4:08 p.m.
Compiled libvirt and friends from todays sources on ubuntu 9.10. Was playing around with
vt-d and while my MB works fine with ESXi 4, I got some permission issues when I tried the
KVM and virt-manager included from ubuntu so I just gambled and compiled everything from
latest sources.
Things seems to work fine in a normal use case, but if I a PCI device such as a storage
controller, libvirtd will get a sigsev.
I got the onboard Intel Sata, a PCI Sil Sata card as well as an Areca Raid controller in
this machine. I have not tried the Intel Sata device as I am booting from that, but both
the other devices causes sigsev.
I am sure assigned an intel network card a bit earlier and it actually worked (well, the
VM started to boot at least and entered win7 installation without libvirtd crashing), but
when I tested that again now, seems like the ethernet card causes the same problem.
It is 6AM so will not do a serious attempt at debugging this, just wanted to check if
anyone had an idea before I spent more time potentially debugging stuff that is know to
not work.
From dmesg:
[ 986.341633] device vnet0 entered promiscuous mode
[ 986.342897] virbr0: topology change detected, propagating
[ 986.342902] virbr0: port 1(vnet0) entering forwarding state
[ 986.380733] pci-stub 0000:09:01.0: enabling device (0000 -> 0003)
[ 986.380786] pci-stub 0000:09:01.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 986.422128] pci-stub 0000:09:01.0: restoring config space at offset 0x9 (was 0x0,
writing 0xe3c04000)
[ 986.422141] pci-stub 0000:09:01.0: restoring config space at offset 0x8 (was 0x1,
writing 0x1041)
[ 986.422152] pci-stub 0000:09:01.0: restoring config space at offset 0x7 (was 0x1,
writing 0x1061)
[ 986.422163] pci-stub 0000:09:01.0: restoring config space at offset 0x6 (was 0x1,
writing 0x1051)
[ 986.422174] pci-stub 0000:09:01.0: restoring config space at offset 0x5 (was 0x1,
writing 0x1065)
[ 986.422185] pci-stub 0000:09:01.0: restoring config space at offset 0x4 (was 0x1,
writing 0x1059)
[ 986.422199] pci-stub 0000:09:01.0: restoring config space at offset 0x1 (was 0x2b00000,
writing 0x2b00003)
[ 987.172975] assign device: host bdf = 9:1:0
[ 987.173054] deassign device: host bdf = 9:1:0
[ 987.206121] pci-stub 0000:09:01.0: restoring config space at offset 0x9 (was 0x0,
writing 0xe3c04000)
[ 987.206134] pci-stub 0000:09:01.0: restoring config space at offset 0x8 (was 0x1,
writing 0x1041)
[ 987.206146] pci-stub 0000:09:01.0: restoring config space at offset 0x7 (was 0x1,
writing 0x1061)
[ 987.206157] pci-stub 0000:09:01.0: restoring config space at offset 0x6 (was 0x1,
writing 0x1051)
[ 987.206167] pci-stub 0000:09:01.0: restoring config space at offset 0x5 (was 0x1,
writing 0x1065)
[ 987.206178] pci-stub 0000:09:01.0: restoring config space at offset 0x4 (was 0x1,
writing 0x1059)
[ 987.206192] pci-stub 0000:09:01.0: restoring config space at offset 0x1 (was 0x2b00000,
writing 0x2b00003)
[ 987.206225] pci-stub 0000:09:01.0: PCI INT A disabled
[ 987.286791] libvirtd[3193]: segfault at 10 ip 00007f921b4546b4 sp 00007f9216e165e0
error 4 in libpthread-2.10.1.so[7f921b44a000+17000]
From GDB
06:45:32.434: error : qemuMonitorCommandWithHandler:290 : cannot send monitor command
'info cpus': Connection reset by peer
06:45:32.434: error : qemuMonitorTextGetCPUInfo:436 : internal error cannot run monitor
command to fetch CPU thread info
Program received signal SIGSEGV, Segmentation fault.
