[PATCH 1/7] docs: formatstorage: Convert to RST

Friday, 17 December 2021

Apart from the bulk conversion itself, the section names 'general
metadata' and 'target elements' were duplicated between the storage pool
and storage volume sections. To prevent heading name clashes they were
renamed appropriately.

Signed-off-by: Peter Krempa <pkrempa(a)redhat.com&gt;
---
 docs/formatstorage.html.in | 1000 ------------------------------------
 docs/formatstorage.rst     |  823 +++++++++++++++++++++++++++++
 docs/meson.build           |    2 +-
 3 files changed, 824 insertions(+), 1001 deletions(-)
 delete mode 100644 docs/formatstorage.html.in
 create mode 100644 docs/formatstorage.rst

diff --git a/docs/formatstorage.html.in b/docs/formatstorage.html.in
deleted file mode 100644
index 9ee5b89ee6..0000000000
--- a/docs/formatstorage.html.in
+++ /dev/null
@@ -1,1000 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<!DOCTYPE html>
-<html xmlns="http://www.w3.org/1999/xhtml">
-  <body>
-    <h1>Storage pool and volume XML format</h1>
-
-    <ul id="toc"></ul>
-
-    <h2><a id="StoragePool">Storage pool XML</a></h2>
-
-    <p>
-      Although all storage pool backends share the same public APIs and
-      XML format, they have varying levels of capabilities. Some may
-      allow creation of volumes, others may only allow use of pre-existing
-      volumes. Some may have constraints on volume size, or placement.
-    </p>
-    <p>
-      The top level tag for a storage pool document is 'pool'. It has
-      a single attribute <code>type</code>, which is one of
<code>dir</code>,
-      <code>fs</code>, <code>netfs</code>,
<code>disk</code>,
-      <code>iscsi</code>, <code>logical</code>,
<code>scsi</code>
-      (all <span class="since">since 0.4.1</span>),
-      <code>mpath</code> (<span class="since">since
0.7.1</span>),
-      <code>rbd</code> (<span class="since">since
0.9.13</span>),
-      <code>sheepdog</code> (<span class="since">since
0.10.0</span>),
-      <code>gluster</code> (<span class="since">since
1.2.0</span>),
-      <code>zfs</code> (<span class="since">since
1.2.8</span>),
-      <code>vstorage</code> (<span class="since">since
3.1.0</span>),
-      or <code>iscsi-direct</code> (<span class="since">since
4.7.0</span>).
-      This corresponds to the
-      storage backend drivers listed further along in this document.
-    </p>
-    <h3><a id="StoragePoolFirst">General
metadata</a></h3>
-
-    <pre>
-&lt;pool type="iscsi"&gt;
-  &lt;name&gt;virtimages&lt;/name&gt;
-  &lt;uuid&gt;3e3fce45-4f53-4fa7-bb32-11f34168b82b&lt;/uuid&gt;
-  &lt;allocation&gt;10000000&lt;/allocation&gt;
-  &lt;capacity&gt;50000000&lt;/capacity&gt;
-  &lt;available&gt;40000000&lt;/available&gt;
-  ...</pre>
-
-    <dl>
-      <dt><code>name</code></dt>
-      <dd>Providing a name for the pool which is unique to the host.
-        This is mandatory when defining a pool. <span class="since">Since
0.4.1</span></dd>
-      <dt><code>uuid</code></dt>
-      <dd>Providing an identifier for the pool which is globally unique.
-        This is optional when defining a pool, a UUID will be generated if
-        omitted. <span class="since">Since 0.4.1</span></dd>
-      <dt><code>allocation</code></dt>
-      <dd>Providing the total storage allocation for the pool. This may
-        be larger than the sum of the allocation of all volumes due to
-        metadata overhead. This value is in bytes. This is not applicable
-        when creating a pool. <span class="since">Since
0.4.1</span></dd>
-      <dt><code>capacity</code></dt>
-      <dd>Providing the total storage capacity for the pool. Due to
-        underlying device constraints it may not be possible to use the
-        full capacity for storage volumes. This value is in bytes. This
-        is not applicable when creating a pool. <span class="since">Since
0.4.1</span></dd>
-      <dt><code>available</code></dt>
-      <dd>Providing the free space available for allocating new volumes
-        in the pool. Due to underlying device constraints it may not be
-        possible to allocate the entire free space to a single volume.
-        This value is in bytes. This is not applicable when creating a
-        pool. <span class="since">Since 0.4.1</span></dd>
-    </dl>
-
-    <h3><a id="StoragePoolFeatures">Features</a></h3>
-
-    <p>
-      Some pools support optional features:
-    </p>
-
-    <pre>
-...
-&lt;features&gt;
-  &lt;cow state='no'&gt;
-&lt;/features&gt;
-...</pre>
-
-    <p>
-      Valid features are:
-    </p>
-    <ul>
-      <dd><code>cow</code></dd>
-      <dt>Controls whether the filesystem performs copy-on-write (COW) for
-        images in the pool. This may only be set for directory / filesystem
-        pools on the <code>btrfs</code> filesystem. If not set then libvirt
-        will attempt to disable COW on any btrfs filesystems.
-        <span class="since">Since 6.6.0</span>.</dt>
-    </ul>
-
-    <h3><a id="StoragePoolSource">Source
elements</a></h3>
-
-    <p>
-      A single <code>source</code> element is contained within the top level
-      <code>pool</code> element. This tag is used to describe the source of
-      the storage pool. The set of child elements that it will contain
-      depend on the pool type, but come from the following child elements:
-    </p>
-
-    <pre>
-...
-&lt;source&gt;
-  &lt;host name="iscsi.example.com"/&gt;
-  &lt;device path="iqn.2013-06.com.example:iscsi-pool"/&gt;
-  &lt;auth type='chap' username='myname'&gt;
-    &lt;secret usage='mycluster_myname'/&gt;
-  &lt;/auth&gt;
-  &lt;vendor name="Acme"/&gt;
-  &lt;product name="model"/&gt;
-&lt;/source&gt;
-...</pre>
-
-    <pre>
-...
-&lt;source&gt;
-  &lt;device path='/dev/mapper/mpatha' part_separator='no'/&gt;
-  &lt;format type='gpt'/&gt;
-&lt;/source&gt;
-...</pre>
-
-    <pre>
-...
-&lt;source&gt;
-  &lt;adapter type='scsi_host' name='scsi_host1'/&gt;
-&lt;/source&gt;
-...</pre>
-
-    <pre>
-...
-&lt;source&gt;
-  &lt;adapter type='scsi_host'&gt;
-    &lt;parentaddr unique_id='1'&gt;
-      &lt;address domain='0x0000' bus='0x00' slot='0x1f'
addr='0x2'/&gt;
-    &lt;/parentaddr&gt;
-  &lt;/adapter&gt;
-&lt;/source&gt;
-...</pre>
-
-    <pre>
-...
-&lt;source&gt;
-  &lt;adapter type='fc_host' parent='scsi_host5'
wwnn='20000000c9831b4b' wwpn='10000000c9831b4b'/&gt;
-&lt;/source&gt;
-...</pre>
-
-    <pre>
-...
-  &lt;source&gt;
-    &lt;host name='localhost'/&gt;
-    &lt;dir path='/var/lib/libvirt/images'/&gt;
-    &lt;format type='nfs'/&gt;
-    &lt;protocol ver='3'/&gt;
-  &lt;/source&gt;
-...</pre>
-
-    <dl>
-      <dt><code>device</code></dt>
-      <dd>Provides the source for pools backed by physical devices
-        (pool types <code>fs</code>, <code>logical</code>,
<code>disk</code>,
-        <code>iscsi</code>, <code>iscsi-direct</code>,
<code>zfs</code>,
-        <code>vstorage</code>).
-        May be repeated multiple times depending on backend driver. Contains
-        a required attribute <code>path</code> which is either the fully
-        qualified path to the block device node or for <code>iscsi</code>
-        or <code>iscsi-direct</code> the iSCSI Qualified Name (IQN).
-        <span class="since">Since 0.4.1</span>
-        <p>An optional attribute <code>part_separator</code> for each
-        <code>path</code> may be supplied. Valid values for the attribute
-        may be either "yes" or "no". This attribute is to be used for
a
-        <code>disk</code> pool type using a <code>path</code> to
a
-        device mapper multipath device. Setting the attribute to "yes"
-        causes libvirt to attempt to generate and find target volume path's
-        using a "p" separator. The default algorithm used by device mapper
-        is to add the "p" separator only when the source device path ends
-        with a number; however, it's possible to configure the devmapper
-        device to not use 'user_friendly_names' thus creating partitions
-        with the "p" separator even when the device source path does not
-        end with a number.
-        <span class="since">Since
1.3.1</span></p></dd>
-      <dt><code>dir</code></dt>
-      <dd>Provides the source for pools backed by directories (pool
-        types <code>dir</code>, <code>netfs</code>,
<code>gluster</code>),
-        or optionally to select a subdirectory
-        within a pool that resembles a filesystem (pool
-        type <code>gluster</code>). May
-        only occur once. Contains a single attribute <code>path</code>
-        which is the fully qualified path to the backing directory or
-        for a <code>netfs</code> pool type using
<code>format</code>
-        type "cifs", the path to the Samba share without the leading slash.
-        <span class="since">Since 0.4.1</span></dd>
-      <dt><code>adapter</code></dt>
-      <dd>Provides the source for pools backed by SCSI adapters (pool
-        type <code>scsi</code>). May only occur once.
-        <dl>
-          <dt><code>name</code></dt>
-          <dd>The SCSI adapter name (e.g. "scsi_host1", although a name
-            such as "host1" is still supported for backwards compatibility,
-            it is not recommended). The scsi_host name to be used can be
-            determined from the output of a <code>virsh nodedev-list
-            scsi_host</code> command followed by a combination of
-            <code>lspci</code> and <code>virsh nodedev-dumpxml
-            scsi_hostN</code> commands to find the
<code>scsi_hostN</code>
-            to be used. <span class="since">Since 0.6.2</span>
-            <p>
-            It is further recommended to utilize the
-            <code>parentaddr</code> element since it's possible to have
-            the path to which the scsi_hostN uses change between system
-            reboots. <span class="since">Since 1.2.7</span>
-            </p>
-          </dd>
-        </dl>
-        <dl>
-          <dt><code>type</code></dt>
-          <dd>Specifies the adapter type. Valid values are "scsi_host"
or
-            "fc_host". If omitted and the <code>name</code>
attribute is
-            specified, then it defaults to "scsi_host". To keep backwards
-            compatibility, this attribute is optional <b>only</b> for the
-            "scsi_host" adapter, but is mandatory for the "fc_host"
adapter.
