8:22 a.m.
From: "Daniel P. Berrange" <berrange(a)redhat.com>
NB: this is in response to a Fedora 17 beta blocker bug.
Currently gnome-boxes depends on 'libvirt' which pulls
in the default virtual network, which kills networking
if you install Fedora 17 inside a KVM guest.
There are a number of flaws with our packaging of the libvirtd
daemon:
- Installing 'libvirt' does not install 'qemu-kvm' or 'xen'
etc which are required to actually run the hypervisor in
question
- Installing 'libvirt' pulls in the default configuration
files which may not be wanted & cause problems if installed
inside a guest
- It is not possible to explicitly required all the peices
required to manage a specific hypervisor
This change takes the 'libvirt' RPM and and changes it thus
- libvirt: just a virtual package with dep on libvirt-daemon and
libvirt-daemon-configs
- libvirt-daemon: the libvirt daemon and related pieces
- libvirt-daemon-configs: the default network & filter configs
- libvirt-docs: the website HTML
We then introduce some more virtual (empty) packages
- libvirt-daemon-qemu: Deps on libvirt-daemon & 'qemu'
- libvirt-daemon-kvm: Deps on libvirt-daemon & 'qemu-kvm'
- libvirt-daemon-lxc: Deps on libvirt-daemon
- libvirt-daemon-uml: Deps on libvirt-daemon
- libvirt-daemon-xen: Deps on libvirt-daemon & 'xen'
- libvirt-qemu: Deps on libvirt-daemon-qemu & libvirt-daemon-configs
- libvirt-kvm: Deps on libvirt-daemon-kvm & libvirt-daemon-configs
- libvirt-lxc: Deps on libvirt-daemon-lxc & libvirt-daemon-configs
- libvirt-uml: Deps on libvirt-daemon-uml & libvirt-daemon-configs
- libvirt-xen: Deps on libvirt-daemon-xen & libvirt-daemon-configs
My intent in the future is to turn on the driver modules by
default, at which time 'libvirt-daemon' will cease to include
any specific drivers, instead we'll get libvirt-daemon-driver-XXXX
packages for each driver. The libvirt-daemon-XXX packages will
then pull in each driver that they require.
It is recommended that applications required a locally installed
libvirtd daemon, use either 'Requires: libvirt-daemon-XXXX' or
'Requires: libvirt-XXX' and *not* "Requires: libvirt-daemon"
or 'Requires: libvirt'
* libvirt.spec.in: Refactor RPMs
* docs/packaging.html.in, docs/sitemap.html.in: Document
new RPM split rationale
---
docs/packaging.html.in | 100 ++++++++++
docs/sitemap.html.in | 4 +
libvirt.spec.in | 474 +++++++++++++++++++++++++++++++++++-------------
3 files changed, 456 insertions(+), 122 deletions(-)
create mode 100644 docs/packaging.html.in
diff --git a/docs/packaging.html.in b/docs/packaging.html.in
new file mode 100644
index 0000000..2e4abf7
--- /dev/null
+++ b/docs/packaging.html.in
@@ -0,0 +1,100 @@
+<?xml version="1.0"?>
+<html>
+ <body>
+ <h1>Distribution packaging</h1>
+
+ <ul id="toc"></ul>
+
+ <p>
+ This page describes the rationale behind the libvirt distribution
+packaging in RPM format. The RPM specfile provided with libvirt targets
+all Fedora and RHEL releases. It is split up into a number of sub-RPMs
+in order to facilitate minimal installations, targetting specific
+feature sets.
+ </p>
+
+ <h2>Real packages</h2>
+
+ <p>
+ The so called "real" packages provide the actual file payloads
+ related to libvirt. If very specific / targetted functionality
+ is required, then applications can depend on one or more of these
+ real packages.
+ </p>
+
+ <dl>
+ <dt>libvirt-client</dt>
+ <dd>This package provides the main libvirt.so library along with the virsh
command line tool.
