On Fri, Jun 22, 2018 at 04:25:13PM +0200, Kevin Wolf wrote:
Am 22.06.2018 um 15:36 hat Christian Borntraeger geschrieben:
>
>
> On 06/22/2018 02:55 PM, Kevin Wolf wrote:
> > Am 22.06.2018 um 13:38 hat Christian Borntraeger geschrieben:
> >>
> >> On 06/15/2018 04:21 PM, Kevin Wolf wrote:
> >>> The -drive option serial was deprecated in QEMU 2.10. It's time to
> >>> remove it.
> >>>
> >>> Tests need to be updated to set the serial number with -global instead
> >>> of using the -drive option.
> >>
> >> libvirt 4.5 still creates those (at least on s390x)
> >>
> >> <disk type='file' device='disk'>
> >> <driver name='qemu' type='qcow2'
cache='none' io='native' iothread='1'/>
> >> <source file='/var/lib/libvirt/qemu/image.zhyp137'/>
> >> <target dev='hda' bus='virtio'/>
> >> <serial>skel</serial>
> >> <boot order='1'/>
> >> <address type='ccw' cssid='0xfe'
ssid='0x0' devno='0x0000'/>
> >> </disk>
> >>
> >>
> >> ->
> >> [...]
> >> -drive
file=/var/lib/libvirt/qemu/image.zhyp137,format=qcow2,if=none,id=drive-virtio-disk0,serial=skel,cache=none,aio=native
-device
virtio-blk-ccw,iothread=iothread1,scsi=off,devno=fe.0.0000,drive=drive-virtio-disk0,id=virtio-disk0,bootindex=1,write-cache=on
> >> [...]
> >>
> >> 2018-06-22T11:25:20.946024Z qemu-system-s390x: -drive
file=/var/lib/libvirt/qemu/image.zhyp137,format=qcow2,if=none,id=drive-virtio-disk0,serial=skel,cache=none,aio=native:
Block format 'qcow2' does not support the option 'serial'
> >> 2018-06-22 11:25:21.098+0000: shutting down, reason=failed
> >>
> >> So it seems that this breaks s390x.
>
> To me it seems that this is also broken on x86.
> >
> > Thanks for bringing this up. libvirt should fix this before QEMU 3.0 is
> > released.
>
> I think this is definitely too short notice. We should not break existing
> setups just by insisting that users have to update libvirt when they update
> QEMU. Yes, this might be our policy, but doing so "just because we can"
> is certainly a very bad attitude. I see no fundamental technical reason why
> we should not revert this change.
This was in fact one release longer than our deprecation policy says.
Are we serious about the deprecation policy or aren't we?
I might consider reverting a change if it turned out that this requires
some massive work in libvirt. But I think this one should be rather easy
to fix in libvirt until 3.0 is released.
I've got a patch mostly ready that converts libvirt to setting these things
on the frontend device, however, I've got some queries...
- usb-storage - doesn't appear to support geometry or werror/rerror
Will we loose functionality by stopping use of -drive for werror
Loosing geometry feels relevant too, unless it was already ignored
when set opf -drive ?
- SD card - requires -drive with if=sd, no -device support AFAICT
Will we loose functionality be stopping use of -drive for if=sd, or
is this stuff ignored anyway ?
- ide-cd/scsi-id - doesn't support geometry
Presumably becuase its irrelevant for CDs
Regards,
Daniel
--
|:
https://berrange.com -o-
https://www.flickr.com/photos/dberrange :|
|:
https://libvirt.org -o-
https://fstop138.berrange.com :|
|:
https://entangle-photo.org -o-
https://www.instagram.com/dberrange :|