-            <span class="since">Since 1.0.5</span>
-            A "fc_host" capable scsi_hostN can be determined by using
-            <code>virsh nodedev-list --cap fc_host</code>.
-            <span class="since">Since 1.2.8</span>
-            <p>
-            Note: Regardless of whether a "scsi_host" adapter type is defined
-            using a <code>name</code> or a
<code>parentaddr</code>, it
-            should refer to a real scsi_host adapter as found through a
-            <code>virsh nodedev-list scsi_host</code> and <code>virsh
-            nodedev-dumpxml scsi_hostN</code> on one of the scsi_host's
-            displayed. It should not refer to a "fc_host" capable scsi_hostN
-            nor should it refer to the vHBA created for some "fc_host"
-            adapter. For a vHBA the <code>nodedev-dumpxml</code>
-            output parent setting will be the "fc_host" capable scsi_hostN
-            value. Additionally, do not refer to an iSCSI scsi_hostN for the
-            "scsi_host" source. An iSCSI scsi_hostN's
-            <code>nodedev-dumpxml</code> output parent field is generally
-            "computer". This is a libvirt created parent value indicating
-            no parent was defined for the node device.
-            </p>
-            </dd>
-        </dl>
-        <dl>
-          <dt><code>wwnn</code> and
<code>wwpn</code></dt>
-          <dd>The required "World Wide Node Name"
(<code>wwnn</code>) and
-            "World Wide Port Name" (<code>wwpn</code>) are used by
the
-            "fc_host" adapter to uniquely identify the vHBA device in the
-            Fibre Channel storage fabric. If the vHBA device already exists
-            as a Node Device, then libvirt will use it; otherwise, the vHBA
-            will be created using the provided values. It is considered a
-            configuration error use the values from the HBA as those would
-            be for a "scsi_host" <code>type</code> pool instead.
The
-            <code>wwnn</code> and <code>wwpn</code> have very
specific
-            format requirements based on the hypervisor being used, thus
-            care should be taken if you decide to generate your own to
-            follow the standards; otherwise, the pool will fail to start
-            with an opaque error message indicating failure to write to
-            the vport_create file during vport create/delete due to
-            "No such file or directory".
-            <span class="since">Since 1.0.4</span>
-          </dd>
-        </dl>
-        <dl>
-          <dt><code>parent</code></dt>
-          <dd>Used by the "fc_host" adapter type to optionally specify
the
-            parent scsi_host device defined in the
-            <a href="formatnode.html">Node Device</a> database as
the
-            <a
href="https://wiki.libvirt.org/page/NPIV_in_libvirt">NPIV<...
-            virtual Host Bus Adapter (vHBA). The value provided must be
-            a vport capable scsi_host. The value is not the scsi_host of
-            the vHBA created by 'virsh nodedev-create', rather it is
-            the parent of that vHBA. If the value is not provided, libvirt
-            will determine the parent based either finding the wwnn,wwpn
-            defined for an existing scsi_host or by creating a vHBA. Providing
-            the parent attribute is also useful for the duplicate pool
-            definition checks. This is more important in environments where
-            both the "fc_host" and "scsi_host" source adapter pools
are being
-            used in order to ensure a new definition doesn't duplicate using
-            the scsi_hostN of some existing storage pool.
-            <span class="since">Since 1.0.4</span>
-          </dd>
-          <dt><code>parent_wwnn</code> and
<code>parent_wwpn</code></dt>
-          <dd>Instead of the <code>parent</code> to specify which
scsi_host
-            to use by name, it's possible to provide the wwnn and wwpn of
-            the parent to be used for the vHBA in order to ensure that
-            between reboots or after a hardware configuration change that
-            the scsi_host parent name doesn't change. Both the parent_wwnn
-            and parent_wwpn must be provided.
-            <span class="since">Since 3.0.0</span>
-          </dd>
-          <dt><code>parent_fabric_wwn</code></dt>
-          <dd>Instead of the <code>parent</code> to specify which
scsi_host
-            to use by name, it's possible to provide the fabric_wwn on which
-            the scsi_host exists. This provides flexibility for choosing
-            a scsi_host that may be available on the fabric rather than
-            requiring a specific parent by wwnn or wwpn to be available.
-            <span class="since">Since 3.0.0</span>
-          </dd>
-          <dt><code>managed</code></dt>
-          <dd>An optional attribute to instruct the SCSI storage backend to
-            manage destroying the vHBA when the pool is destroyed. For
-            configurations that do not provide an already created vHBA
-            from a 'virsh nodedev-create', libvirt will set this property
-            to "yes". For configurations that have already created a vHBA
-            via 'virsh nodedev-create' and are using the wwnn/wwpn from
-            that vHBA and optionally the scsi_host parent, setting this
-            attribute to "yes" will allow libvirt to destroy the node device
-            when the pool is destroyed. If this attribute is set to "no" or
-            not defined in the XML, then libvirt will not destroy the vHBA.
-            <span class="since">Since 1.2.11</span>
-          </dd>
-        </dl>
-        <dl>
-          <dt><code>parentaddr</code></dt>
-          <dd>Used by the "scsi_host" adapter type instead of the
-            <code>name</code> attribute to more uniquely identify the
-            SCSI host. Using a combination of the <code>unique_id</code>
-            attribute and the <code>address</code> element to formulate
-            a PCI address, a search will be performed of the
-            <code>/sys/class/scsi_host/hostNN</code> links for a
-            matching PCI address with a matching <code>unique_id</code>
-            value in the <code>/sys/class/scsi_host/hostNN/unique_id</code>
-            file. The value in the "unique_id" file will be unique enough
-            for the specific PCI address. The <code>hostNN</code> will be
-            used by libvirt as the basis to define which SCSI host is to
-            be used for the currently booted system.
-            <span class="since">Since 1.2.7</span>
-            <dl>
-              <dt><code>address</code></dt>
-              <dd>The PCI address of the scsi_host device to be used. Using
-                a PCI address provides consistent naming across system reboots
-                and kernel reloads. The address will have four attributes:
-                <code>domain</code> (a 2-byte hex integer, not currently
used
-                by qemu), <code>bus</code> (a hex value between 0 and 0xff,
-                inclusive), <code>slot</code> (a hex value between 0x0 and
-                0x1f, inclusive), and <code>function</code> (a value between
-                0 and 7, inclusive). The PCI address can be determined by
-                listing the <code>/sys/bus/pci/devices</code> and the
-                <code>/sys/class/scsi_host</code> directories in order to
-                find the expected scsi_host device. The address will be
-                provided in a format such as "0000:00:1f:2" which can be
-                used to generate the expected PCI address
-                "domain='0x0000' bus='0x00' slot='0x1f'
function='0x0'".
-                Optionally, using the combination of the commands 'virsh
-                nodedev-list scsi_host' and 'virsh nodedev-dumpxml' for a
-                specific list entry and converting the resulting
-                <code>path</code> element as the basis to formulate the
-                correctly formatted PCI address.
-              </dd>
-            </dl>
-            <dl>
-              <dt><code>unique_id</code></dt>
-              <dd>Required <code>parentaddr</code> attribute used to
determine
-                which of the scsi_host adapters for the provided PCI address
-                should be used. The value is determine by contents of the
-                <code>unique_id</code> file for the specific scsi_host
adapter.
-                For a PCI address of "0000:00:1f:2", the unique identifier
files
-                can be found using the command
-                <code>find -H /sys/class/scsi_host/host*/unique_id |
-                xargs grep '[0-9]'</code>. Optionally, the
-                <code>virsh nodedev-dumpxml scsi_hostN</code>' of a
-                specific scsi_hostN list entry will list the
-                <code>unique_id</code> value.
-              </dd>
-            </dl>
-          </dd>
-        </dl>
-      </dd>
-      <dt><code>host</code></dt>
-      <dd>Provides the source for pools backed by storage from a
-        remote server (pool types <code>netfs</code>,
<code>iscsi</code>,
-        <code>iscsi-direct</code>,
-        <code>rbd</code>, <code>sheepdog</code>,
<code>gluster</code>). Will be
-        used in combination with a <code>directory</code>
-        or <code>device</code> element. Contains an attribute
<code>name</code>
-        which is the hostname or IP address of the server. May optionally
-        contain a <code>port</code> attribute for the protocol specific
-        port number. Duplicate storage pool definition checks may perform
-        a cursory check that the same host name by string comparison in the
-        new pool does not match an existing pool's source host name when
-        combined with the <code>directory</code> or
<code>device</code>
-        element. Name resolution of the provided hostname or IP address
-        is left to the storage driver backend interactions with the remote
-        server. See the <a href="storage.html">storage driver
page</a> for
-        any restrictions for specific storage backends.
-        <span class="since">Since 0.4.1</span></dd>
-      <dt><code>initiator</code></dt>
-      <dd>Required by the <code>iscsi-direct</code> pool in order to
provide
-        the iSCSI Qualified Name (IQN) to communicate with the pool's
-        <code>device</code> target IQN. There is one sub-element
-        <code>iqn</code> with the <code>name</code> attribute to
describe
-        the IQN for the initiator.
-        <span class="since">Since 4.7.0</span></dd>
-      <dt><code>auth</code></dt>
-      <dd>If present, the <code>auth</code> element provides the
-        authentication credentials needed to access the source by the
-        setting of the <code>type</code> attribute (pool
-        types <code>iscsi</code>, <code>iscsi-direct</code>,
<code>rbd</code>).
