This is a rewrite of:
https://wiki.libvirt.org/page/Live-merge-an-entire-disk-image-chain-inclu...
Once this commit merges, the above wiki should point to this kbase
document.
Signed-off-by: Kashyap Chamarthy <kchamart(a)redhat.com>
---
docs/kbase/index.rst | 3 +
docs/kbase/merging_disk_image_chains.rst | 197 +++++++++++++++++++++++
2 files changed, 200 insertions(+)
create mode 100644 docs/kbase/merging_disk_image_chains.rst
diff --git a/docs/kbase/index.rst b/docs/kbase/index.rst
index 5ee3b5fce8..8e8d959e92 100644
--- a/docs/kbase/index.rst
+++ b/docs/kbase/index.rst
@@ -15,6 +15,9 @@ Usage
`Live full disk backup <live_full_disk_backup.html>`__
A walkthrough of how to take effective live full disk backups.
+`Merging disk image chains <merging_disk_image_chains.html>`__
+ Ways to reduce or consolidate disk image chains.
+
`Virtio-FS <virtiofs.html>`__
Share a filesystem between the guest and the host
diff --git a/docs/kbase/merging_disk_image_chains.rst
b/docs/kbase/merging_disk_image_chains.rst
new file mode 100644
index 0000000000..07732c4e0d
--- /dev/null
+++ b/docs/kbase/merging_disk_image_chains.rst
@@ -0,0 +1,197 @@
+Merging disk image image chains
+===============================
+
+Context
+-------
+
+Sometimes a `disk image chain
+<https://libvirt.org/kbase/backing_chains.html>`_ can get long and
+cumbersome. For the purpose of illustration, consider this smaller disk
+image chain::
+
+ base.raw <-- a.qcow2 <-- b.qcow2 <-- c.qcow2 (live QEMU)
+
+You may want to reduce the backing chain length, or consolidate *all*
+the disk images in the chain into a single image. But you want to
+accomplish this *without* incurring guest down time. Here's how to go
+about it.
+
+The same principles used in the `live full disk backup
+<https://libvirt.org/kbase/live_full_disk_backup.html>` document are
+used here too.
+
+Reducing the disk image chain length
+------------------------------------
+
+Starting the earlier image chain::
+
+ base.raw <-- a.qcow2 <-- b.qcow2 <-- c.qcow2 (live QEMU)
+
+Reduce the length of the chain by two images, with the resulting chain
+being::
+
+ base.raw <-- c.qcow2 (live QEMU)
+
+Where the ``base.raw`` contains the contents of ``a.qcow2`` and
+``b.qcow2``.
+
+1. Start by listing the current active disk image in use::
+
+ $ virsh domblklist vm1
+ Target Source
+ ------------------------------------------------
+ vda /var/lib/libvirt/images/base.raw
+
+2. Create the image chain by creating three QCOW2 overlays (or "external
+ snapshots") on top of each other, while adding some differentiating
+ content in each image::
+
+ $ virsh snapshot-create-as --domain vm1 snap1 \
+ --diskspec vda,file=/var/lib/libvirt/images/a.qcow2 \
+ --disk-only --no-metadata
+
+ # <Add a file in the guest>
+
+ $ virsh snapshot-create-as --domain vm1 snap2 \
+ --diskspec vda,file=/var/lib/libvirt/images/b.qcow2 \
+ --disk-only --no-metadata
+
+ # <Add another file in the guest>
+
+ $ virsh snapshot-create-as --domain vm1 snap3 \
+ --diskspec vda,file=/var/lib/libvirt/images/c.qcow2 \
+ --disk-only --no-metadata
+
+3. Enumerate the backing file chain (here the ``force-share`` option
+ simply allows ``qemu-img`` to safely query the disk image status
+ while it is active) ::
+
+ $ qemu-img info --force-share --backing-chain /var/lib/libvirt/images/cur.qcow2
+ [...]