+ If a C based application only wants to be able to manage remote hypervisors, this
is all
+ that they need depend on</dd>
+ <dt>libvirt-devel</dt>
+ <dd>This package provides the header files and libraries required to compile
and link C
+ applications using libvirt</dd>
+ <dt>libvirt-python</dt>
+ <dd>This package provides the Python binding to the C libraries. It will pull
in the libvirt-client
+ RPM. If a Python application only wants to be able to manage remote hypervisors,
this is all that
+ they need depend on</dd>
+ <dt>libvirt-daemon</dt>
+ <dd>This package provides server side libvirtd daemon, which is required in
order to
+ manage any stateful hypervisors (currently QEMU, KVM, Xen, LXC and
UML).</dd>
+ <dt>libvirt-daemon-configs</dt>
+ <dd>This package provides the standard configuration files for setting up a
NAT
+ based network, and network filter rules for ensuring clean VM
traffic.</dd>
+ </dl>
+
+ <h2>Virtual packages</h2>
+
+ <p>
+ The virtual packages provide convenient targets for application dependencies to
+ pull in functionality related to specific hypervisors. Since the packaging of
+ the <code>libvirt-daemon</code> RPM is expected to change in the future
to split
+ each hypervisor driver out into a separate RPM, applications are strongly
+ recommended to depend on one of the following virtual packages, instead of
+ depending directly on <code>libvirt-daemon</code>
+ </p>
+
+ <dl>
+ <dt>libvirt</dt>
+ <dd>This package, simply pulls in every single other server side RPM.
+ If an application wants to ensure all possible libvirt drivers are installed,
+ this is what they should depend on</dd>
+
+ <dt>libvirt-daemon-qemu</dt>
+ <dd>This package pulls in the server side daemon, drivers and the QEMU TCG
binaries
+ required to provide emulation of non-native architectures</dd>
+ <dt>libvirt-daemon-kvm</dt>
+ <dd>This package pulls in the server side daemon, drivers and the KVM
binaries
+ required to provide hardware accelerated virtualization of the native
+ architectures</dd>
+ <dt>libvirt-daemon-lxc</dt>
+ <dd>This package pulls in the server side daemon and drivers required to
+ run native Linux containers</dd>
+ <dt>libvirt-daemon-uml</dt>
+ <dd>This package pulls in the server side daemon and drivers required to
+ run User Mode Linux. The application must still provide the actual
+ UML binary kenrels</dd>
+ <dt>libvirt-daemon-xen</dt>
+ <dd>This package pulls in the server side daemon and drivers required to
+ run guests on the Xen hypervisor.</dd>
+
+ <dt>libvirt-qemu</dt>
+ <dd>This package pulls in the server side daemon, drivers and the QEMU TCG
binaries
+ required to provide emulation of non-native architectures</dd>
+ <dt>libvirt-kvm</dt>
+ <dd>This package pulls in the server side daemon, drivers and the KVM
binaries
+ required to provide hardware accelerated virtualization of the native
+ architectures</dd>
+ <dt>libvirt-lxc</dt>
+ <dd>This package pulls in the server side daemon, drivers and default
+ configuration files required to run native Linux containers</dd>
+ <dt>libvirt-uml</dt>
+ <dd>This package pulls in the server side daemon, drivers and default
+ configuration files required to run User Mode Linux. The application
+ must still provide the actual UML binary kenrels</dd>
+ <dt>libvirt-xen</dt>
+ <dd>This package pulls in the server side daemon, drivers and default
+ configuration files required to run guests on the Xen hypervisor.</dd>
+ </dl>
+
+ </body>
+</html>
diff --git a/docs/sitemap.html.in b/docs/sitemap.html.in
index 1de2b20..620c989 100644
--- a/docs/sitemap.html.in