-        The <code>type</code>
-        must be either "chap" or "ceph". Use "ceph" for
-        Ceph RBD (Rados Block Device) network sources and use "iscsi" for CHAP
-        (Challenge-Handshake Authentication Protocol) iSCSI
-        targets. Additionally a mandatory attribute
-        <code>username</code> identifies the username to use during
-        authentication as well as a sub-element <code>secret</code> with
-        a mandatory attribute <code>type</code>, to tie back to a
-        <a href="formatsecret.html">libvirt secret object</a> that
-        holds the actual password or other credentials. The domain XML
-        intentionally does not expose the password, only the reference
-        to the object that manages the password.
-        The <code>secret</code> element requires either a
<code>uuid</code>
-        attribute with the UUID of the secret object or a <code>usage</code>
-        attribute matching the key that was specified in the
-        secret object.  <span class="since">Since 0.9.7 for
"ceph" and
-        1.1.1 for "chap"</span>
-      </dd>
-      <dt><code>name</code></dt>
-      <dd>Provides the source for pools backed by storage from a
-        named element (pool types <code>logical</code>,
<code>rbd</code>,
-        <code>sheepdog</code>, <code>gluster</code>).  Contains
a
-        string identifier.
-        <span class="since">Since 0.4.5</span></dd>
-      <dt><code>format</code></dt>
-      <dd>Provides information about the format of the pool (pool
-        types <code>fs</code>, <code>netfs</code>,
<code>disk</code>,
-        <code>logical</code>). This
-        contains a single attribute <code>type</code> whose value is
-        backend specific. This is typically used to indicate filesystem
-        type, or network filesystem type, or partition table type, or
-        LVM metadata type. All drivers are required to have a default
-        value for this, so it is optional. <span class="since">Since
0.4.1</span></dd>
-
-      <dt><code>protocol</code></dt>
-      <dd>For a <code>netfs</code> Storage Pool provide a mechanism to
-        define which NFS protocol version number will be used to contact
-        the server's NFS service. The attribute <code>ver</code> accepts
-        an unsigned integer as the version number to use.
-        <span class="since">Since 5.1.0</span></dd>
-      <dt><code>vendor</code></dt>
-      <dd>Provides optional information about the vendor of the
-        storage device. This contains a single
-        attribute <code>name</code> whose value is backend
-        specific. <span class="since">Since
0.8.4</span></dd>
-      <dt><code>product</code></dt>
-      <dd>Provides an optional product name of the storage device.
-        This contains a single attribute <code>name</code> whose value
-        is backend specific.  <span class="since">Since
0.8.4</span></dd>
-    </dl>
-
-    <h3><a id="StoragePoolTarget">Target
elements</a></h3>
-
-    <p>
-      A single <code>target</code> element is contained within the top level
-      <code>pool</code> element for some types of pools (pool
-      types <code>dir</code>, <code>fs</code>,
<code>netfs</code>,
-      <code>logical</code>, <code>disk</code>,
<code>iscsi</code>,
-      <code>scsi</code>, <code>mpath</code>,
<code>zfs</code>).
-      This tag is used to describe the mapping of
-      the storage pool into the host filesystem. It can contain the following
-      child elements:
-    </p>
-
-    <pre>
-  ...
-  &lt;target&gt;
-    &lt;path&gt;/dev/disk/by-path&lt;/path&gt;
-    &lt;permissions&gt;
-      &lt;owner&gt;107&lt;/owner&gt;
-      &lt;group&gt;107&lt;/group&gt;
-      &lt;mode&gt;0744&lt;/mode&gt;
-      &lt;label&gt;virt_image_t&lt;/label&gt;
-    &lt;/permissions&gt;
-  &lt;/target&gt;
-&lt;/pool&gt;</pre>
-
-    <dl>
-      <dt><code>path</code></dt>
-      <dd>Provides the location at which the pool will be mapped into
-        the local filesystem namespace, as an absolute path. For a
-        filesystem/directory based pool it will be a fully qualified name of
-        the directory in which volumes will be created. For device based pools
-        it will be a fully qualified name of the directory in which
-        devices nodes exist. For the latter <code>/dev/</code> may seem
-        like the logical choice, however, devices nodes there are not
-        guaranteed stable across reboots, since they are allocated on
-        demand. It is preferable to use a stable location such as one
-        of the <code>/dev/disk/by-{path|id|uuid|label}</code> locations.
-        For <code>logical</code> and <code>zfs</code> pool types,
a
-        provided value is ignored and a default path generated.
-        For a Multipath pool (type <code>mpath</code>), the provided
-        value is ignored and the default value of "/dev/mapper" is used.
-        <span class="since">Since 0.4.1</span>
-      </dd>
-      <dt><code>permissions</code></dt>
-      <dd>This is currently only useful for directory or filesystem based
-        pools, which are mapped as a directory into the local filesystem
-        namespace. It provides information about the permissions to use for the
-        final directory when the pool is built. There are 4 child elements.
-        The <code>mode</code> element contains the octal permission set.
-        The <code>mode</code> defaults to 0711 when not provided.
-        The <code>owner</code> element contains the numeric user ID.
-        The <code>group</code> element contains the numeric group ID.
-        If <code>owner</code> or <code>group</code> aren't
specified when
-        creating a directory, the UID and GID of the libvirtd process are used.
-        The <code>label</code> element contains the MAC (eg SELinux)
-        label string.
-        <span class="since">Since 0.4.1</span>
-        For running directory or filesystem based pools, these fields
-        will be filled with the values used by the existing directory.
-        <span class="since">Since 1.2.16</span>
-      </dd>
-    </dl>
-
-    <h3><a id="StoragePoolExtents">Device
extents</a></h3>
-
-    <p>
-      If a storage pool exposes information about its underlying
-      placement / allocation scheme, the <code>device</code> element
-      within the <code>source</code> element may contain information
-      about its available extents. Some pools have a constraint that
-      a volume must be allocated entirely within a single constraint
-      (eg disk partition pools). Thus the extent information allows an
-      application to determine the maximum possible size for a new
-      volume
-    </p>
-    <p>
-      For storage pools supporting extent information, within each
-      <code>device</code> element there will be zero or more
<code>freeExtent</code>
-      elements. Each of these elements contains two attributes,
<code>start</code>
-      and <code>end</code> which provide the boundaries of the extent on the
-      device, measured in bytes.  <span class="since">Since
0.4.1</span>
-    </p>
-
-    <h3><a id="StoragePoolRefresh">Refresh
overrides</a></h3>
-
-    <p>
-      The optional <code>refresh</code> element can control how the pool and
-      associated volumes are refreshed (pool type <code>rbd</code>). The
-      <code>allocation</code> attribute of the
<code>volume</code> child element
-      controls the method used for computing the allocation of a volume. The
-      valid attribute values are <code>default</code> to compute the actual
-      usage or <code>capacity</code> to use the logical capacity for cases
where
-      computing the allocation is too expensive. The following XML snippet
-      shows the syntax:
-      <pre>
-&lt;pool type="rbd"&gt;
-  &lt;name&gt;myrbdpool&lt;/name&gt;
-...
-  &lt;source/&gt;
-...
-  &lt;refresh&gt;
-    &lt;volume allocation='capacity'/&gt;
-  &lt;/refresh&gt;
-...
-&lt;/pool&gt;
-</pre>
-      <span class="since">Since 5.2.0</span>
-    </p>
-
-    <h3><a id="StoragePoolNamespaces">Storage Pool
Namespaces</a></h3>
-
-    <p>
-      Usage of Storage Pool Namespaces provides a mechanism to provide
-      pool type specific data in a free form or arbitrary manner via
-      XML syntax targeted solely for the needs of the specific pool type
-      which is not otherwise supported in standard XML. For the "fs" and
-      "netfs" pool types this provides a mechanism to provide additional
-      mount options on the command line. For the "rbd" pool this provides
-      a mechanism to override default settings for RBD configuration options.
-    </p>
-    <p>
-      Usage of namespaces comes with no support guarantees. It is intended
-      for developers testing out a concept prior to requesting an explicitly
-      supported XML option in libvirt, and thus should never be used in
-      production.
-    </p>
-    <dl>
-      <dt><code>fs:mount_opts</code></dt>
-      <dd>Provides an XML namespace mechanism to optionally utilize
-        specifically named options for the mount command via the "-o"
-        option for the <code>fs</code> or <code>netfs</code> type
storage
-        pools. In order to designate that the Storage Pool will be using
-        the mechanism, the <code>pool</code> element must be modified to
-        provide the XML namespace attribute syntax as follows:
-
-        <p>
-        xmlns:fs='http://libvirt.org/schemas/storagepool/fs/1.0'
-        </p>
-
-        <p>
-        The <code>fs:mount_opts</code> defines the mount options by
-        specifying multiple <code>fs:option</code> subelements with
-        the attribute <code>name</code> specifying the mount option to
-        be added. The value of the named option is not checked since
-        it's possible options don't exist on all distributions. It is
-        expected that proper and valid options will be supplied for the
-        target host.
-        </p>
-
-        The following XML snippet shows the syntax required in order to
-        utilize for a netfs pool:
-      <pre>
-&lt;pool type="netfs"
xmlns:fs='http://libvirt.org/schemas/storagepool/fs/1.0'&gt;
-  &lt;name&gt;nfsimages&lt;/name&gt;
-...
-  &lt;source&gt;
-...
-  &lt;/source&gt;
-...
-  &lt;target&gt;
-...
-  &lt;/target&gt;
-  &lt;fs:mount_opts&gt;
-    &lt;fs:option name='sync'/&gt;
-    &lt;fs:option name='lazytime'/&gt;
-  &lt;/fs:mount_opts&gt;
-&lt;/pool&gt;
-...</pre>
-
-      <span class="since">Since 5.1.0.</span></dd>
-
-      <dt><code>rbd:config_opts</code></dt>
-      <dd>Provides an XML namespace mechanism to optionally utilize
-        specifically named options for the RBD configuration options
-        via the rados_conf_set API for the <code>rbd</code> type
-        storage pools. In order to designate that the Storage Pool
-        will be using the mechanism, the <code>pool</code> element
-        must be modified to provide the XML namespace attribute
-        syntax as follows:
-
-        <p>
-        xmlns:rbd='http://libvirt.org/schemas/storagepool/rbd/1.0'
-        </p>
-
-        <p>
-        The <code>rbd:config_opts</code> defines the configuration options
-        by specifying multiple <code>rbd:option</code> subelements with
-        the attribute <code>name</code> specifying the configuration option
-        to be added and <code>value</code> specifying the configuration
-        option value. The name and value for each option is only checked
-        to be not empty. The name and value provided are not checked since
-        it's possible options don't exist on all distributions. It is
-        expected that proper and valid options will be supplied for the
-        target host.
