[PATCH 072/103] qemu: validate: Move disk address validation code

Move the code from 'qemuValidateDomainDeviceDefDiskFrontend' into 'qemuValidateDomainDeviceDefAddressDrive' which is called from 'qemuValidateDomainDeviceDefAddress' so that we have all address validation code together. This also allows us to remove the inline validation inside 'qemuBuildSCSIHostdevDevStr'. Signed-off-by: Peter Krempa <pkrempa(a)redhat.com&gt; --- src/qemu/qemu_command.c | 16 --- src/qemu/qemu_validate.c | 210 +++++++++++++++++++++++---------------- 2 files changed, 124 insertions(+), 102 deletions(-) diff --git a/src/qemu/qemu_command.c b/src/qemu/qemu_command.c index 1fe7121fa1..bdfc84ba2d 100644 --- a/src/qemu/qemu_command.c +++ b/src/qemu/qemu_command.c @@ -5081,22 +5081,6 @@ qemuBuildSCSIHostdevDevStr(const virDomainDef *def, if (model < 0) return NULL; - if (model == VIR_DOMAIN_CONTROLLER_MODEL_SCSI_LSILOGIC) { - if (dev->info->addr.drive.target != 0) { - virReportError(VIR_ERR_CONFIG_UNSUPPORTED, "%s", - _("target must be 0 for scsi host device " - "if its controller model is 'lsilogic'")); - return NULL; - } - - if (dev->info->addr.drive.unit > 7) { - virReportError(VIR_ERR_CONFIG_UNSUPPORTED, "%s", - _("unit must be not more than 7 for scsi host " - "device if its controller model is 'lsilogic'")); - return NULL; - } - } - virBufferAddLit(&buf, "scsi-generic"); if (!(contAlias = virDomainControllerAliasFind(def, VIR_DOMAIN_CONTROLLER_TYPE_SCSI, diff --git a/src/qemu/qemu_validate.c b/src/qemu/qemu_validate.c index 08f7fb2f42..802393a506 100644 --- a/src/qemu/qemu_validate.c +++ b/src/qemu/qemu_validate.c @@ -1262,7 +1262,117 @@ qemuValidateDomainDeviceDefZPCIAddress(virDomainDeviceInfo *info, static int -qemuValidateDomainDeviceDefAddress(virDomainDeviceInfo *info, +qemuValidateDomainDeviceDefAddressDrive(virDomainDeviceInfo *info, + const virDomainDef *def, + virQEMUCaps *qemuCaps) +{ + virDomainControllerDef *controller = NULL; + + switch ((virDomainDiskBus) info->addr.drive.diskbus) { + case VIR_DOMAIN_DISK_BUS_SCSI: + /* Setting bus= attr for SCSI drives, causes a controller + * to be created. Yes this is slightly odd. It is not possible + * to have > 1 bus on a SCSI controller (yet). */ + if (info->addr.drive.bus != 0) { + virReportError(VIR_ERR_INTERNAL_ERROR, "%s", + _("SCSI controller only supports 1 bus")); + return -1; + } + + /* We allow hotplug/hotunplug disks without a controller, + * hence we don't error out if controller wasn't found. */ + if ((controller = virDomainDeviceFindSCSIController(def, &info->addr.drive))) { + if (controller->model == VIR_DOMAIN_CONTROLLER_MODEL_SCSI_LSILOGIC) { + if (info->addr.drive.target != 0) { + virReportError(VIR_ERR_CONFIG_UNSUPPORTED, "%s", + _("target must be 0 for controller model 'lsilogic'")); + return -1; + } + } else if (!virQEMUCapsGet(qemuCaps, QEMU_CAPS_SCSI_DISK_CHANNEL)) { + if (info->addr.drive.target > 7) { + virReportError(VIR_ERR_CONFIG_UNSUPPORTED, "%s", + _("This QEMU doesn't support target greater than 7")); + return -1; + } + + if (info->addr.drive.bus != 0 && + info->addr.drive.unit != 0) { + virReportError(VIR_ERR_CONFIG_UNSUPPORTED, "%s", + _("This QEMU only supports both bus and unit equal to 0")); + return -1; + } + } + } + break; + + case