+++ b/docs/sitemap.html.in
@@ -84,6 +84,10 @@
<a href="hooks.html">Hooks</a>
<span>Hooks for system specific management</span>
</li>
+ <li>
+ <a href="packaging.html">Distribution
packaging</a>
+ <span>Rationale for distribution RPM packaging</span>
+ </li>
</ul>
</li>
<li>
diff --git a/libvirt.spec.in b/libvirt.spec.in
index 67f1c33..743d43e 100644
--- a/libvirt.spec.in
+++ b/libvirt.spec.in
@@ -52,6 +52,14 @@
%define with_libxl 0%{!?_without_libxl:%{server_drivers}}
%define with_vmware 0%{!?_without_vmware:%{server_drivers}}
+%define with_qemu_tcg %{with_qemu}
+# Change if we ever provide qemu-kvm binaries on non-x86 hosts
+%ifarch %{ix86} x86_64
+%define with_qemu_kvm %{with_qemu}
+%else
+%define with_qemu_kvm 0
+%endif
+
# Then the hypervisor drivers that talk via a native remote protocol
%define with_phyp 0%{!?_without_phyp:1}
%define with_esx 0%{!?_without_esx:1}
@@ -125,8 +133,10 @@
# RHEL-5 has restricted QEMU to x86_64 only and is too old for LXC
%if 0%{?rhel} == 5
+%define with_qemu_tcg 0
%ifnarch x86_64
%define with_qemu 0
+%define with_qemu_kvm 0
%endif
%define with_lxc 0
%endif
@@ -134,8 +144,10 @@
# RHEL-6 has restricted QEMU to x86_64 only, stopped including Xen
# on all archs. Other archs all have LXC available though
%if 0%{?rhel} >= 6
+%define with_qemu_tcg 0
%ifnarch x86_64
%define with_qemu 0
+%define with_qemu_kvm 0
%endif
%define with_xen 0
%endif
@@ -268,109 +280,17 @@ Source: http://libvirt.org/sources/libvirt-%{version}.tar.gz
BuildRoot: %{_tmppath}/%{name}-%{version}-%{release}-root
URL: http://libvirt.org/
-# All runtime requirements for the libvirt package (runtime requrements
-# for subpackages are listed later in those subpackages)
-
-# The client side, i.e. shared libs and virsh are in a subpackage
-Requires: %{name}-client = %{version}-%{release}
-
-# Used by many of the drivers, so turn it on whenever the
-# daemon is present
%if %{with_libvirtd}
-# for modprobe of pci devices
-Requires: module-init-tools
-# for /sbin/ip & /sbin/tc
-Requires: iproute
-%if %{with_avahi}
-Requires: avahi-libs
-%endif
-%endif
-%if %{with_network}
-Requires: dnsmasq >= 2.41
-Requires: radvd
-%endif
-%if %{with_network} || %{with_nwfilter}
-Requires: iptables
-Requires: iptables-ipv6
-%endif
-%if %{with_nwfilter}
-Requires: ebtables
-%endif
-# needed for device enumeration
-%if %{with_hal}
-Requires: hal
-%endif
-%if %{with_udev}
-Requires: udev >= 145
-%endif
-%if %{with_polkit}
-%if 0%{?fedora} >= 12 || 0%{?rhel} >=6
-Requires: polkit >= 0.93
-%else
-Requires: PolicyKit >= 0.6
-%endif
-%endif
-%if %{with_storage_fs}
-Requires: nfs-utils
-# For mkfs
-Requires: util-linux-ng
-# For pool-build probing for existing pools
-BuildRequires: libblkid-devel >= 2.17
-# For glusterfs
-%if 0%{?fedora} >= 11
-Requires: glusterfs-client >= 2.0.1
-%endif
-%endif
-%if %{with_qemu}
-# From QEMU RPMs
-Requires: /usr/bin/qemu-img
-# For image compression
-Requires: gzip
-Requires: bzip2
-Requires: lzop
-Requires: xz
-%else
-%if %{with_xen}
-# From Xen RPMs
-Requires: /usr/sbin/qcow-create
-%endif
-%endif
-%if %{with_storage_lvm}
-# For LVM drivers
-Requires: lvm2
-%endif
-%if %{with_storage_iscsi}
-# For ISCSI driver
-Requires: iscsi-initiator-utils
-%endif
-%if %{with_storage_disk}
-# For disk driver
-Requires: parted
-Requires: device-mapper
-%endif
-%if %{with_storage_mpath}
-# For multipath support
-Requires: device-mapper
-%endif
-%if %{with_cgconfig}
-Requires: libcgroup
-%endif
-%ifarch %{ix86} x86_64 ia64
-# For virConnectGetSysinfo
-Requires: dmidecode
-%endif
-# For service management
-%if %{with_systemd}