-        </p>
-
-        The following XML snippet shows the syntax required in order to
-        utilize
-      <pre>
-&lt;pool type="rbd"
xmlns:rbd='http://libvirt.org/schemas/storagepool/rbd/1.0'&gt;
-  &lt;name&gt;myrbdpool&lt;/name&gt;
-...
-  &lt;source&gt;
-...
-  &lt;/source&gt;
-...
-  &lt;target&gt;
-...
-  &lt;/target&gt;
-...
-  &lt;rbd:config_opts&gt;
-    &lt;rbd:option name='client_mount_timeout' value='45'/&gt;
-    &lt;rbd:option name='rados_mon_op_timeout' value='20'/&gt;
-    &lt;rbd:option name='rados_osd_op_timeout' value='10'/&gt;
-  &lt;/rbd:config_opts&gt;
-&lt;/pool&gt;
-</pre>
-
-      <span class="since">Since 5.1.0.</span></dd>
-
-    </dl>
-
-    <h2><a id="StorageVol">Storage volume XML</a></h2>
-    <p>
-      A storage volume will generally be either a file or a device
-      node; <span class="since">since 1.2.0</span>, an optional
-      output-only attribute <code>type</code> lists the actual type
-      (file, block, dir, network, netdir or ploop), which is also available
-      from <code>virStorageVolGetInfo()</code>.  The storage volume
-      XML format is available <span class="since">since
0.4.1</span>
-    </p>
-
-    <h3><a id="StorageVolFirst">General
metadata</a></h3>
-
-    <pre>
-&lt;volume type='file'&gt;
-  &lt;name&gt;sparse.img&lt;/name&gt;
-  &lt;key&gt;/var/lib/xen/images/sparse.img&lt;/key&gt;
-  &lt;allocation&gt;0&lt;/allocation&gt;
-  &lt;capacity unit="T"&gt;1&lt;/capacity&gt;
-  ...</pre>
-
-    <dl>
-      <dt><code>name</code></dt>
-      <dd>Providing a name for the volume which is unique to the pool.
-        This is mandatory when defining a volume. For a disk pool, the
-        name must be combination of the <code>source</code> device path
-        device and next partition number to be created. For example, if
-        the <code>source</code> device path is /dev/sdb and there are no
-        partitions on the disk, then the name must be sdb1 with the next
-        name being sdb2 and so on.
-        <span class="since">Since 0.4.1</span></dd>
-      <dt><code>key</code></dt>
-      <dd>Providing an identifier for the volume which identifies a
-          single volume. In some cases it's possible to have two distinct keys
-          identifying a single volume. This field cannot be set when creating
-          a volume: it is always generated.
-        <span class="since">Since 0.4.1</span></dd>
-      <dt><code>allocation</code></dt>
-      <dd>Providing the total storage allocation for the volume. This
-        may be smaller than the logical capacity if the volume is sparsely
-        allocated. It may also be larger than the logical capacity if the
-        volume has substantial metadata overhead. This value is in bytes.
-        If omitted when creating a volume, the volume will be fully
-        allocated at time of creation. If set to a value smaller than the
-        capacity, the pool has the <strong>option</strong> of deciding
-        to sparsely allocate a volume. It does not have to honour requests
-        for sparse allocation though. Different types of pools may treat
-        sparse volumes differently. For example, the <code>logical</code>
-        pool will not automatically expand volume's allocation when it
-        gets full; the user is responsible for doing that or configuring
-        dmeventd to do so automatically.<br/>
-        <br/>
-        By default this is specified in bytes, but an optional attribute
-        <code>unit</code> can be specified to adjust the passed value.
-        Values can be: 'B' or 'bytes' for bytes, 'KB'
(kilobytes,
-        10<sup>3</sup> or 1000 bytes), 'K' or 'KiB'
(kibibytes,
-        2<sup>10</sup> or 1024 bytes), 'MB' (megabytes,
10<sup>6</sup>
-        or 1,000,000 bytes), 'M' or 'MiB' (mebibytes,
2<sup>20</sup>
-        or 1,048,576 bytes), 'GB' (gigabytes, 10<sup>9</sup> or
-        1,000,000,000 bytes), 'G' or 'GiB' (gibibytes,
2<sup>30</sup>
-        or 1,073,741,824 bytes), 'TB' (terabytes, 10<sup>12</sup> or
-        1,000,000,000,000 bytes), 'T' or 'TiB' (tebibytes,
-        2<sup>40</sup> or 1,099,511,627,776 bytes), 'PB' (petabytes,
-        10<sup>15</sup> or 1,000,000,000,000,000 bytes), 'P' or
'PiB'
-        (pebibytes, 2<sup>50</sup> or 1,125,899,906,842,624 bytes),
-        'EB' (exabytes, 10<sup>18</sup> or 1,000,000,000,000,000,000
-        bytes), or 'E' or 'EiB' (exbibytes, 2<sup>60</sup>
or
-        1,152,921,504,606,846,976 bytes).  <span class="since">Since
-        0.4.1, multi-character <code>unit</code> since
-        0.9.11</span></dd>
-      <dt><code>capacity</code></dt>
-      <dd>Providing the logical capacity for the volume. This value is
-        in bytes by default, but a <code>unit</code> attribute can be
-        specified with the same semantics as for <code>allocation</code>
-        This is compulsory when creating a volume.
-        <span class="since">Since 0.4.1</span></dd>
-      <dt><code>physical</code></dt>
-      <dd>This output only element provides the host physical size of
-        the target storage volume. The default output <code>unit</code>
-        will be in bytes.
-        <span class="since">Since 3.0.0</span></dd>
-      <dt><code>source</code></dt>
-      <dd>Provides information about the underlying storage allocation
-        of the volume. This may not be available for some pool types.
-        <span class="since">Since 0.4.1</span></dd>
-      <dt><code>target</code></dt>
-      <dd>Provides information about the representation of the volume
-        on the local host. <span class="since">Since
0.4.1</span></dd>
-    </dl>
-
-    <h3><a id="StorageVolTarget">Target
elements</a></h3>
-
-    <p>
-      A single <code>target</code> element is contained within the top level
-      <code>volume</code> element. This tag is used to describe the mapping
of
-      the storage volume into the host filesystem. It can contain the following
-      child elements:
-    </p>
-
-    <pre>
-...
-&lt;target&gt;
-  &lt;path&gt;/var/lib/virt/images/sparse.img&lt;/path&gt;
-  &lt;format type='qcow2'/&gt;
-  &lt;permissions&gt;
-    &lt;owner&gt;107&lt;/owner&gt;
-    &lt;group&gt;107&lt;/group&gt;
-    &lt;mode&gt;0744&lt;/mode&gt;
-    &lt;label&gt;virt_image_t&lt;/label&gt;
-  &lt;/permissions&gt;
-  &lt;timestamps&gt;
-    &lt;atime&gt;1341933637.273190990&lt;/atime&gt;
-    &lt;mtime&gt;1341930622.047245868&lt;/mtime&gt;
-    &lt;ctime&gt;1341930622.047245868&lt;/ctime&gt;
-  &lt;/timestamps&gt;
-  &lt;encryption type='...'&gt;
-    ...
-  &lt;/encryption&gt;
-  &lt;compat&gt;1.1&lt;/compat&gt;
-  &lt;nocow/&gt;
-  &lt;clusterSize unit='KiB'&gt;64&lt;/clusterSize&gt;
-  &lt;features&gt;
-    &lt;lazy_refcounts/&gt;
-  &lt;/features&gt;
-&lt;/target&gt;</pre>
-
-    <dl>
-      <dt><code>path</code></dt>
-      <dd>Provides the location at which the volume can be accessed on
-        the local filesystem, as an absolute path. This is a readonly
-        attribute, so shouldn't be specified when creating a volume.
-        <span class="since">Since 0.4.1</span></dd>
-      <dt><code>format</code></dt>
-      <dd>Provides information about the pool specific volume format.
-        For disk pools it will provide the partition table format type, but is
-        not preserved after a pool refresh or libvirtd restart. Use extended
-        in order to create an extended disk extent partition. For filesystem
-        or directory pools it will provide the file format type, eg cow,
-        qcow, vmdk, raw. If omitted when creating a volume, the pool's
-        default format will be used. The actual format is specified via
-        the <code>type</code> attribute. Consult the
-        <a href="storage.html">storage driver page</a> for the list
of valid
-        volume format type values for each specific pool. The
-        <code>format</code> will be ignored on input for pools without a
-        volume format type value and the default pool format will be used.
-        <span class="since">Since 0.4.1</span></dd>
-      <dt><code>permissions</code></dt>
-      <dd>Provides information about the permissions to use
-        when creating volumes. This is currently only useful for directory
-        or filesystem based pools, where the volumes allocated are simple
-        files. For pools where the volumes are device nodes, the hotplug
-        scripts determine permissions. There are 4 child elements.
-        The <code>mode</code> element contains the octal permission set.
-        The <code>mode</code> defaults to 0600 when not provided.
-        The <code>owner</code> element contains the numeric user ID.
-        The <code>group</code> element contains the numeric group ID.
-        If <code>owner</code> or <code>group</code> aren't
specified when
-        creating a supported volume, the UID and GID of the libvirtd process
-        are used. The <code>label</code> element contains the MAC (eg
SELinux)
-        label string.
-        For existing directory or filesystem based volumes, these fields
-        will be filled with the values used by the existing file.
-        <span class="since">Since 0.4.1</span>
-      </dd>
-      <dt><code>timestamps</code></dt>
-      <dd>Provides timing information about the volume. Up to four
-        sub-elements are present,
-        where <code>atime</code>, <code>btime</code>,
<code>ctime</code>
-        and <code>mtime</code> hold the access, birth, change and
-        modification time of the volume, where known. The used time
-        format is &lt;seconds&gt;.&lt;nanoseconds&gt; since the
-        beginning of the epoch (1 Jan 1970). If nanosecond resolution
-        is 0 or otherwise unsupported by the host OS or filesystem,
-        then the nanoseconds part is omitted.  This is a readonly
-        attribute and is ignored when creating a volume.