+
+4. Again, list the current active disk image in use::
+
+ $ virsh domblklist vm1
+ Target Source
+ ------------------------------------------------
+ vda /var/lib/libvirt/images/c.qcow2
+
+5. Perform the "block-commit" by specify the "base" and
"top" images,
+ i.e. merge the contents of ``b.qcow2`` *and* ``a.qcow2`` into
+ ``base.raw``, *and* ::
+
+ $ virsh blockcommit vm1 vda \
+ --base=/var/lib/libvirt/images/base.raw
+ --top=/var/lib/libvirt/images/b.qcow2
+
+A note on accessing 'base' and 'top' images
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Specifying file paths, as above, make sense when your disks are in the
+local filesystem. However, when using more complicated setups such as
+network block device (NBD) disks, there are no file paths. Hhere is
+where accessing the disk by its index number comes into picture.
+
+As an example, the below is the ``<disk>`` element of the guest XML for
+with the original disk image chain of four images::
+
+ ...
+ <disk type='file' device='disk'>
+ <driver name='qemu' type='qcow2'/>
+ <source file='/var/lib/libvirt/images/c.qcow2' index='4'/>
+ <backingStore type='file' index='3'>
+ <format type='qcow2'/>
+ <source file='/var/lib/libvirt/images/b.qcow2'/>
+ <backingStore type='file' index='2'>
+ <format type='qcow2'/>
+ <source file='/var/lib/libvirt/images/a.qcow2'/>
+ <backingStore type='file' index='1'>
+ <format type='raw'/>
+ <source file='/var/lib/libvirt/images/base.raw'/>
+ <backingStore/>
+ </backingStore>
+ </backingStore>
+ </backingStore>
+ <target dev='vda' bus='virtio'/>
+ <alias name='virtio-disk0'/>
+ <address type='pci' domain='0x0000' bus='0x00'
slot='0x05' function='0x0'/>
+ </disk>
+ ...
+
+And we can merge the images ``a.qcow2`` and ``b.qcow2`` into
+``base.qcow2`` using the index numbers 1 (for ``base.qcow2``) and ::
+
+ $> virsh blockcommit vm1 vda --base='vda[1]' --top='vda[3]'
+
+Note that the shell quoting is necessary here, since unquoted ``[1]``
+would do an unexpected shell "globbing" (i.e. file name expansion) if
+you have a file '1' in the current directory
+
+Accessing the disk images via their index numbers is more useful when
+you're using blockCommit() API programmatically.
+
+
+Consolidating the entire chain into a single image
+--------------------------------------------------
+
+Again, starting the original image chain::
+
+ base.raw <-- a.qcow2 <-- b.qcow2 <-- c.qcow2 (live QEMU)
+
+Reduce the length of the chain by two images, with the resulting chain
+being::
+
+ base.raw (live QEMU)
+
+Where the ``base.raw`` contains the contents of ``a.qcow2``, ``b.qcow2``
+and ``c.qcow2``; *and* the live QEMU is piovoted to point to the
+``base.raw``.
+
+
+1. Use the same procedure discussed earlier to create the disk image
+ chain.
+
+
+2. Now perform the "active block-commit" operation::
+
+ $ virsh blockcommit vm1 vda --verbose --pivot --active
+ Block Commit: [100 %]
+ Successfully pivoted
+
+ Notes:
+
+ - ``--active``: It performs a two-stage operation: first, the contents
+ from top images (``a.qcow2``, ``b.qcow2``, and ``c.qcow2``) are
+ committed into the base image; and in the second stage, the the
+ "block-commit" operation remains awake to synchronize any further
+ changes from top images into base. Here the user can take two
+ actions: cancel the job, or pivot the job, i.e. adjust the base
+ image as the current active image.
+
+ - ``--pivot``: Once data is committed from sn1, sn2 and current into
+ base, it pivots the live QEMU to use base as the active image.
+
+ - ``--verbose``: It shows the progress of block operation.
+
+
+3. Again, check the current active block device in use::
+
+ $ virsh domblklist vm1
+ Target Source
+ ------------------------------------------------
+ vda /var/lib/libvirt/images/base.raw
+
+
+4. Enumerate the backing file chain::
+
+ $ qemu-img info --backing-chain /var/lib/libvirt/images/base.raw
+ [...]
+
+ And the final resulting disk image "chain" will be a single,
+ consolidated disk image::
+
+ [base] (live QEMU)
+
+It is worth bearing in mind that once the above pivot completes, *all*
+three overlay files — ``a.qcow2``, ``b.qcow2``, and ``c.qcow2`` — are no
+longer valid, and can be safely discarded.
--
2.30.2