-Requires(post): systemd-units
-Requires(post): systemd-sysv
-Requires(preun): systemd-units
-Requires(postun): systemd-units
-%endif
-%if %{with_numad}
-Requires: numad
+Requires: libvirt-daemon = %{version}-%{release}
+Requires: libvirt-daemon-configs = %{version}-%{release}
+# XXX when we turn on driver modules, we need to add
+# deps on each driver (Requires: libvirt-daemon-drv-qemu)
%endif
+Requires: libvirt-docs = %{version}-%{release}
+Requires: libvirt-client = %{version}-%{release}
-# All build-time requirements
+# All build-time requirements. Run-time requirements are
+# listed against each sub-RPM
%if 0%{?enable_autotools}
BuildRequires: autoconf
BuildRequires: automake
@@ -537,6 +457,271 @@ Libvirt is a C toolkit to interact with the virtualization
capabilities
of recent versions of Linux (and other OSes). The main package includes
the libvirtd server exporting the virtualization support.
+%if %{with_libvirtd}
+%package daemon
+Summary: Server side daemon and supporting files for libvirt library
+Group: Development/Libraries
+
+# All runtime requirements for the libvirt package (runtime requrements
+# for subpackages are listed later in those subpackages)
+
+# The client side, i.e. shared libs and virsh are in a subpackage
+Requires: %{name}-client = %{version}-%{release}
+
+# Used by many of the drivers, so turn it on whenever the
+# daemon is present
+%if %{with_libvirtd}
+# for modprobe of pci devices
+Requires: module-init-tools
+# for /sbin/ip & /sbin/tc
+Requires: iproute
+%if %{with_avahi}
+Requires: avahi-libs
+%endif
+%endif
+%if %{with_network}
+Requires: dnsmasq >= 2.41
+Requires: radvd
+%endif
+%if %{with_network} || %{with_nwfilter}
+Requires: iptables
+Requires: iptables-ipv6
+%endif
+%if %{with_nwfilter}
+Requires: ebtables
+%endif
+# needed for device enumeration
+%if %{with_hal}
+Requires: hal
+%endif
+%if %{with_udev}
+Requires: udev >= 145
+%endif
+%if %{with_polkit}
+%if 0%{?fedora} >= 12 || 0%{?rhel} >=6
+Requires: polkit >= 0.93
+%else
+Requires: PolicyKit >= 0.6
+%endif
+%endif
+%if %{with_storage_fs}
+Requires: nfs-utils
+# For mkfs
+Requires: util-linux-ng
+# For pool-build probing for existing pools
+BuildRequires: libblkid-devel >= 2.17
+# For glusterfs
+%if 0%{?fedora} >= 11
+Requires: glusterfs-client >= 2.0.1
+%endif
+%endif
+%if %{with_qemu}
+# From QEMU RPMs
+Requires: /usr/bin/qemu-img
+# For image compression
+Requires: gzip
+Requires: bzip2
+Requires: lzop
+Requires: xz
+%else
+%if %{with_xen}
+# From Xen RPMs
+Requires: /usr/sbin/qcow-create
+%endif
+%endif
+%if %{with_storage_lvm}
+# For LVM drivers
+Requires: lvm2
+%endif
+%if %{with_storage_iscsi}
+# For ISCSI driver
+Requires: iscsi-initiator-utils
+%endif
+%if %{with_storage_disk}
+# For disk driver
+Requires: parted
+Requires: device-mapper
+%endif
+%if %{with_storage_mpath}
+# For multipath support
+Requires: device-mapper
+%endif
+%if %{with_cgconfig}
+Requires: libcgroup
+%endif
+%ifarch %{ix86} x86_64 ia64
+# For virConnectGetSysinfo
+Requires: dmidecode
+%endif
+# For service management
+%if %{with_systemd}
+Requires(post): systemd-units
+Requires(post): systemd-sysv
+Requires(preun): systemd-units
+Requires(postun): systemd-units
+%endif
+%if %{with_numad}
+Requires: numad
+%endif
+
+%package docs
+Summary: Documentation for libvirt library and daemon
+Group: Development/Libraries
+
+%description docs
+Copy of the libvirt website documentation
+
+%description daemon
+Server side daemon required to manage the virtualization capabilities
+of recent versions of Linux. Requires a hypervisor specific sub-RPM
+for specific drivers.