-        <span class="since">Since 0.10.0</span>
-      </dd>
-      <dt><code>encryption</code></dt>
-      <dd>If present, specifies how the volume is encrypted.  See
-        the <a href="formatstorageencryption.html">Storage
Encryption</a> page
-        for more information.
-      </dd>
-      <dt><code>compat</code></dt>
-      <dd>Specify compatibility level. So far, this is only used for
-        <code>type='qcow2'</code> volumes. Valid values are
<code>0.10</code>
-        and <code>1.1</code> so far, specifying QEMU version the images
should
-        be compatible with. If the <code>feature</code> element is present,
-        1.1 is used.
-        <span class="since">Since 1.1.0</span> If omitted, 0.10 is
used.
-        <span class="since">Since 1.1.2</span>
-      </dd>
-      <dt><code>nocow</code></dt>
-      <dd>Turn off COW of the newly created volume. So far, this is only valid
-        for a file image in btrfs file system. It will improve performance when
-        the file image is used in VM. To create non-raw file images, it
-        requires QEMU version since 2.1. <span class="since">Since
1.2.7</span>
-      </dd>
-      <dt><code>clusterSize</code></dt>
-      <dd>Changes the qcow2 cluster size which can affect image file size
-        and performance.
-        <span class="since">Since 7.4.0</span>
-      </dd>
-      <dt><code>features</code></dt>
-      <dd>Format-specific features. Only used for <code>qcow2</code>
now.
-        Valid sub-elements are:
-        <ul>
-          <li><code>&lt;lazy_refcounts/&gt;</code> - allow
delayed reference
-          counter updates. <span class="since">Since
1.1.0</span></li>
-        </ul>
-      </dd>
-    </dl>
-
-    <h3><a id="StorageVolBacking">Backing store
elements</a></h3>
-
-    <p>
-      A single <code>backingStore</code> element is contained within the top
level
-      <code>volume</code> element. This tag is used to describe the optional
copy
-      on write, backing store for the storage volume. It can contain the following
-      child elements:
-    </p>
-
-    <pre>
-  ...
-  &lt;backingStore&gt;
-    &lt;path&gt;/var/lib/virt/images/master.img&lt;/path&gt;
-    &lt;format type='raw'/&gt;
-    &lt;permissions&gt;
-      &lt;owner&gt;107&lt;/owner&gt;
-      &lt;group&gt;107&lt;/group&gt;
-      &lt;mode&gt;0744&lt;/mode&gt;
-      &lt;label&gt;virt_image_t&lt;/label&gt;
-    &lt;/permissions&gt;
-  &lt;/backingStore&gt;
-&lt;/volume&gt;</pre>
-
-    <dl>
-      <dt><code>path</code></dt>
-      <dd>Provides the location at which the backing store can be accessed on
-        the local filesystem, as an absolute path. If omitted, there is no
-        backing store for this volume.
-        <span class="since">Since 0.6.0</span></dd>
-      <dt><code>format</code></dt>
-      <dd>Provides information about the pool specific backing store format.
-        For disk pools it will provide the partition type. For filesystem
-        or directory pools it will provide the file format type, eg cow,
-        qcow, vmdk, raw. The actual format is specified via the type attribute.
-        Consult the pool-specific docs for the list of valid
-        values. Most file formats require a backing store of the same format,
-        however, the qcow2 format allows a different backing store format.
-        <span class="since">Since 0.6.0</span></dd>
-      <dt><code>permissions</code></dt>
-      <dd>Provides information about the permissions of the backing file.
-          See volume <code>permissions</code> documentation for explanation
-          of individual fields.
-        <span class="since">Since 0.6.0</span>
-      </dd>
-    </dl>
-
-    <h2><a id="examples">Example
configuration</a></h2>
-
-    <p>
-      Here are a couple of examples, for a more complete set demonstrating
-      every type of storage pool, consult the <a
href="storage.html">storage driver page</a>
-    </p>
-
-    <h3><a id="exampleFile">File based storage
pool</a></h3>
-
-    <pre>
-&lt;pool type="dir"&gt;
-  &lt;name&gt;virtimages&lt;/name&gt;
-  &lt;target&gt;
-    &lt;path&gt;/var/lib/virt/images&lt;/path&gt;
-  &lt;/target&gt;
-&lt;/pool&gt;</pre>
-
-    <h3><a id="exampleISCSI">iSCSI based storage
pool</a></h3>
-
-    <pre>
-&lt;pool type="iscsi"&gt;
-  &lt;name&gt;virtimages&lt;/name&gt;
-  &lt;source&gt;
-    &lt;host name="iscsi.example.com"/&gt;
-    &lt;device path="iqn.2013-06.com.example:iscsi-pool"/&gt;
-    &lt;auth type='chap' username='myuser'&gt;
-      &lt;secret usage='libvirtiscsi'/&gt;
-    &lt;/auth&gt;
-  &lt;/source&gt;
-  &lt;target&gt;
-    &lt;path&gt;/dev/disk/by-path&lt;/path&gt;
-  &lt;/target&gt;
-&lt;/pool&gt;</pre>
-
-    <h3><a id="exampleVol">Storage volume</a></h3>
-
-    <pre>
-&lt;volume&gt;
-  &lt;name&gt;sparse.img&lt;/name&gt;
-  &lt;allocation&gt;0&lt;/allocation&gt;
-  &lt;capacity unit="T"&gt;1&lt;/capacity&gt;
-  &lt;target&gt;
-    &lt;path&gt;/var/lib/virt/images/sparse.img&lt;/path&gt;
-    &lt;permissions&gt;
-      &lt;owner&gt;107&lt;/owner&gt;
-      &lt;group&gt;107&lt;/group&gt;
-      &lt;mode&gt;0744&lt;/mode&gt;
-      &lt;label&gt;virt_image_t&lt;/label&gt;
-    &lt;/permissions&gt;
-  &lt;/target&gt;
-&lt;/volume&gt;</pre>
-
-    <h3><a id="exampleLuks">Storage volume using
LUKS</a></h3>
-
-    <pre>
-&lt;volume&gt;
-  &lt;name&gt;MyLuks.img&lt;/name&gt;
-  &lt;capacity unit="G"&gt;5&lt;/capacity&gt;
-  &lt;target&gt;
-    &lt;path&gt;/var/lib/virt/images/MyLuks.img&lt;/path&gt;
-    &lt;format type='raw'/&gt;
-    &lt;encryption format='luks'&gt;
-      &lt;secret type='passphrase'
uuid='f52a81b2-424e-490c-823d-6bd4235bc572'/&gt;
-    &lt;/encryption&gt;
-  &lt;/target&gt;
-&lt;/volume&gt;
-    </pre>
-  </body>
-</html>
diff --git a/docs/formatstorage.rst b/docs/formatstorage.rst
new file mode 100644
index 0000000000..ae700fef4d
--- /dev/null
+++ b/docs/formatstorage.rst
@@ -0,0 +1,823 @@
+.. role:: since
+
+==================================
+Storage pool and volume XML format
+==================================
+
+.. contents::
+
+Storage pool XML
+----------------
+
+Although all storage pool backends share the same public APIs and XML format,
+they have varying levels of capabilities. Some may allow creation of volumes,
+others may only allow use of pre-existing volumes. Some may have constraints on
+volume size, or placement.
+
+The top level tag for a storage pool document is 'pool'. It has a single
+attribute ``type``, which is one of ``dir``, ``fs``, ``netfs``, ``disk``,
+``iscsi``, ``logical``, ``scsi`` (all :since:`since 0.4.1` ), ``mpath`` (
+:since:`since 0.7.1` ), ``rbd`` ( :since:`since 0.9.13` ), ``sheepdog`` (
+:since:`since 0.10.0` ), ``gluster`` ( :since:`since 1.2.0` ), ``zfs`` (
+:since:`since 1.2.8` ), ``vstorage`` ( :since:`since 3.1.0` ), or
+``iscsi-direct`` ( :since:`since 4.7.0` ). This corresponds to the storage
+backend drivers listed further along in this document.
+
+Storage pool general metadata
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+::
+
+   <pool type="iscsi">
+     <name>virtimages</name>
+     <uuid>3e3fce45-4f53-4fa7-bb32-11f34168b82b</uuid>
+     <allocation>10000000</allocation>
+     <capacity>50000000</capacity>
+     <available>40000000</available>
+     ...
+
+``name``
+   Providing a name for the pool which is unique to the host. This is mandatory
+   when defining a pool. :since:`Since 0.4.1`
+``uuid``
+   Providing an identifier for the pool which is globally unique. This is
+   optional when defining a pool, a UUID will be generated if omitted.
+   :since:`Since 0.4.1`
+``allocation``
+   Providing the total storage allocation for the pool. This may be larger than
+   the sum of the allocation of all volumes due to metadata overhead. This value
+   is in bytes. This is not applicable when creating a pool. :since:`Since
+   0.4.1`
+``capacity``
+   Providing the total storage capacity for the pool. Due to underlying device
+   constraints it may not be possible to use the full capacity for storage
+   volumes. This value is in bytes. This is not applicable when creating a pool.
+   :since:`Since 0.4.1`
+``available``
+   Providing the free space available for allocating new volumes in the pool.
+   Due to underlying device constraints it may not be possible to allocate the
+   entire free space to a single volume. This value is in bytes. This is not
+   applicable when creating a pool. :since:`Since 0.4.1`
+
+Features
+~~~~~~~~
+
+Some pools support optional features:
+
+::
+
+   ...
+   <features>
+     <cow state='no'>
+   </features>
+   ...
+
+Valid features are:
+
+Source elements
+~~~~~~~~~~~~~~~
+
+A single ``source`` element is contained within the top level ``pool`` element.
+This tag is used to describe the source of the storage pool. The set of child
+elements that it will contain depend on the pool type, but come from the
+following child elements:
+
+::
+
+   ...
+   <source>
+     <host name="iscsi.example.com"/>
+     <device path="iqn.2013-06.com.example:iscsi-pool"/>
+     <auth type='chap' username='myname'>
+       <secret usage='mycluster_myname'/>
+     </auth>
+     <vendor name="Acme"/>
+     <product name="model"/>
+   </source>
+   ...
