1:51 p.m.
Signed-off-by: Peter Krempa <pkrempa(a)redhat.com>
---
src/qemu/libvirtd_qemu.aug | 4 ++++
src/qemu/qemu.conf | 34 ++++++++++++++++++++++++++++++++++
src/qemu/qemu_conf.c | 15 +++++++++++++++
src/qemu/qemu_conf.h | 3 +++
src/qemu/test_libvirtd_qemu.aug.in | 2 ++
5 files changed, 58 insertions(+)
diff --git a/src/qemu/libvirtd_qemu.aug b/src/qemu/libvirtd_qemu.aug
index 2dc16e91fd..679f48cbca 100644
--- a/src/qemu/libvirtd_qemu.aug
+++ b/src/qemu/libvirtd_qemu.aug
@@ -119,6 +119,9 @@ module Libvirtd_qemu =
let vxhs_entry = bool_entry "vxhs_tls"
| str_entry "vxhs_tls_x509_cert_dir"
+ let nbd_entry = bool_entry "nbd_tls"
+ | str_entry "nbd_tls_x509_cert_dir"
+
(* Each entry in the config is one of the following ... *)
let entry = default_tls_entry
| vnc_entry
@@ -138,6 +141,7 @@ module Libvirtd_qemu =
| gluster_debug_level_entry
| memory_entry
| vxhs_entry
+ | nbd_entry
let comment = [ label "#comment" . del /#[ \t]*/ "# " . store
/([^ \t\n][^\n]*)?/ . del /\n/ "\n" ]
let empty = [ label "#empty" . eol ]
diff --git a/src/qemu/qemu.conf b/src/qemu/qemu.conf
index 31738ff19c..c8e1a62d1c 100644
--- a/src/qemu/qemu.conf
+++ b/src/qemu/qemu.conf
@@ -297,6 +297,40 @@
#vxhs_tls_x509_cert_dir = "/etc/pki/libvirt-vxhs"
+
+# Enable use of TLS encryption for all NBD disk devices that don't
+# specifically disable it.
+#
+# When the NBD server is set up appropriately, x509 certificates are required
+# for authentication between the client and the remote NBD server.
+#
+# It is necessary to setup CA and issue the client certificate before
+# enabling this.
+#
+#nbd_tls = 1
+
+
+# In order to override the default TLS certificate location for NBD
+# backed storage, supply a valid path to the certificate directory.
+# This is used to authenticate the NBD block device clients to the NBD
+# server.
+#
+# If the provided path does not exist, libvirtd will fail to start.
+# If the path is not provided, but nbd_tls = 1, then the
+# default_tls_x509_cert_dir path will be used.
+#
+# NBD block device clients expect the client certificate and key to be
+# present in the certificate directory along with the CA certificate.
+# Since this is only a client the server-key.pem certificate is not needed.
+# Thus a NBD directory must contain the following:
+#
+# ca-cert.pem - the CA master certificate
+# client-cert.pem - the client certificate signed with the ca-cert.pem
+# client-key.pem - the client private key
+#
+#nbd_tls_x509_cert_dir = "/etc/pki/libvirt-nbd"
+
+
# In order to override the default TLS certificate location for migration
# certificates, supply a valid path to the certificate directory. If the
# provided path does not exist, libvirtd will fail to start. If the path is
diff --git a/src/qemu/qemu_conf.c b/src/qemu/qemu_conf.c
index 277ab833a8..5f35a49e91 100644
--- a/src/qemu/qemu_conf.c
+++ b/src/qemu/qemu_conf.c
@@ -279,6 +279,7 @@ virQEMUDriverConfigPtr virQEMUDriverConfigNew(bool privileged)
SET_TLS_X509_CERT_DEFAULT(chardev);
SET_TLS_X509_CERT_DEFAULT(migrate);
SET_TLS_X509_CERT_DEFAULT(vxhs);
+ SET_TLS_X509_CERT_DEFAULT(nbd);
#undef SET_TLS_X509_CERT_DEFAULT
@@ -378,6 +379,7 @@ static void virQEMUDriverConfigDispose(void *obj)
VIR_FREE(cfg->chardevTLSx509secretUUID);
VIR_FREE(cfg->vxhsTLSx509certdir);
+ VIR_FREE(cfg->nbdTLSx509certdir);
VIR_FREE(cfg->migrateTLSx509certdir);
VIR_FREE(cfg->migrateTLSx509secretUUID);
@@ -458,6 +460,7 @@ virQEMUDriverConfigTLSDirResetDefaults(virQEMUDriverConfigPtr cfg)
CHECK_RESET_CERT_DIR_DEFAULT(chardev);
CHECK_RESET_CERT_DIR_DEFAULT(migrate);
CHECK_RESET_CERT_DIR_DEFAULT(vxhs);
+ CHECK_RESET_CERT_DIR_DEFAULT(nbd);
return 0;
}
@@ -561,6 +564,10 @@ int virQEMUDriverConfigLoadFile(virQEMUDriverConfigPtr cfg,
goto cleanup;
if (virConfGetValueString(conf, "vxhs_tls_x509_cert_dir",
&cfg->vxhsTLSx509certdir) < 0)
goto cleanup;
+ if (virConfGetValueBool(conf, "nbd_tls", &cfg->nbdTLS) < 0)
+ goto cleanup;
+ if (virConfGetValueString(conf, "nbd_tls_x509_cert_dir",
&cfg->nbdTLSx509certdir) < 0)
+ goto cleanup;
#define GET_CONFIG_TLS_CERTINFO(val) \
do { \
@@ -992,6 +999,14 @@ virQEMUDriverConfigValidate(virQEMUDriverConfigPtr cfg)
return -1;
}
+ if (STRNEQ(cfg->nbdTLSx509certdir, SYSCONFDIR "/pki/qemu") &&
+ !virFileExists(cfg->nbdTLSx509certdir)) {
+ virReportError(VIR_ERR_CONF_SYNTAX,
+ _("nbd_tls_x509_cert_dir directory '%s' does not
exist"),
+ cfg->nbdTLSx509certdir);
+ return -1;
+ }
+
return 0;
}
diff --git a/src/qemu/qemu_conf.h b/src/qemu/qemu_conf.h
index 7a63780c48..6d25c3e74f 100644
--- a/src/qemu/qemu_conf.h
+++ b/src/qemu/qemu_conf.h
@@ -207,6 +207,9 @@ struct _virQEMUDriverConfig {
bool vxhsTLS;
char *vxhsTLSx509certdir;
+
+ bool nbdTLS;
+ char *nbdTLSx509certdir;
};
/* Main driver state */
diff --git a/src/qemu/test_libvirtd_qemu.aug.in b/src/qemu/test_libvirtd_qemu.aug.in
index 95885e9f06..912161c272 100644
--- a/src/qemu/test_libvirtd_qemu.aug.in
+++ b/src/qemu/test_libvirtd_qemu.aug.in
@@ -27,6 +27,8 @@ module Test_libvirtd_qemu =
{ "chardev_tls_x509_secret_uuid" =
"00000000-0000-0000-0000-000000000000" }
{ "vxhs_tls" = "1" }
{ "vxhs_tls_x509_cert_dir" = "/etc/pki/libvirt-vxhs" }
+{ "nbd_tls" = "1" }
+{ "nbd_tls_x509_cert_dir" = "/etc/pki/libvirt-nbd" }
{ "migrate_tls_x509_cert_dir" = "/etc/pki/libvirt-migrate" }
{ "migrate_tls_x509_verify" = "1" }
{ "migrate_tls_x509_secret_uuid" =
"00000000-0000-0000-0000-000000000000" }
--
2.16.2