+
+%package daemon-configs
+Summary: Default configuration files for the libvirtd daemon
+Group: Development/Libraries
+
+Requires: libvirt-daemon = %{version}-%{release}
+
+%description daemon-configs
+Default configuration files for setting up NAT based networking
+and guest network traffic filtering.
+%endif
+
+# XXX when we turn on driver modules, we will need to
+# create daemon-drv-XXX sub-RPMs and add them as deps
+# to all of the following daemon-XXX RPMs
+
+%if %{with_qemu_tcg}
+%package daemon-qemu
+Summary: Server side daemon & driver required to run QEMU guests
+Group: Development/Libraries
+
+Requires: libvirt-daemon = %{version}-%{release}
+Requires: qemu
+%endif
+
+%if %{with_qemu_kvm}
+%package daemon-kvm
+Summary: Server side daemon & driver required to run QEMU guests
+Group: Development/Libraries
+
+Requires: libvirt-daemon = %{version}-%{release}
+Requires: qemu-kvm
+%endif
+
+%if %{with_qemu_tcg}
+%description daemon-qemu
+Server side daemon and driver required to manage the virtualization
+capabilities of the QEMU TCG emulators
+%endif
+
+%if %{with_qemu_kvm}
+%description daemon-kvm
+Server side daemon and driver required to manage the virtualization
+capabilities of the QEMU KVM hypervisor
+%endif
+
+%if %{with_qemu_tcg}
+%package qemu
+Summary: Server side daemon, driver & default configs required to run QEMU guests
+Group: Development/Libraries
+
+Requires: libvirt-daemon-qemu = %{version}-%{release}
+Requires: libvirt-configs = %{version}-%{release}
+
+%description qemu
+Server side daemon, driver and default network & firewall configs
+required to manage the virtualization capabilities of QEMU.
+%endif
+
+%if %{with_qemu_kvm}
+%package kvm
+Summary: Server side daemon, driver & default configs required to run KVM guests
+Group: Development/Libraries
+
+Requires: libvirt-daemon-kvm = %{version}-%{release}
+Requires: libvirt-configs = %{version}-%{release}
+
+%description kvm
+Server side daemon, driver and default network & firewall configs
+required to manage the virtualization capabilities of KVM.
+%endif
+
+
+%if %{with_lxc}
+%package daemon-lxc
+Summary: Server side daemon & driver required to run LXC guests
+Group: Development/Libraries
+
+Requires: libvirt-daemon = %{version}-%{release}
+Requires: lxc
+
+%description daemon-lxc
+Server side daemon and driver required to manage the virtualization
+capabilities of LXC
+
+%package lxc
+Summary: Server side daemon, driver & default configs required to run LXC guests
+Group: Development/Libraries
+
+Requires: libvirt-daemon-lxc = %{version}-%{release}
+Requires: libvirt-configs = %{version}-%{release}
+
+%description lxc
+Server side daemon, driver and default network & firewall configs
+required to manage the virtualization capabilities of LXC.