+
+::
+
+   ...
+   <source>
+     <device path='/dev/mapper/mpatha' part_separator='no'/>
+     <format type='gpt'/>
+   </source>
+   ...
+
+::
+
+   ...
+   <source>
+     <adapter type='scsi_host' name='scsi_host1'/>
+   </source>
+   ...
+
+::
+
+   ...
+   <source>
+     <adapter type='scsi_host'>
+       <parentaddr unique_id='1'>
+         <address domain='0x0000' bus='0x00' slot='0x1f'
addr='0x2'/>
+       </parentaddr>
+     </adapter>
+   </source>
+   ...
+
+::
+
+   ...
+   <source>
+     <adapter type='fc_host' parent='scsi_host5'
wwnn='20000000c9831b4b' wwpn='10000000c9831b4b'/>
+   </source>
+   ...
+
+::
+
+   ...
+     <source>
+       <host name='localhost'/>
+       <dir path='/var/lib/libvirt/images'/>
+       <format type='nfs'/>
+       <protocol ver='3'/>
+     </source>
+   ...
+
+``device``
+   Provides the source for pools backed by physical devices (pool types ``fs``,
+   ``logical``, ``disk``, ``iscsi``, ``iscsi-direct``, ``zfs``, ``vstorage``).
+   May be repeated multiple times depending on backend driver. Contains a
+   required attribute ``path`` which is either the fully qualified path to the
+   block device node or for ``iscsi`` or ``iscsi-direct`` the iSCSI Qualified
+   Name (IQN). :since:`Since 0.4.1`
+
+   An optional attribute ``part_separator`` for each ``path`` may be supplied.
+   Valid values for the attribute may be either "yes" or "no". This
attribute is
+   to be used for a ``disk`` pool type using a ``path`` to a device mapper
+   multipath device. Setting the attribute to "yes" causes libvirt to attempt
to
+   generate and find target volume path's using a "p" separator. The
default
+   algorithm used by device mapper is to add the "p" separator only when the
+   source device path ends with a number; however, it's possible to configure
+   the devmapper device to not use 'user_friendly_names' thus creating
+   partitions with the "p" separator even when the device source path does not
+   end with a number. :since:`Since 1.3.1`
+
+``dir``
+   Provides the source for pools backed by directories (pool types ``dir``,
+   ``netfs``, ``gluster``), or optionally to select a subdirectory within a pool
+   that resembles a filesystem (pool type ``gluster``). May only occur once.
+   Contains a single attribute ``path`` which is the fully qualified path to the
+   backing directory or for a ``netfs`` pool type using ``format`` type
"cifs",
+   the path to the Samba share without the leading slash. :since:`Since 0.4.1`
+``adapter``
+   Provides the source for pools backed by SCSI adapters (pool type ``scsi``).
+   May only occur once.
+
+   ``name``
+      The SCSI adapter name (e.g. "scsi_host1", although a name such as
"host1"
+      is still supported for backwards compatibility, it is not recommended).
+      The scsi_host name to be used can be determined from the output of a
+      ``virsh nodedev-list             scsi_host`` command followed by a
+      combination of ``lspci`` and
+      ``virsh nodedev-dumpxml             scsi_hostN`` commands to find the
+      ``scsi_hostN`` to be used. :since:`Since 0.6.2`
+
+      It is further recommended to utilize the ``parentaddr`` element since it's
+      possible to have the path to which the scsi_hostN uses change between
+      system reboots. :since:`Since 1.2.7`
+
+   ``type``
+      Specifies the adapter type. Valid values are "scsi_host" or
"fc_host". If
+      omitted and the ``name`` attribute is specified, then it defaults to
+      "scsi_host". To keep backwards compatibility, this attribute is optional
+      **only** for the "scsi_host" adapter, but is mandatory for the
"fc_host"
+      adapter. :since:`Since 1.0.5` A "fc_host" capable scsi_hostN can be
+      determined by using ``virsh nodedev-list --cap fc_host``. :since:`Since
+      1.2.8`
+
+      Note: Regardless of whether a "scsi_host" adapter type is defined using
a
+      ``name`` or a ``parentaddr``, it should refer to a real scsi_host adapter
+      as found through a ``virsh nodedev-list scsi_host`` and
+      ``virsh             nodedev-dumpxml scsi_hostN`` on one of the scsi_host's
+      displayed. It should not refer to a "fc_host" capable scsi_hostN nor
+      should it refer to the vHBA created for some "fc_host" adapter. For a
vHBA
+      the ``nodedev-dumpxml`` output parent setting will be the "fc_host"
+      capable scsi_hostN value. Additionally, do not refer to an iSCSI
+      scsi_hostN for the "scsi_host" source. An iSCSI scsi_hostN's
+      ``nodedev-dumpxml`` output parent field is generally "computer". This is
a
+      libvirt created parent value indicating no parent was defined for the node
+      device.
+
+   ``wwnn`` and ``wwpn``
+      The required "World Wide Node Name" (``wwnn``) and "World Wide Port
Name"
+      (``wwpn``) are used by the "fc_host" adapter to uniquely identify the
vHBA
+      device in the Fibre Channel storage fabric. If the vHBA device already
+      exists as a Node Device, then libvirt will use it; otherwise, the vHBA
+      will be created using the provided values. It is considered a
+      configuration error use the values from the HBA as those would be for a
+      "scsi_host" ``type`` pool instead. The ``wwnn`` and ``wwpn`` have very
+      specific format requirements based on the hypervisor being used, thus care
+      should be taken if you decide to generate your own to follow the
+      standards; otherwise, the pool will fail to start with an opaque error
+      message indicating failure to write to the vport_create file during vport
+      create/delete due to "No such file or directory". :since:`Since 1.0.4`
+
+   ``parent``
+      Used by the "fc_host" adapter type to optionally specify the parent
+      scsi_host device defined in the `Node Device <formatnode.html>`__ database
+      as the `NPIV <https://wiki.libvirt.org/page/NPIV_in_libvirt>`__ virtual
+      Host Bus Adapter (vHBA). The value provided must be a vport capable
+      scsi_host. The value is not the scsi_host of the vHBA created by 'virsh
+      nodedev-create', rather it is the parent of that vHBA. If the value is not
+      provided, libvirt will determine the parent based either finding the
+      wwnn,wwpn defined for an existing scsi_host or by creating a vHBA.
+      Providing the parent attribute is also useful for the duplicate pool
+      definition checks. This is more important in environments where both the
+      "fc_host" and "scsi_host" source adapter pools are being used
in order to
+      ensure a new definition doesn't duplicate using the scsi_hostN of some
+      existing storage pool. :since:`Since 1.0.4`
+   ``parent_wwnn`` and ``parent_wwpn``
+      Instead of the ``parent`` to specify which scsi_host to use by name, it's
+      possible to provide the wwnn and wwpn of the parent to be used for the
+      vHBA in order to ensure that between reboots or after a hardware
+      configuration change that the scsi_host parent name doesn't change. Both
+      the parent_wwnn and parent_wwpn must be provided. :since:`Since 3.0.0`
+   ``parent_fabric_wwn``
+      Instead of the ``parent`` to specify which scsi_host to use by name, it's
+      possible to provide the fabric_wwn on which the scsi_host exists. This
+      provides flexibility for choosing a scsi_host that may be available on the
+      fabric rather than requiring a specific parent by wwnn or wwpn to be
+      available. :since:`Since 3.0.0`
+   ``managed``
+      An optional attribute to instruct the SCSI storage backend to manage
+      destroying the vHBA when the pool is destroyed. For configurations that do
+      not provide an already created vHBA from a 'virsh nodedev-create', libvirt
+      will set this property to "yes". For configurations that have already
+      created a vHBA via 'virsh nodedev-create' and are using the wwnn/wwpn from
+      that vHBA and optionally the scsi_host parent, setting this attribute to
+      "yes" will allow libvirt to destroy the node device when the pool is
+      destroyed. If this attribute is set to "no" or not defined in the XML,
+      then libvirt will not destroy the vHBA. :since:`Since 1.2.11`
+
+   ``parentaddr``
+      Used by the "scsi_host" adapter type instead of the ``name`` attribute
to
+      more uniquely identify the SCSI host. Using a combination of the
+      ``unique_id`` attribute and the ``address`` element to formulate a PCI
+      address, a search will be performed of the ``/sys/class/scsi_host/hostNN``
+      links for a matching PCI address with a matching ``unique_id`` value in
+      the ``/sys/class/scsi_host/hostNN/unique_id`` file. The value in the
+      "unique_id" file will be unique enough for the specific PCI address. The
+      ``hostNN`` will be used by libvirt as the basis to define which SCSI host
+      is to be used for the currently booted system. :since:`Since 1.2.7`
+
+      ``address``
+         The PCI address of the scsi_host device to be used. Using a PCI address
+         provides consistent naming across system reboots and kernel reloads.
+         The address will have four attributes: ``domain`` (a 2-byte hex
+         integer, not currently used by qemu), ``bus`` (a hex value between 0
+         and 0xff, inclusive), ``slot`` (a hex value between 0x0 and 0x1f,
+         inclusive), and ``function`` (a value between 0 and 7, inclusive). The
+         PCI address can be determined by listing the ``/sys/bus/pci/devices``
+         and the ``/sys/class/scsi_host`` directories in order to find the
+         expected scsi_host device. The address will be provided in a format
+         such as "0000:00:1f:2" which can be used to generate the expected PCI
+         address "domain='0x0000' bus='0x00' slot='0x1f'
function='0x0'".
+         Optionally, using the combination of the commands 'virsh nodedev-list
+         scsi_host' and 'virsh nodedev-dumpxml' for a specific list entry
and
+         converting the resulting ``path`` element as the basis to formulate the
+         correctly formatted PCI address.
+
+      ``unique_id``
+         Required ``parentaddr`` attribute used to determine which of the
+         scsi_host adapters for the provided PCI address should be used. The
+         value is determine by contents of the ``unique_id`` file for the
+         specific scsi_host adapter. For a PCI address of "0000:00:1f:2", the
+         unique identifier files can be found using the command
+         ``find -H /sys/class/scsi_host/host*/unique_id |                 xargs grep
'[0-9]'``.
