This series aims to implement nftables as a backend driver for the nwfilter feature. The idea is that it will replace the ebiptables driver and provide an easy way for users to switch from one driver to another. The 1st patch introduces the new nwfilter driver. After which nwfilter allows users to choose it in the 2nd patch. The last patch introduces unit testing of the new nftables driver. - Implemented very basic nwfilter.conf reading, choosing a nwfilter driver based on the name of the drivers (nftables/ebiptables). Defaults to the nftables driver, based on the firewall_backend_priority meson option, following the bridge driver logic. - Implemented nft tracing and counters usable via nwfilter.conf options "enable_trace" and "enable_counters" - Resolves issue https://gitlab.com/libvirt/libvirt/-/issues/603, benchmarks showed that the amount of iifname jumps for each interface in the root chains is the cause for this. Switched the nftables driver towards a vmap (verdict map) so we can have 1 rule that jumps to the correct root input/output chain per interface. Which improves throughput as when the number of interface check and jump rules increases the throughput decreases. The issue describes the interface matching works using the interface name and the majority of the effort is the strncpy, this patch also switches nftables to an interface_index compare instead. However, just using the interface_index is not enough, the amount of oif and iif jump rules causes quite the performance degradation, the vmap instead solves this. - Split rules into separate tables: "libvirt_nwfilter_ethernet" and "libvirt_nwfilter_inet" to preserve existing firewall behavior. - Reworked chain logic for clarity with root -input/-output chains per interface. input in the VM interface is filtered in the -input chain(s), output out of the VM inteface is filtered in the -output chain(s). - Stuck with prerouting and postrouting as hooks for input / output on the _ethernet and _inet table. This makes it easier to merge the tables in the future. Saving management of two tables and decreasing the amount of tables a packet sees. Currently ebtables filtering happens via PREROUTING and POSTROUTING hooks, while ip/ip6tables filtering happens in the output/forward hooks. - Stuck with 2 tables for compatibility reasons with eb iptables, unifying into 1 table will break users firewall definitions, which depend on being able to do accepts on ethernet rules (which currently get defined via ebtables) and additional filtering via the ip rules (which currently get defined via ip(6)tables). The nwfilter_nftables_driver keeps splitting the ethernet and inet rules in seperate tables "libvirt-nwfilter-ethernet" and "libvirt-nwfilter-other". - Rewrote chain logic, so it is easier to understand, input in the VM interface is filtered in the -input chain(s), output out of the VM inteface is filtered in the -output chain(s). _ethernet and _inet table follow the same style and hook in the same way. - Simplified conntrack handling: rules with accept+conntrack are duplicated to the opposite chain for symmetric behavior, to support the existing ebiptables logic. - Firewall updates continue use tmp names for atomic replacement. Unsupported nwfilter features (for now): - IPSets (potential future support via nft sets) - Reject due to filtering in pre/postrouting, using drop instead of reject, copying logic from existing ebiptables ebtables actions Future improvements: - Use `nft -f` for atomic rule application. - Optional single-table mode via nwfilter.conf. - Optimize boot phase with chain hash comparison. --- Changes in v6: - Add STP support - Add GARP support - Remove comment "priority=%" leftover from debugging Changes in v5: - Fix rarp support via nft raw payload expression Changes in v4: - Fix rarp nft commands "arp saddr ether" "arp daddr ether" - Filter chain creation, don't create unnecessary chains - Apply danpb seperate argument suggestion - Fix table not existing errors in drop all rules - Fix table not existing errors in apply basic rules Changes in v3: - Renamed -other to -inet - Renamed - to _ in table names - Updated rule / chain sorting on ethernet table to to copy ebtables logic - Fix possible broken revert path - Fix remove rules not working in some cases, EBUSY - Shared functions camel case commit - Rename config option - Add extra config params, enable_trace, enable_counters This required passing the config struct to the ebip/nft nwfilter drivers - Add extra augeaus files Changes in v2: - Rename {ebip,nf}tables specific test files in 1 directory instead of seperating them in different directories. - Added default nwfilter.conf file in git, documented including augeas files - Replaced hardcoding of default driver based on existing firewall_backend_priority meson option. - Added nwfilter_driver_conf.{h,c} for configuration handling, to match the common pattern used in other drivers. Dion Bosschieter (3): nwfilter: add nwfilter nftables driver nwfilter: allow use of nftables nwfilter driver via nwfilter.conf nwfilter: add unit tests and test data for nwfilter nftables driver libvirt.spec.in | 7 + po/POTFILES | 2 + src/conf/virnwfilterobj.h | 20 - src/nwfilter/libvirtd_nwfilter.aug | 45 + src/nwfilter/meson.build | 38 + src/nwfilter/nwfilter.conf.in | 50 + src/nwfilter/nwfilter_driver.c | 66 +- src/nwfilter/nwfilter_driver_conf.c | 214 + src/nwfilter/nwfilter_driver_conf.h | 69 + src/nwfilter/nwfilter_ebiptables_driver.c | 4 +- src/nwfilter/nwfilter_ebiptables_driver.h | 2 +- src/nwfilter/nwfilter_gentech_driver.c | 65 +- src/nwfilter/nwfilter_gentech_driver.h | 5 +- src/nwfilter/nwfilter_nftables_driver.c | 2884 ++++++++++++++ src/nwfilter/nwfilter_nftables_driver.h | 28 + src/nwfilter/nwfilter_tech_driver.h | 3 +- src/nwfilter/test_libvirtd_nwfilter.aug.in | 7 + tests/meson.build | 2 + tests/nwfilternftablestest.c | 426 ++ .../ah-ipv6-linux.nftables.args | 298 ++ .../ah-linux.nftables.args | 292 ++ .../all-ipv6-linux.nftables.args | 280 ++ .../all-linux.nftables.args | 274 ++ .../arp-linux.nftables.args | 285 ++ .../comment-linux.nftables.args | 502 +++ .../conntrack-linux.nftables.args | 190 + .../esp-ipv6-linux.nftables.args | 298 ++ .../esp-linux.nftables.args | 292 ++ .../example-1-linux.nftables.args | 252 ++ .../example-2-linux.nftables.args | 352 ++ .../hex-data-linux.nftables.args | 368 ++ .../icmp-direction-linux.nftables.args | 226 ++ .../icmp-direction2-linux.nftables.args | 226 ++ .../icmp-direction3-linux.nftables.args | 176 + .../icmp-linux.nftables.args | 248 ++ .../icmpv6-linux.nftables.args | 316 ++ .../igmp-linux.nftables.args | 292 ++ .../ip-linux.nftables.args | 199 + .../ipt-no-macspoof-linux.nftables.args | 166 + .../ipv6-linux.nftables.args | 481 +++ .../iter1-linux.nftables.args | 292 ++ .../iter2-linux.nftables.args | 3532 +++++++++++++++++ .../iter3-linux.nftables.args | 410 ++ .../mac-linux.nftables.args | 176 + .../rarp-linux.nftables.args | 207 + .../sctp-ipv6-linux.nftables.args | 316 ++ .../sctp-linux.nftables.args | 316 ++ .../stp-linux.nftables.args | 233 ++ .../target-linux.nftables.args | 454 +++ .../target2-linux.nftables.args | 302 ++ .../tcp-ipv6-linux.nftables.args | 316 ++ .../tcp-linux.nftables.args | 452 +++ .../udp-ipv6-linux.nftables.args | 316 ++ .../udp-linux.nftables.args | 316 ++ .../udplite-ipv6-linux.nftables.args | 298 ++ .../udplite-linux.nftables.args | 292 ++ .../vlan-linux.nftables.args | 257 ++ tests/nwfilterxml2nftfirewalltest.c | 432 ++ 58 files changed, 18765 insertions(+), 102 deletions(-) create mode 100644 src/nwfilter/libvirtd_nwfilter.aug create mode 100644 src/nwfilter/nwfilter.conf.in create mode 100644 src/nwfilter/nwfilter_driver_conf.c create mode 100644 src/nwfilter/nwfilter_driver_conf.h create mode 100644 src/nwfilter/nwfilter_nftables_driver.c create mode 100644 src/nwfilter/nwfilter_nftables_driver.h create mode 100644 src/nwfilter/test_libvirtd_nwfilter.aug.in create mode 100644 tests/nwfilternftablestest.c create mode 100755 tests/nwfilterxml2firewalldata/ah-ipv6-linux.nftables.args create mode 100755 tests/nwfilterxml2firewalldata/ah-linux.nftables.args create mode 100755 tests/nwfilterxml2firewalldata/all-ipv6-linux.nftables.args create mode 100755 tests/nwfilterxml2firewalldata/all-linux.nftables.args create mode 100755 tests/nwfilterxml2firewalldata/arp-linux.nftables.args create mode 100755 tests/nwfilterxml2firewalldata/comment-linux.nftables.args create mode 100755 tests/nwfilterxml2firewalldata/conntrack-linux.nftables.args create mode 100755 tests/nwfilterxml2firewalldata/esp-ipv6-linux.nftables.args create mode 100755 tests/nwfilterxml2firewalldata/esp-linux.nftables.args create mode 100755 tests/nwfilterxml2firewalldata/example-1-linux.nftables.args create mode 100755 tests/nwfilterxml2firewalldata/example-2-linux.nftables.args create mode 100755 tests/nwfilterxml2firewalldata/hex-data-linux.nftables.args create mode 100755 tests/nwfilterxml2firewalldata/icmp-direction-linux.nftables.args create mode 100755 tests/nwfilterxml2firewalldata/icmp-direction2-linux.nftables.args create mode 100755 tests/nwfilterxml2firewalldata/icmp-direction3-linux.nftables.args create mode 100755 tests/nwfilterxml2firewalldata/icmp-linux.nftables.args create mode 100755 tests/nwfilterxml2firewalldata/icmpv6-linux.nftables.args create mode 100755 tests/nwfilterxml2firewalldata/igmp-linux.nftables.args create mode 100755 tests/nwfilterxml2firewalldata/ip-linux.nftables.args create mode 100755 tests/nwfilterxml2firewalldata/ipt-no-macspoof-linux.nftables.args create mode 100755 tests/nwfilterxml2firewalldata/ipv6-linux.nftables.args create mode 100755 tests/nwfilterxml2firewalldata/iter1-linux.nftables.args create mode 100755 tests/nwfilterxml2firewalldata/iter2-linux.nftables.args create mode 100755 tests/nwfilterxml2firewalldata/iter3-linux.nftables.args create mode 100755 tests/nwfilterxml2firewalldata/mac-linux.nftables.args create mode 100755 tests/nwfilterxml2firewalldata/rarp-linux.nftables.args create mode 100755 tests/nwfilterxml2firewalldata/sctp-ipv6-linux.nftables.args create mode 100755 tests/nwfilterxml2firewalldata/sctp-linux.nftables.args create mode 100644 tests/nwfilterxml2firewalldata/stp-linux.nftables.args create mode 100755 tests/nwfilterxml2firewalldata/target-linux.nftables.args create mode 100755 tests/nwfilterxml2firewalldata/target2-linux.nftables.args create mode 100755 tests/nwfilterxml2firewalldata/tcp-ipv6-linux.nftables.args create mode 100755 tests/nwfilterxml2firewalldata/tcp-linux.nftables.args create mode 100755 tests/nwfilterxml2firewalldata/udp-ipv6-linux.nftables.args create mode 100755 tests/nwfilterxml2firewalldata/udp-linux.nftables.args create mode 100755 tests/nwfilterxml2firewalldata/udplite-ipv6-linux.nftables.args create mode 100755 tests/nwfilterxml2firewalldata/udplite-linux.nftables.args create mode 100755 tests/nwfilterxml2firewalldata/vlan-linux.nftables.args create mode 100644 tests/nwfilterxml2nftfirewalltest.c -- 2.43.0