+%endif
+
+
+%if %{with_uml}
+%package daemon-uml
+Summary: Server side daemon & driver required to run UML guests
+Group: Development/Libraries
+
+Requires: libvirt-daemon = %{version}-%{release}
+# There are no UML kernel RPMs in Fedora/RHEL to depend on.
+
+%description daemon-uml
+Server side daemon and driver required to manage the virtualization
+capabilities of UML
+
+%package uml
+Summary: Server side daemon, driver & default configs required to run UML guests
+Group: Development/Libraries
+
+Requires: libvirt-daemon-uml = %{version}-%{release}
+Requires: libvirt-configs = %{version}-%{release}
+
+%description uml
+Server side daemon, driver and default network & firewall configs
+required to manage the virtualization capabilities of UML.
+%endif
+
+
+%if %{with_xen}
+%package daemon-xen
+Summary: Server side daemon & driver required to run XEN guests
+Group: Development/Libraries
+
+Requires: libvirt-daemon = %{version}-%{release}
+Requires: xen
+
+%description daemon-xen
+Server side daemon and driver required to manage the virtualization
+capabilities of XEN
+
+%package xen
+Summary: Server side daemon, driver & default configs required to run XEN guests
+Group: Development/Libraries
+
+Requires: libvirt-daemon-xen = %{version}-%{release}
+Requires: libvirt-configs = %{version}-%{release}
+
+%description xen
+Server side daemon, driver and default network & firewall configs
+required to manage the virtualization capabilities of Xen.
+%endif
+
%package client
Summary: Client side library and utilities of the libvirt library
Group: Development/Libraries
@@ -582,7 +767,7 @@ Group: Development/Libraries
Requires: sanlock >= 1.8
#for virt-sanlock-cleanup require augeas
Requires: augeas
-Requires: %{name} = %{version}-%{release}
+Requires: %{name}-daemon = %{version}-%{release}
%description lock-sanlock
Includes the Sanlock lock manager plugin for the QEMU
@@ -811,8 +996,7 @@ autoreconf -if
%{with_packager_version} \
--with-qemu-user=%{qemu_user} \
--with-qemu-group=%{qemu_group} \
- %{init_scripts} \
- --with-remote-pid-file=%{_localstatedir}/run/libvirtd.pid
+ %{init_scripts}
make %{?_smp_mflags}
gzip -9 ChangeLog
@@ -884,6 +1068,8 @@ rm -rf $RPM_BUILD_ROOT%{_sysconfdir}/logrotate.d/libvirtd.lxc
rm -rf $RPM_BUILD_ROOT%{_sysconfdir}/logrotate.d/libvirtd.uml
%endif
+mv $RPM_BUILD_ROOT%{_datadir}/doc/libvirt-%{version}
$RPM_BUILD_ROOT%{_datadir}/doc/libvirt-docs-%{version}
+
%clean
rm -fr %{buildroot}
@@ -898,7 +1084,8 @@ do
done
make check
-%pre
+%if %{with_libvirtd}
+%pre daemon
%if 0%{?fedora} >= 12 || 0%{?rhel} >= 6
# Normally 'setup' adds this in /etc/passwd, but this is
# here for case of upgrades from earlier Fedora/RHEL. This
@@ -910,22 +1097,9 @@ getent passwd qemu >/dev/null || \
-c "qemu user" qemu
%endif
-%post
+%post daemon
-%if %{with_libvirtd}
%if %{with_network}
-# We want to install the default network for initial RPM installs
-# or on the first upgrade from a non-network aware libvirt only.