+         Optionally, the ``virsh nodedev-dumpxml scsi_hostN``' of a specific
+         scsi_hostN list entry will list the ``unique_id`` value.
+``host``
+   Provides the source for pools backed by storage from a remote server (pool
+   types ``netfs``, ``iscsi``, ``iscsi-direct``, ``rbd``, ``sheepdog``,
+   ``gluster``). Will be used in combination with a ``directory`` or ``device``
+   element. Contains an attribute ``name`` which is the hostname or IP address
+   of the server. May optionally contain a ``port`` attribute for the protocol
+   specific port number. Duplicate storage pool definition checks may perform a
+   cursory check that the same host name by string comparison in the new pool
+   does not match an existing pool's source host name when combined with the
+   ``directory`` or ``device`` element. Name resolution of the provided hostname
+   or IP address is left to the storage driver backend interactions with the
+   remote server. See the `storage driver page <storage.html>`__ for any
+   restrictions for specific storage backends. :since:`Since 0.4.1`
+``initiator``
+   Required by the ``iscsi-direct`` pool in order to provide the iSCSI Qualified
+   Name (IQN) to communicate with the pool's ``device`` target IQN. There is one
+   sub-element ``iqn`` with the ``name`` attribute to describe the IQN for the
+   initiator. :since:`Since 4.7.0`
+``auth``
+   If present, the ``auth`` element provides the authentication credentials
+   needed to access the source by the setting of the ``type`` attribute (pool
+   types ``iscsi``, ``iscsi-direct``, ``rbd``). The ``type`` must be either
+   "chap" or "ceph". Use "ceph" for Ceph RBD (Rados Block
Device) network
+   sources and use "iscsi" for CHAP (Challenge-Handshake Authentication
+   Protocol) iSCSI targets. Additionally a mandatory attribute ``username``
+   identifies the username to use during authentication as well as a sub-element
+   ``secret`` with a mandatory attribute ``type``, to tie back to a `libvirt
+   secret object <formatsecret.html>`__ that holds the actual password or other
+   credentials. The domain XML intentionally does not expose the password, only
+   the reference to the object that manages the password. The ``secret`` element
+   requires either a ``uuid`` attribute with the UUID of the secret object or a
+   ``usage`` attribute matching the key that was specified in the secret object.
+   :since:`Since 0.9.7 for "ceph" and 1.1.1 for "chap"`
+``name``
+   Provides the source for pools backed by storage from a named element (pool
+   types ``logical``, ``rbd``, ``sheepdog``, ``gluster``). Contains a string
+   identifier. :since:`Since 0.4.5`
+``format``
+   Provides information about the format of the pool (pool types ``fs``,
+   ``netfs``, ``disk``, ``logical``). This contains a single attribute ``type``
+   whose value is backend specific. This is typically used to indicate
+   filesystem type, or network filesystem type, or partition table type, or LVM
+   metadata type. All drivers are required to have a default value for this, so
+   it is optional. :since:`Since 0.4.1`
+``protocol``
+   For a ``netfs`` Storage Pool provide a mechanism to define which NFS protocol
+   version number will be used to contact the server's NFS service. The
+   attribute ``ver`` accepts an unsigned integer as the version number to use.
+   :since:`Since 5.1.0`
+``vendor``
+   Provides optional information about the vendor of the storage device. This
+   contains a single attribute ``name`` whose value is backend specific.
+   :since:`Since 0.8.4`
+``product``
+   Provides an optional product name of the storage device. This contains a
+   single attribute ``name`` whose value is backend specific. :since:`Since
+   0.8.4`
+
+Storage pool target elements
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+A single ``target`` element is contained within the top level ``pool`` element
+for some types of pools (pool types ``dir``, ``fs``, ``netfs``, ``logical``,
+``disk``, ``iscsi``, ``scsi``, ``mpath``, ``zfs``). This tag is used to describe
+the mapping of the storage pool into the host filesystem. It can contain the
+following child elements:
+
+::
+
+     ...
+     <target>
+       <path>/dev/disk/by-path</path>
+       <permissions>
+         <owner>107</owner>
+         <group>107</group>
+         <mode>0744</mode>
+         <label>virt_image_t</label>
+       </permissions>
+     </target>
+   </pool>
+
+``path``
+   Provides the location at which the pool will be mapped into the local
+   filesystem namespace, as an absolute path. For a filesystem/directory based
+   pool it will be a fully qualified name of the directory in which volumes will
+   be created. For device based pools it will be a fully qualified name of the
+   directory in which devices nodes exist. For the latter ``/dev/`` may seem
+   like the logical choice, however, devices nodes there are not guaranteed
+   stable across reboots, since they are allocated on demand. It is preferable
+   to use a stable location such as one of the
+   ``/dev/disk/by-{path|id|uuid|label}`` locations. For ``logical`` and ``zfs``
+   pool types, a provided value is ignored and a default path generated. For a
+   Multipath pool (type ``mpath``), the provided value is ignored and the
+   default value of "/dev/mapper" is used. :since:`Since 0.4.1`
+``permissions``
+   This is currently only useful for directory or filesystem based pools, which
+   are mapped as a directory into the local filesystem namespace. It provides
+   information about the permissions to use for the final directory when the
+   pool is built. There are 4 child elements. The ``mode`` element contains the
+   octal permission set. The ``mode`` defaults to 0711 when not provided. The
+   ``owner`` element contains the numeric user ID. The ``group`` element
+   contains the numeric group ID. If ``owner`` or ``group`` aren't specified
+   when creating a directory, the UID and GID of the libvirtd process are used.
+   The ``label`` element contains the MAC (eg SELinux) label string.
+   :since:`Since 0.4.1` For running directory or filesystem based pools, these
+   fields will be filled with the values used by the existing directory.
+   :since:`Since 1.2.16`
+
+Device extents
+~~~~~~~~~~~~~~
+
+If a storage pool exposes information about its underlying placement /
+allocation scheme, the ``device`` element within the ``source`` element may
+contain information about its available extents. Some pools have a constraint
+that a volume must be allocated entirely within a single constraint (eg disk
+partition pools). Thus the extent information allows an application to determine
+the maximum possible size for a new volume
+
+For storage pools supporting extent information, within each ``device`` element
+there will be zero or more ``freeExtent`` elements. Each of these elements
+contains two attributes, ``start`` and ``end`` which provide the boundaries of
+the extent on the device, measured in bytes. :since:`Since 0.4.1`
+
+Refresh overrides
+~~~~~~~~~~~~~~~~~
+
+The optional ``refresh`` element can control how the pool and associated volumes
+are refreshed (pool type ``rbd``). The ``allocation`` attribute of the
+``volume`` child element controls the method used for computing the allocation
+of a volume. The valid attribute values are ``default`` to compute the actual
+usage or ``capacity`` to use the logical capacity for cases where computing the
+allocation is too expensive. The following XML snippet shows the syntax:
+
+::
+
+   <pool type="rbd">
+     <name>myrbdpool</name>
+   ...
+     <source/>
+   ...
+     <refresh>
+       <volume allocation='capacity'/>
+     </refresh>
+   ...
+   </pool>
+
+:since:`Since 5.2.0`
+
+Storage Pool Namespaces
+~~~~~~~~~~~~~~~~~~~~~~~
+
+Usage of Storage Pool Namespaces provides a mechanism to provide pool type
+specific data in a free form or arbitrary manner via XML syntax targeted solely
+for the needs of the specific pool type which is not otherwise supported in
+standard XML. For the "fs" and "netfs" pool types this provides a
mechanism to
+provide additional mount options on the command line. For the "rbd" pool this
+provides a mechanism to override default settings for RBD configuration options.
+
+Usage of namespaces comes with no support guarantees. It is intended for
+developers testing out a concept prior to requesting an explicitly supported XML
+option in libvirt, and thus should never be used in production.
+
+``fs:mount_opts``
+   Provides an XML namespace mechanism to optionally utilize specifically named
+   options for the mount command via the "-o" option for the ``fs`` or
``netfs``
+   type storage pools. In order to designate that the Storage Pool will be using
+   the mechanism, the ``pool`` element must be modified to provide the XML
+   namespace attribute syntax as follows:
+
+   xmlns:fs='http://libvirt.org/schemas/storagepool/fs/1.0'
+
+   The ``fs:mount_opts`` defines the mount options by specifying multiple
+   ``fs:option`` subelements with the attribute ``name`` specifying the mount
+   option to be added. The value of the named option is not checked since it's
+   possible options don't exist on all distributions. It is expected that proper
+   and valid options will be supplied for the target host.
+
+   The following XML snippet shows the syntax required in order to utilize for a
+   netfs pool:
+
+   ::
+
+      <pool type="netfs"
xmlns:fs='http://libvirt.org/schemas/storagepool/fs/1.0'>
+        <name>nfsimages</name>
+      ...
+        <source>
+      ...
+        </source>
+      ...
+        <target>
+      ...
+        </target>
+        <fs:mount_opts>
+          <fs:option name='sync'/>
+          <fs:option name='lazytime'/>
+        </fs:mount_opts>
+      </pool>
+      ...
+
+   :since:`Since 5.1.0.`
+
+``rbd:config_opts``
+   Provides an XML namespace mechanism to optionally utilize specifically named
+   options for the RBD configuration options via the rados_conf_set API for the
+   ``rbd`` type storage pools. In order to designate that the Storage Pool will
+   be using the mechanism, the ``pool`` element must be modified to provide the
+   XML namespace attribute syntax as follows:
+
+   xmlns:rbd='http://libvirt.org/schemas/storagepool/rbd/1.0'
+
+   The ``rbd:config_opts`` defines the configuration options by specifying
+   multiple ``rbd:option`` subelements with the attribute ``name`` specifying
+   the configuration option to be added and ``value`` specifying the
+   configuration option value. The name and value for each option is only
+   checked to be not empty. The name and value provided are not checked since
+   it's possible options don't exist on all distributions. It is expected that
+   proper and valid options will be supplied for the target host.
