letters that add nothing; someone else may have a different opinion). >> + xmlXPathContextPtr ctxt, >> + bool *error) > > We usually return error from the function and if necessary return the > value through pointer in arguments (backwards as you did). > >> +{ >> + int64_t multiplier, result = -1; >> + char *leaseString, *leaseUnit; >> + xmlNodePtr save; >> + >> + *error = 0; >> + >> + save = ctxt->node; >> + ctxt->node = node; >> + >> + leaseString = virXPathString ("string(./leasetime/text())", ctxt); >> + leaseUnit = virXPathString ("string(./leasetime/@unit)", ctxt); >> + >> + /* If value is not present we set the value to -2 */ >> + if (leaseString == NULL) { >> + result = -2; >> + goto cleanup; >> + } >> + >> + if (leaseUnit == NULL || strcmp (leaseUnit, "seconds") == 0) >> + multiplier = 1; >> + else if (strcmp (leaseUnit, "minutes") == 0) >> + multiplier = 60; >> + else if (strcmp (leaseUnit, "hours") == 0) >> + multiplier = 60 * 60; >> + else if (strcmp (leaseUnit, "days") == 0) >> + multiplier = 60 * 60 * 24; >> + else { >> + virReportError(VIR_ERR_XML_ERROR, >> + _("invalid value for unit parameter in <leasetime> element found in <dhcp> network, " >> + "only 'seconds', 'minutes', 'hours' or 'days' are valid: %s"), >> + leaseUnit); >> + *error = 1; >> + goto cleanup; >> + } > > Does not follow libvirt coding style. In particular - if one clause of an if-else is in braces, then *all* of the clauses of that if-else much be in braces. > >> + >> + errno = 0; >> + result = (int64_t) strtoll((const char*)leaseString, NULL, 10); >> + >> + /* Report any errors parsing the string */ >> + if (errno != 0) { >> + virReportError(VIR_ERR_XML_ERROR, >> + _("<leasetime> value could not be converted to a signed integer: %s"), >> + leaseString); >> + *error = 1; >> + goto cleanup; >> + } >> + >> + result = result * multiplier; >> + >> + if (result > UINT32_MAX) { >> + virReportError(VIR_ERR_XML_ERROR, >> + _("<leasetime> value cannot be greater than the equivalent of %" PRIo32 " seconds : %" PRId64), We don't use gnulib's "PRIxxx" macros anywhere else in libvirt. Better to "go with the flow" and just use "%d" instead for consistency (or make a case for changing them elsewhere :-)

>> + UINT32_MAX, result); > > Lines are too long > >> + *error = 1; >> + } >> + >> +cleanup: >> + VIR_FREE(leaseString); >> + VIR_FREE(leaseUnit); >> + ctxt->node = save; >> + return result; >> +} >> + >> static int >> virNetworkDHCPDefParseXML(const char *networkName, >> xmlNodePtr node, >> + xmlXPathContextPtr ctxt, >> virNetworkIPDefPtr def) >> { >> int ret = -1; >> + bool error; >> xmlNodePtr cur; >> virSocketAddrRange range; >> virNetworkDHCPHostDef host; >> @@ -1044,6 +1116,10 @@ virNetworkDHCPDefParseXML(const char *networkName, >> memset(&range, 0, sizeof(range)); >> memset(&host, 0, sizeof(host)); >> >> + def->leasetime = virNetworkDHCPDefGetLeaseTime (node, ctxt, &error); > > This won't pass syntax-check > >> + if (error) >> + goto cleanup; >> + >> cur = node->children; >> while (cur != NULL) { >> if (cur->type == XML_ELEMENT_NODE && >> @@ -1607,7 +1683,7 @@ virNetworkIPDefParseXML(const char *networkName, >> while (cur != NULL) { >> if (cur->type == XML_ELEMENT_NODE && >> xmlStrEqual(cur->name, BAD_CAST "dhcp")) { >> - if (virNetworkDHCPDefParseXML(networkName, cur, def) < 0) >> + if (virNetworkDHCPDefParseXML(networkName, cur, ctxt, def) < 0) >> goto cleanup; >> } else if (cur->type == XML_ELEMENT_NODE && >> xmlStrEqual(cur->name, BAD_CAST "tftp")) { >> diff --git a/src/conf/network_conf.h b/src/conf/network_conf.h >> index 3b227db6f..f7557f581 100644 >> --- a/src/conf/network_conf.h >> +++ b/src/conf/network_conf.h >> @@ -170,7 +170,8 @@ struct _virNetworkIPDef { >> char *tftproot; >> char *bootfile; >> virSocketAddr bootserver; >> - }; >> + int64_t leasetime; >> +}; >> >> typedef struct _virNetworkForwardIfDef virNetworkForwardIfDef; >> typedef virNetworkForwardIfDef *virNetworkForwardIfDefPtr; >> diff --git a/src/network/bridge_driver.c b/src/network/bridge_driver.c >> index 7b99acafa..e51e469c8 