VIR_DOMAIN_DISK_BUS_IDE: + /* We can only have 1 IDE controller (currently) */ + if (info->addr.drive.controller != 0) { + virReportError(VIR_ERR_INTERNAL_ERROR, "%s", + _("Only 1 IDE controller is supported")); + return -1; + } + + if (info->addr.drive.target != 0) { + virReportError(VIR_ERR_CONFIG_UNSUPPORTED, "%s", + _("target must be 0 for ide controller")); + return -1; + } + break; + + case VIR_DOMAIN_DISK_BUS_FDC: + /* We can only have 1 FDC controller (currently) */ + if (info->addr.drive.controller != 0) { + virReportError(VIR_ERR_INTERNAL_ERROR, "%s", + _("Only 1 fdc controller is supported")); + return -1; + } + + /* We can only have 1 FDC bus (currently) */ + if (info->addr.drive.bus != 0) { + virReportError(VIR_ERR_INTERNAL_ERROR, "%s", + _("Only 1 fdc bus is supported")); + return -1; + } + + if (info->addr.drive.target != 0) { + virReportError(VIR_ERR_CONFIG_UNSUPPORTED, "%s", + _("target must be 0 for controller fdc")); + return -1; + } + break; + + case VIR_DOMAIN_DISK_BUS_SATA: + if (info->addr.drive.bus != 0) { + virReportError(VIR_ERR_CONFIG_UNSUPPORTED, "%s", + _("bus must be 0 for sata controller")); + return -1; + } + + if (info->addr.drive.target != 0) { + virReportError(VIR_ERR_CONFIG_UNSUPPORTED, "%s", + _("target must be 0 for sata controller")); + return -1; + } + break; + + case VIR_DOMAIN_DISK_BUS_VIRTIO: + case VIR_DOMAIN_DISK_BUS_USB: + case VIR_DOMAIN_DISK_BUS_XEN: + case VIR_DOMAIN_DISK_BUS_SD: + case VIR_DOMAIN_DISK_BUS_NONE: + case VIR_DOMAIN_DISK_BUS_UML: + case VIR_DOMAIN_DISK_BUS_LAST: + break; + } + + return 0; +} + + +static int +qemuValidateDomainDeviceDefAddress(const virDomainDeviceDef *dev, + virDomainDeviceInfo *info, const virDomainDef *def, virQEMUCaps *qemuCaps) { @@ -1314,6 +1424,18 @@ qemuValidateDomainDeviceDefAddress(virDomainDeviceInfo *info, break; case VIR_DOMAIN_DEVICE_ADDRESS_TYPE_DRIVE: + /* drive address validation needs a disk bus type filled in. We assume + * that it's SCSI if it's not a disk since everything else would be + * a SCSI host device. */ + if (dev->type == VIR_DOMAIN_DEVICE_DISK) + info->addr.drive.diskbus = dev->data.disk->bus; + else + info->addr.drive.diskbus = VIR_DOMAIN_DISK_BUS_SCSI; + + if (qemuValidateDomainDeviceDefAddressDrive(info, def, qemuCaps) < 0) + return -1; + break; + case VIR_DOMAIN_DEVICE_ADDRESS_TYPE_VIRTIO_SERIAL: case VIR_DOMAIN_DEVICE_ADDRESS_TYPE_CCID: case VIR_DOMAIN_DEVICE_ADDRESS_TYPE_USB: @@ -1344,7 +1466,7 @@ qemuValidateDomainDeviceInfo(const virDomainDeviceDef *dev, if (!(info = virDomainDeviceGetInfo(dev))) return 0; - if (qemuValidateDomainDeviceDefAddress(info, def, qemuCaps) < 0) + if (qemuValidateDomainDeviceDefAddress(dev, info, def, qemuCaps) < 0) return -1; if (info->acpiIndex) { @@ -2491,9 +2613,6 @@ qemuValidateDomainDeviceDefDiskFrontend(const virDomainDiskDef *disk, const virDomainDef *def, virQEMUCaps *qemuCaps) { - virDomainDeviceInfo *diskInfo; - int cModel; - if (disk->geometry.cylinders > 0 && disk->geometry.heads > 0 && disk->geometry.sectors > 0) { @@ -2653,53 +2772,11 @@ qemuValidateDomainDeviceDefDiskFrontend(const virDomainDiskDef *disk, switch (disk->bus) { case VIR_DOMAIN_DISK_BUS_SCSI: - diskInfo = (virDomainDeviceInfo *)&disk->info; - cModel = qemuDomainFindSCSIControllerModel(def, diskInfo); - if (disk->info.type != VIR_DOMAIN_DEVICE_ADDRESS_TYPE_DRIVE) { virReportError(VIR_ERR_INTERNAL_ERROR, "%s", _("unexpected address type for scsi disk")); return -1; } - - /* Setting bus= attr for SCSI drives, causes a controller - * to be created. Yes this is slightly odd. It is not possible - * to have > 1 bus on a SCSI controller (yet). */ - if (disk->info.addr.drive.bus != 0) { - virReportError(VIR_ERR_INTERNAL_ERROR, - "%s", _("SCSI controller only supports 1 bus")); - return -1; - } - - /* We allow hotplug/hotunplug disks without a controller, - * hence we don't error out if cModel is < 0. These - * validations were originally made under the assumption of - * a controller being found though. */ - if (cModel > 0) { - if (cModel == VIR_DOMAIN_CONTROLLER_MODEL_SCSI_LSILOGIC) { - if (disk->info.addr.drive.target != 0) { - virReportError(VIR_ERR_CONFIG_UNSUPPORTED, "%s", - _("target must be 0 for controller " - "model 'lsilogic'")); - return -1; - } - } else if (!virQEMUCapsGet(qemuCaps, QEMU_CAPS_SCSI_DISK_CHANNEL)) { - if (disk->info.addr.drive.target > 7) { - virReportError(VIR_ERR_CONFIG_UNSUPPORTED, "%s", - _("This QEMU doesn't support target " - "greater than 7")); - return -1; - } - - if (disk->info.addr.drive.bus != 0 && - disk->info.addr.drive.unit != 0) { - virReportError(VIR_ERR_CONFIG_UNSUPPORTED, "%s", - _("This QEMU only supports both bus and " - "unit equal to 0")); - return -1; - } - } - } break; case VIR_DOMAIN_DISK_BUS_IDE: @@ -2708,17 +2785,6 @@ qemuValidateDomainDeviceDefDiskFrontend(const virDomainDiskDef *disk, _("unexpected address type for ide disk")); return -1; } - /* We can only have 1 IDE controller (currently) */ - if (disk->info.addr.drive.controller != 0) { - virReportError(VIR_ERR_INTERNAL_ERROR, "%s", - _("Only 1 IDE controller is supported")); - return -1; - } - if (disk->info.addr.drive.target != 0) { - virReportError(VIR_ERR_CONFIG_UNSUPPORTED, "%s", - _("target must be 0 for ide controller")); - return -1; - } break; case VIR_DOMAIN_DISK_BUS_FDC: @@ -2727,23 +2793,6 @@ qemuValidateDomainDeviceDefDiskFrontend(const virDomainDiskDef *disk, _("unexpected address type for fdc disk")); return -1; } - /* We can only have 1 FDC controller (currently) */ - if (disk->info.addr.drive.controller != 0) { - virReportError(VIR_ERR_INTERNAL_ERROR, "%s", - _("Only 1 fdc controller is supported")); - return -1; - } - /* We can only have 1 FDC bus (currently) */ - if (disk->info.addr.drive.bus != 0) { - virReportError(VIR_ERR_INTERNAL_ERROR, "%s", - _("Only 1 fdc bus is supported")); - return -1; - } - if (disk->info.addr.drive.target != 0) { - virReportError(VIR_ERR_CONFIG_UNSUPPORTED, "%s", - _("target must be 0 for controller fdc")); - return -1; - } break; case VIR_DOMAIN_DISK_BUS_SATA: @@ -2752,17 +2801,6 @@ qemuValidateDomainDeviceDefDiskFrontend(const virDomainDiskDef *disk, _("unexpected address type for sata disk")); return -1; } - - if (disk->info.addr.drive.bus != 0) { - virReportError(VIR_ERR_CONFIG_UNSUPPORTED, "%s", - _("bus must be 0 for sata controller")); - return -1; - } - if (disk->info.addr.drive.target != 0) { - virReportError(VIR_ERR_CONFIG_UNSUPPORTED, "%s", - _("target must be 0 for sata controller")); - return -1; - } break; case VIR_DOMAIN_DISK_BUS_VIRTIO: -- 2.31.1