7:28 a.m.
From: Hyman Huang(黄勇) <huangy81(a)chinatelecom.cn>
v6:
- rebase on mastr
- drop the commit [PATCH v5 1/9] in this patchset, post an extra
commit if needed in the future.
Please review, thanks !
Regards
Yong
v5:
- [PATCH v5 9/9]: Fix alignment error in qemuDomainGetStatsDirtyRate.
v4:
- Rebase the master
- [PATCH v4 1/9]: Refactor dirty page rate calculation status
implementation, display calc_status as string when
'virsh domstats --dirtyrate' api return.
- [PATCH v4 3/9]: Adjust the 'cap check' block before BeginJob().
- [PATCH v4 5/9]: Drop the virDomainDirtyRateCalcMode and introduce
internal enum qemuMonitorDirtyRateCalcMode instead.
- [PATCH v4 6/9]: Code clean.
- [PATCH v4 7/9]: Split qemu_driver logic of domdirtyrate-calc virsh
api into a separate commit.
- [PATCH v4 8/9]: Change the 'mode' parameter usage as --mode=[xxx|yyy],
code clean in qemuDomainStartDirtyRateCalc.
- [PATCH v4 9/9]: Display calc_mode as string and do code clean in
qemuMonitorJSONExtractDirtyRateInfo.
Thanks Michal and Peter for reviewing the previous versions, please review.
Regards
Yong
v3:
- Rebase the master
- [PATCH v2 2/6]: Fix the usage of virQEMUCapsGet
- [PATCH v2 4/6]: Fix the cleanup missed in qemuDomainStartDirtyRateCalc
- [PATCH v2 4/6]: Move all blocks below ACL check
- [PATCH v2 4/6]: Make the qemuMonitorJSONStartDirtyRateCalc cleaner by
merging the different case of qemuMonitorJSONMakeCommand
- [PATCH v2 4/6]: Code clean, make the error message not be line-broken
- [PATCH v2 5/6]: Abstract the enum definition into a standalone commit
- [PATCH v2 5/6]: Move the validations code above calculating flags block
- [PATCH v2 6/6]: Change the type of 'value' field to unsigned in
struct qemuMonitorDirtyRateVcpu
- [PATCH v2 6/6]: Rename the enum type qemuMonitorDirtyRateCalcMode to
virDomainDirtyRateCalcMode
- [PATCH v2 6/6]: Code clean, align the code in qemuDomainGetStatsDirtyRate
Thanks Peter for quick and precise response, please review.
Regards
Yong
v2:
Rebase master and fix confilicts with commit
"Introduce QEMU_CAPS_DEVICE_VIRTIO_MEM_PCI_PREALLOC"
Thanks !
v1:
This patchset introduce mode option as the supplement of
qemuDomainStartDirtyRateCalc api, add calc_mode for dirtyrate
statistics correspondingly.
Qemu add mode parameter for calc-dirty-rate command since >= 6.2.0,
either of these three mode "page-sampling, dirty-bitmap, dirty-ring"
can be specified when calculating dirty page rate.
Page sampling is the original mode and used as default mode.
Dirty bitmap mode use kvm log sync api to fetch the dirty-bitmap
and count the increased 1 bits number during measurement, thus,
calculate the dirty page rate.
Dirty ring mode use the dirty-ring mechanism implemented in Qemu
which can count the increased dirty page on virtual cpu granularity,
thus, calculate the per-vcpu dirty page rate.
These three calculation mode can be used in different scenarios, and
the dirty-bitmap, dirty-ring mode may be more accurate to a certain
degree. So maybe it's time to support the mode option for dirtyrate
calculation.
This series make main modifications as the following:
1. introduce QEMU_CAPS_CALC_DIRTY_RATE capability to probe
calc-dirty-rate command in case of failure since it just
introduced since >= 5.2.0
2. introduce QEMU_CAPS_DIRTYRATE_MODE capability to probe
mode option of calc-dirty-rate command in case of failure, same
as 1.
3. implement mode option support for dirtyrate calculation.
Please review, thanks !
Best Regards !
Hyman Huang(黄勇) (8):
qemu_capabilities: Introduce QEMU_CAPS_CALC_DIRTY_RATE capability
qemu_driver: Probe capability before calculating dirty page rate
qemu_capabilities: Introduce QEMU_CAPS_DIRTYRATE_MODE capability
include: Introduce virDomainDirtyRateCalcFlags
qemu_driver: Add mode parameter to qemuDomainStartDirtyRateCalc
qemu_driver: Extend flags parameter of virDomainStartDirtyRateCalc
virsh: Add mode option to domdirtyrate-calc virsh api
qemu_driver: Add calc_mode for dirtyrate statistics
docs/manpages/virsh.rst | 7 ++-
include/libvirt/libvirt-domain.h | 13 +++++
src/libvirt-domain.c | 18 +++++-
src/qemu/qemu_capabilities.c | 4 ++
src/qemu/qemu_capabilities.h | 2 +
src/qemu/qemu_driver.c | 56 ++++++++++++++++--
src/qemu/qemu_monitor.c | 5 +-
src/qemu/qemu_monitor.h | 27 ++++++++-
src/qemu/qemu_monitor_json.c | 69 ++++++++++++++++++++++-
src/qemu/qemu_monitor_json.h | 3 +-
tests/qemucapabilitiesdata/caps_5.2.0.aarch64.xml | 1 +
tests/qemucapabilitiesdata/caps_5.2.0.ppc64.xml | 1 +
tests/qemucapabilitiesdata/caps_5.2.0.riscv64.xml | 1 +
tests/qemucapabilitiesdata/caps_5.2.0.s390x.xml | 1 +
tests/qemucapabilitiesdata/caps_5.2.0.x86_64.xml | 1 +
tests/qemucapabilitiesdata/caps_6.0.0.aarch64.xml | 1 +
tests/qemucapabilitiesdata/caps_6.0.0.s390x.xml | 1 +
tests/qemucapabilitiesdata/caps_6.0.0.x86_64.xml | 1 +
tests/qemucapabilitiesdata/caps_6.1.0.x86_64.xml | 1 +
tests/qemucapabilitiesdata/caps_6.2.0.aarch64.xml | 1 +
tests/qemucapabilitiesdata/caps_6.2.0.ppc64.xml | 2 +
tests/qemucapabilitiesdata/caps_6.2.0.x86_64.xml | 2 +
tests/qemucapabilitiesdata/caps_7.0.0.ppc64.xml | 2 +
tests/qemucapabilitiesdata/caps_7.0.0.x86_64.xml | 2 +
tools/virsh-completer-domain.c | 17 ++++++
tools/virsh-completer-domain.h | 4 ++
tools/virsh-domain.c | 42 +++++++++++++-
tools/virsh-domain.h | 9 +++
28 files changed, 278 insertions(+), 16 deletions(-)
--
1.8.3.1