[Switching to Thread 0x7f485bfff910 (LWP 18120)]
0x00007f48657fb6b4 in pthread_mutex_unlock () from /lib/libpthread.so.0
(gdb) bt
#0 0x00007f48657fb6b4 in pthread_mutex_unlock () from /lib/libpthread.so.0
#1 0x0000000000431101 in qemuDomainObjExitMonitorWithDriver (driver=0x11f0110,
obj=0x12114f0) at qemu/qemu_driver.c:318
#2 0x000000000043f436 in qemudStartVMDaemon (conn=<value optimized out>,
driver=0x11f0110, vm=0x12114f0,
migrateFrom=<value optimized out>, stdin_fd=<value optimized out>) at
qemu/qemu_driver.c:2320
#3 0x00000000004407c4 in qemudDomainStart (dom=0x11f0330) at qemu/qemu_driver.c:4370
#4 0x00007f4865a621e7 in virDomainCreate (domain=0x11f0330) at libvirt.c:4509
#5 0x0000000000420d68 in remoteDispatchDomainCreate (server=<value optimized out>,
client=<value optimized out>, conn=0x1219da0,
hdr=<value optimized out>, rerr=0x7f485bffedf0, args=<value optimized
out>, ret=0x7f485bffeed0) at remote.c:853
#6 0x00000000004228e1 in remoteDispatchClientCall (server=<value optimized out>,
client=0x7f485c000d30, msg=0x7f485c080f00)
at dispatch.c:506
#7 0x0000000000422c93 in remoteDispatchClientRequest (server=0x11e2790,
client=0x7f485c000d30, msg=0x7f485c080f00) at dispatch.c:388
#8 0x000000000041625c in qemudWorker (data=<value optimized out>) at
libvirtd.c:1518
#9 0x00007f48657f7a04 in start_thread () from /lib/libpthread.so.0
#10 0x00007f48655617bd in clone () from /lib/libc.so.6
#11 0x0000000000000000 in ?? ()
(gdb) select 2
(gdb) info locals
argv = 0x0
tmp = <value optimized out>
progenv = 0x0
i = 1
ret = 1
sb = {st_dev = 64512, st_ino = 140307, st_nlink = 1, st_mode = 33261, st_uid = 0, st_gid =
0, __pad0 = 0, st_rdev = 0,
st_size = 2293664, st_blksize = 4096, st_blocks = 4480, st_atim = {tv_sec = 1258937087,
tv_nsec = 967226499}, st_mtim = {
tv_sec = 1257180462, tv_nsec = 0}, st_ctim = {tv_sec = 1258886336, tv_nsec =
104908677}, __unused = {0, 0, 0}}
tapfds = 0x0
ntapfds = 1
qemuCmdFlags = 9436542
keepfd = {fds_bits = {262144, 0 <repeats 15 times>}}
emulator = <value optimized out>
child = 18145
pos = <value optimized out>
ebuf =
"\220v\036\001\000\000\000\000\060|WeH\177\000\000(\000\000\000\060\000\000\000\000\354\377[H\177\000\000@\353\377[H\177\000\000`\351\377[H\177\000\000\377\377\377\377H\177\000\000\233\017\037\001\000\000\000\000\326\063G\000\000\000\000\000@\247~eH\177\000\000\200\307OeH\177\000\000\240\306OeH\177\000\000JST\000\071\000\000\000\300\352\377[H\177\000\000\342\000\000\000\000\000\000\000\342\000\000\000\000\000\000\000\273\340G\000\000\000\000\000\300\352\377[H\177\000\000K\000\000\000\000\000\000\000`\351\377[H\177\000\000@\354\377[H\177\000\000P\352\377[H\177\000\000\001\000\000\000\000\000\000\000\320\352\377[H\177\000\000$\000\000\000\000\000\000\000py\255eH\177\000\000@\354\377[H\177\000\000\060|WeH\177\000\000\001\200\255\373\000\000\000\000\260\351\377[H\177\000\000\220\354\377[H\177\000\000\240\352\377["...
pidfile = 0x0
logfile = 15
hookData = {conn = 0x1219da0, vm = 0x12114f0, driver = 0x11f0110}
__FUNCTION__ = "qemudStartVMDaemon"
__func__ = "qemudStartVMDaemon"
line 318 is
static void qemuDomainObjExitMonitorWithDriver(struct qemud_driver *driver,
virDomainObjPtr obj)
{
qemuDomainObjPrivatePtr priv = obj->privateData;
qemuMonitorUnlock(priv->mon); <---- 318
qemuDriverLock(driver);
virDomainObjLock(obj);
}
Yep, not a very good attempt at debugging, but this is the first time I look at this code
and I am overdue for Zzzzz :)
Regards,
Terje
_________________________________________________________________
Windows Live: Keep your friends up to date with what you do online.
http://www.microsoft.com/middleeast/windows/windowslive/see-it-in-action/...