Re: [libvirt] F11 and KVM Migrations
On 07/09/2009 01:43 AM, Chris Lalancette wrote:
Yeah, that's just not going to work. In theory it might work,
but it's never
been tested, so I'm not surprised it doesn't. In general migration is extremely
finicky when it comes to CPU versions, and versions of the software.
If you are interested in debugging it more, I would suggest stopping libvirtd on
both sides, starting them back up by hand with:
LIBVIRT_DEBUG=1 /usr/sbin/libvirtd --verbose --listen
And then re-running your test. That will dump lots of debugging information on
both machines, and you might be able to get somewhat of a better idea of what is
happening.
Host 1:
[root@vm1 ~]# rpm -q libvirt
libvirt-0.6.2-12.fc11.x86_64
[root@vm1 ~]# uname -r
2.6.29.5-191.fc11.x86_64
Host 2:
[root@vm2 ~]# rpm -q libvirt
libvirt-0.6.2-12.fc11.x86_64
[root@vm2 ~]# uname -r
2.6.29.5-191.fc11.x86_64
Host 2 doesn't want to start with --verbose:
08:16:44.859: debug : virEventInterruptLocked:635 : Skip interrupt, 0 0
08:16:44.859: debug : virEventAddHandleImpl:111 : Add handle 11 13 0x412c70
0x13368a0
08:16:44.859: debug : virEventInterruptLocked:635 : Skip interrupt, 0 0
08:16:44.868: error : Cannot access CA certificate
'/etc/pki/CA/cacert.pem': No such file or directory
What's weird is, if I start the service it works fine. It only errors about
that cacert if I do it raw. I can't find any reference to cacert in my
config. Help!
--
Scott Baker - Canby Telcom
System Administrator - RHCE - 503.266.8253