100644 >> --- a/src/network/bridge_driver.c >> +++ b/src/network/bridge_driver.c >> @@ -41,6 +41,8 @@ >> #include <sys/ioctl.h> >> #include <net/if.h> >> #include <dirent.h> >> +#include <inttypes.h> >> +#include <stdint.h> >> #if HAVE_SYS_SYSCTL_H >> # include <sys/sysctl.h> >> #endif >> @@ -903,6 +905,40 @@ networkBuildDnsmasqHostsList(dnsmasqContext *dctx, >> return 0; >> } >> >> +/* translates the leasetime value into a dnsmasq configuration string for dhcp-range/host */ >> +static char * >> +networkDnsmasqConfLeaseValueToString (int64_t leasetime) >> +{ >> + char *result = NULL; >> + virBuffer leasebuf = VIR_BUFFER_INITIALIZER; >> + >> + /* Leasetime parameter set on the XML */ >> + /* Less than -1 means there was no value set */ >> + if (leasetime < -1) { >> + virBufferAsprintf(&leasebuf, "%s", ""); >> + } >> + /* -1 means no expiration */ >> + else if (leasetime == -1) I *think* this is what you currently have: -1 : infinite 0/unspecified : unspecified (use default) > 0 : actual lease time. How about this instead? In the xml: 0 : infinite unspecified : unspecified > 0 : actual lease time In the internal object: have a separate "bool leasetime_specified" to differentiate between "0" and unspecified (there are a few other examples of this - search for "_specified" in src/conf/*.c) >> + virBufferAsprintf(&leasebuf, ",infinite"); >> + /* Minimum expiry value is 120 */ >> + /* TODO: Discuss if we should up as we do here or just forward whatever value to dnsmasq */ >> + else if (leasetime < 120) >> + virBufferAsprintf(&leasebuf, ",120"); >> + /* DHCP value for lease time is a unsigned four octect integer */ >> + else if (leasetime <= UINT32_MAX) >> + virBufferAsprintf(&leasebuf, ",%" PRId64, leasetime); >> + /* TODO: Discuss the use of "deprecated" for ipv6*/ I'm not sure how useful this would be for libvirt, since it's apparently used when renumbering a network. I think for now it can be ignored. >> + /* TODO: Discuss what is the default value that we want as dnsmasq's is 1 hour */ Whatever the value has been for all these years, it needs to remain the same. Behavior should be unchanged if the XML is unchanged. >> + /* TODO: Discuss what to do if value exceeds maximum, use default value for now */ If the specified value is too large, we need to log an error and fail. If we were to just ignore invalid values now, it makes it more difficult to change it to an error later (you would then have to validate it only when a definition is newly defined or edited, but not when all the configs are read at libvirtd startup). >> + else { >> + virBufferAsprintf(&leasebuf, "%s", ""); >> + } >> + >> + result = virBufferContentAndReset(&leasebuf); >> + virBufferFreeAndReset (&leasebuf); >> + >> + return result; >> +} >> >> int >> networkDnsmasqConfContents(virNetworkObjPtr network, >> @@ -1213,6 +1249,7 @@ networkDnsmasqConfContents(virNetworkObjPtr network, >> } >> for (r = 0; r < ipdef->nranges; r++) { >> int thisRange; >> + char *leasestr; >> >> if (!(saddr = virSocketAddrFormat(&ipdef->ranges[r].start)) || >> !(eaddr = virSocketAddrFormat(&ipdef->ranges[r].end))) >> @@ -1220,12 +1257,22 @@ networkDnsmasqConfContents(virNetworkObjPtr network, >> >> virBufferAsprintf(&configbuf, "dhcp-range=%s,%s", >> saddr, eaddr); >> - if (VIR_SOCKET_ADDR_IS_FAMILY(&ipdef->address, AF_INET6)) >> + >> + /* Add ipv6 prefix length parameter if needed */ >> + if (ipdef == ipv6def) >> virBufferAsprintf(&configbuf, ",%d", prefix); >> + >> + leasestr = networkDnsmasqConfLeaseValueToString (ipdef->leasetime); >> + if (!leasestr) >> + goto cleanup; >> + virBufferAsprintf(&configbuf, "%s", leasestr); >> + >> + /* Add the newline */ >> virBufferAddLit(&configbuf, "\n"); >> >> VIR_FREE(saddr); >> VIR_FREE(eaddr); >> + VIR_FREE(leasestr); >> thisRange = virSocketAddrGetRange(&ipdef->ranges[r].start, >> &ipdef->ranges[r].end, >> &ipdef->address, > > Also this patch does not apply to current master. > > Peter > > > > -- > libvir-list mailing list > libvir-list(a)redhat.com > https://www.redhat.com/mailman/listinfo/libvir-list >