-# We check this by looking to see if the daemon is already installed
-if ! /sbin/chkconfig libvirtd && test ! -f
%{_sysconfdir}/libvirt/qemu/networks/default.xml
-then
- UUID=`/usr/bin/uuidgen`
- sed -e "s,</name>,</name>\n <uuid>$UUID</uuid>,"
\
- < %{_datadir}/libvirt/networks/default.xml \
- > %{_sysconfdir}/libvirt/qemu/networks/default.xml
- ln -s ../default.xml %{_sysconfdir}/libvirt/qemu/networks/autostart/default.xml
-fi
-
# All newly defined networks will have a mac address for the bridge
# auto-generated, but networks already existing at the time of upgrade
# will not. We need to go through all the network configs, look for
@@ -991,8 +1165,8 @@ fi
%endif
%endif
-%preun
%if %{with_libvirtd}
+%preun daemon
%if %{with_systemd}
if [ $1 -eq 0 ] ; then
# Package removal, not upgrade
@@ -1007,8 +1181,8 @@ fi
%endif
%endif
-%postun
%if %{with_libvirtd}
+%postun daemon
%if %{with_systemd}
/bin/systemctl daemon-reload >/dev/null 2>&1 || :
if [ $1 -ge 1 ] ; then
@@ -1019,6 +1193,20 @@ fi
%endif
%if %{with_libvirtd}
+%if %{with_network}
+%post daemon-configs
+if [ $1 -eq 1 && test ! -f %{_sysconfdir}/libvirt/qemu/networks/default.xml ] ;
then
+ UUID=`/usr/bin/uuidgen`
+ sed -e "s,</name>,</name>\n <uuid>$UUID</uuid>,"
\
+ < %{_datadir}/libvirt/networks/default.xml \
+ > %{_sysconfdir}/libvirt/qemu/networks/default.xml
+ ln -s ../default.xml %{_sysconfdir}/libvirt/qemu/networks/autostart/default.xml
+fi
+%endif
+%endif
+
+
+%if %{with_libvirtd}
%if %{with_systemd}
%triggerun -- libvirt < 0.9.4
%{_bindir}/systemd-sysv-convert --save libvirtd >/dev/null 2>&1 ||:
@@ -1064,10 +1252,19 @@ fi
/bin/systemctl try-restart libvirt-guests.service >/dev/null 2>&1 || :
%endif
-%if %{with_libvirtd}
%files
%defattr(-, root, root)
+%files docs
+%defattr(-, root, root)
+%dir %{_datadir}/doc/libvirt-docs-%{version}
+%dir %{_datadir}/doc/libvirt-docs-%{version}/html
+%{_datadir}/doc/libvirt-docs-%{version}/html/*
+
+%if %{with_libvirtd}
+%files daemon
+%defattr(-, root, root)
+
%doc AUTHORS ChangeLog.gz NEWS README COPYING.LIB TODO
%dir %attr(0700, root, root) %{_sysconfdir}/libvirt/
@@ -1078,7 +1275,6 @@ fi
%endif
%dir %attr(0700, root, root) %{_sysconfdir}/libvirt/nwfilter/
-%{_sysconfdir}/libvirt/nwfilter/*.xml
%{_sysconfdir}/rc.d/init.d/libvirtd
%if %{with_systemd}
@@ -1190,8 +1386,42 @@ rm -f $RPM_BUILD_ROOT%{_sysconfdir}/sysctl.d/libvirtd
%{_mandir}/man8/libvirtd.8*
%doc docs/*.xml
+
+%files daemon-configs
+%defattr(-, root, root)
+%{_sysconfdir}/libvirt/nwfilter/*.xml
%endif
+%files daemon-qemu
+%defattr(-, root, root)
+
+%files daemon-kvm
+%defattr(-, root, root)
+
+%files daemon-lxc
+%defattr(-, root, root)
+
+%files daemon-uml
+%defattr(-, root, root)
+
+%files daemon-xen
+%defattr(-, root, root)
+
+%files qemu
+%defattr(-, root, root)
+
+%files kvm
+%defattr(-, root, root)
+
+%files lxc
+%defattr(-, root, root)
+
+%files uml
+%defattr(-, root, root)
+
+%files xen
+%defattr(-, root, root)
+
%if %{with_sanlock}
%files lock-sanlock
%defattr(-, root, root)
--
1.7.7.6