+
+   The following XML snippet shows the syntax required in order to utilize
+
+   ::
+
+      <pool type="rbd"
xmlns:rbd='http://libvirt.org/schemas/storagepool/rbd/1.0'>
+        <name>myrbdpool</name>
+      ...
+        <source>
+      ...
+        </source>
+      ...
+        <target>
+      ...
+        </target>
+      ...
+        <rbd:config_opts>
+          <rbd:option name='client_mount_timeout' value='45'/>
+          <rbd:option name='rados_mon_op_timeout' value='20'/>
+          <rbd:option name='rados_osd_op_timeout' value='10'/>
+        </rbd:config_opts>
+      </pool>
+
+   :since:`Since 5.1.0.`
+
+Storage volume XML
+------------------
+
+A storage volume will generally be either a file or a device node; :since:`since
+1.2.0` , an optional output-only attribute ``type`` lists the actual type (file,
+block, dir, network, netdir or ploop), which is also available from
+``virStorageVolGetInfo()``. The storage volume XML format is available
+:since:`since 0.4.1`
+
+Storage volume general metadata
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+::
+
+   <volume type='file'>
+     <name>sparse.img</name>
+     <key>/var/lib/xen/images/sparse.img</key>
+     <allocation>0</allocation>
+     <capacity unit="T">1</capacity>
+     ...
+
+``name``
+   Providing a name for the volume which is unique to the pool. This is
+   mandatory when defining a volume. For a disk pool, the name must be
+   combination of the ``source`` device path device and next partition number to
+   be created. For example, if the ``source`` device path is /dev/sdb and there
+   are no partitions on the disk, then the name must be sdb1 with the next name
+   being sdb2 and so on. :since:`Since 0.4.1`
+``key``
+   Providing an identifier for the volume which identifies a single volume. In
+   some cases it's possible to have two distinct keys identifying a single
+   volume. This field cannot be set when creating a volume: it is always
+   generated. :since:`Since 0.4.1`
+``allocation``
+   Providing the total storage allocation for the volume. This may be smaller
+   than the logical capacity if the volume is sparsely allocated. It may also be
+   larger than the logical capacity if the volume has substantial metadata
+   overhead. This value is in bytes. If omitted when creating a volume, the
+   volume will be fully allocated at time of creation. If set to a value smaller
+   than the capacity, the pool has the **option** of deciding to sparsely
+   allocate a volume. It does not have to honour requests for sparse allocation
+   though. Different types of pools may treat sparse volumes differently. For
+   example, the ``logical`` pool will not automatically expand volume's
+   allocation when it gets full; the user is responsible for doing that or
+   configuring dmeventd to do so automatically.
+   By default this is specified in bytes, but an optional attribute ``unit`` can
+   be specified to adjust the passed value. Values can be: 'B' or 'bytes'
for
+   bytes, 'KB' (kilobytes, 10\ :sup:`3` or 1000 bytes), 'K' or
'KiB' (kibibytes,
+   2\ :sup:`10` or 1024 bytes), 'MB' (megabytes, 10\ :sup:`6` or 1,000,000
+   bytes), 'M' or 'MiB' (mebibytes, 2\ :sup:`20` or 1,048,576 bytes),
'GB'
+   (gigabytes, 10\ :sup:`9` or 1,000,000,000 bytes), 'G' or 'GiB'
(gibibytes,
+   2\ :sup:`30` or 1,073,741,824 bytes), 'TB' (terabytes, 10\ :sup:`12` or
+   1,000,000,000,000 bytes), 'T' or 'TiB' (tebibytes, 2\ :sup:`40` or
+   1,099,511,627,776 bytes), 'PB' (petabytes, 10\ :sup:`15` or
+   1,000,000,000,000,000 bytes), 'P' or 'PiB' (pebibytes, 2\ :sup:`50`
or
+   1,125,899,906,842,624 bytes), 'EB' (exabytes, 10\ :sup:`18` or
+   1,000,000,000,000,000,000 bytes), or 'E' or 'EiB' (exbibytes, 2\
:sup:`60` or
+   1,152,921,504,606,846,976 bytes). :since:`Since 0.4.1, multi-character
+   ``unit`` since 0.9.11`
+``capacity``
+   Providing the logical capacity for the volume. This value is in bytes by
+   default, but a ``unit`` attribute can be specified with the same semantics as
+   for ``allocation`` This is compulsory when creating a volume. :since:`Since
+   0.4.1`
+``physical``
+   This output only element provides the host physical size of the target
+   storage volume. The default output ``unit`` will be in bytes. :since:`Since
+   3.0.0`
+``source``
+   Provides information about the underlying storage allocation of the volume.
+   This may not be available for some pool types. :since:`Since 0.4.1`
+``target``
+   Provides information about the representation of the volume on the local
+   host. :since:`Since 0.4.1`
+
+Storage volume target elements
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+A single ``target`` element is contained within the top level ``volume``
+element. This tag is used to describe the mapping of the storage volume into the
+host filesystem. It can contain the following child elements:
+
+::
+
+   ...
+   <target>
+     <path>/var/lib/virt/images/sparse.img</path>
+     <format type='qcow2'/>
+     <permissions>
+       <owner>107</owner>
+       <group>107</group>
+       <mode>0744</mode>
+       <label>virt_image_t</label>
+     </permissions>
+     <timestamps>
+       <atime>1341933637.273190990</atime>
+       <mtime>1341930622.047245868</mtime>
+       <ctime>1341930622.047245868</ctime>
+     </timestamps>
+     <encryption type='...'>
+       ...
+     </encryption>
+     <compat>1.1</compat>
+     <nocow/>
+     <clusterSize unit='KiB'>64</clusterSize>
+     <features>
+       <lazy_refcounts/>
+     </features>
+   </target>
+
+``path``
+   Provides the location at which the volume can be accessed on the local
+   filesystem, as an absolute path. This is a readonly attribute, so shouldn't
+   be specified when creating a volume. :since:`Since 0.4.1`
+``format``
+   Provides information about the pool specific volume format. For disk pools it
+   will provide the partition table format type, but is not preserved after a
+   pool refresh or libvirtd restart. Use extended in order to create an extended
+   disk extent partition. For filesystem or directory pools it will provide the
+   file format type, eg cow, qcow, vmdk, raw. If omitted when creating a volume,
+   the pool's default format will be used. The actual format is specified via
+   the ``type`` attribute. Consult the `storage driver page <storage.html>`__
+   for the list of valid volume format type values for each specific pool. The
+   ``format`` will be ignored on input for pools without a volume format type
+   value and the default pool format will be used. :since:`Since 0.4.1`
+``permissions``
+   Provides information about the permissions to use when creating volumes. This
+   is currently only useful for directory or filesystem based pools, where the
+   volumes allocated are simple files. For pools where the volumes are device
+   nodes, the hotplug scripts determine permissions. There are 4 child elements.
+   The ``mode`` element contains the octal permission set. The ``mode`` defaults
+   to 0600 when not provided. The ``owner`` element contains the numeric user
+   ID. The ``group`` element contains the numeric group ID. If ``owner`` or
+   ``group`` aren't specified when creating a supported volume, the UID and GID
+   of the libvirtd process are used. The ``label`` element contains the MAC (eg
+   SELinux) label string. For existing directory or filesystem based volumes,
+   these fields will be filled with the values used by the existing file.
+   :since:`Since 0.4.1`
+``timestamps``
+   Provides timing information about the volume. Up to four sub-elements are
+   present, where ``atime``, ``btime``, ``ctime`` and ``mtime`` hold the access,
+   birth, change and modification time of the volume, where known. The used time
+   format is <seconds>.<nanoseconds> since the beginning of the epoch (1 Jan
+   1970). If nanosecond resolution is 0 or otherwise unsupported by the host OS
+   or filesystem, then the nanoseconds part is omitted. This is a readonly
+   attribute and is ignored when creating a volume. :since:`Since 0.10.0`
+``encryption``
+   If present, specifies how the volume is encrypted. See the `Storage
+   Encryption <formatstorageencryption.html>`__ page for more information.
+``compat``
+   Specify compatibility level. So far, this is only used for ``type='qcow2'``
+   volumes. Valid values are ``0.10`` and ``1.1`` so far, specifying QEMU
+   version the images should be compatible with. If the ``feature`` element is
+   present, 1.1 is used. :since:`Since 1.1.0` If omitted, 0.10 is used.
+   :since:`Since 1.1.2`
+``nocow``
+   Turn off COW of the newly created volume. So far, this is only valid for a
+   file image in btrfs file system. It will improve performance when the file
+   image is used in VM. To create non-raw file images, it requires QEMU version
+   since 2.1. :since:`Since 1.2.7`
+``clusterSize``
+   Changes the qcow2 cluster size which can affect image file size and
+   performance. :since:`Since 7.4.0`
+``features``
+   Format-specific features. Only used for ``qcow2`` now. Valid sub-elements
+   are:
+
+   -  ``<lazy_refcounts/>`` - allow delayed reference counter updates.
+      :since:`Since 1.1.0`
+
+Backing store elements
+~~~~~~~~~~~~~~~~~~~~~~
+
+A single ``backingStore`` element is contained within the top level ``volume``
+element. This tag is used to describe the optional copy on write, backing store
+for the storage volume. It can contain the following child elements:
+
+::
+
+     ...
+     <backingStore>
+       <path>/var/lib/virt/images/master.img</path>
+       <format type='raw'/>
+       <permissions>
+         <owner>107</owner>
+         <group>107</group>
+         <mode>0744</mode>
+         <label>virt_image_t</label>
+       </permissions>
+     </backingStore>
+   </volume>
+
+``path``
+   Provides the location at which the backing store can be accessed on the local
+   filesystem, as an absolute path. If omitted, there is no backing store for
+   this volume. :since:`Since 0.6.0`
+``format``
+   Provides information about the pool specific backing store format. For disk
+   pools it will provide the partition type. For filesystem or directory pools
+   it will provide the file format type, eg cow, qcow, vmdk, raw. The actual
+   format is specified via the type attribute. Consult the pool-specific docs
+   for the list of valid values. Most file formats require a backing store of
+   the same format, however, the qcow2 format allows a different backing store
+   format. :since:`Since 0.6.0`
+``permissions``
+   Provides information about the permissions of the backing file. See volume
+   ``permissions`` documentation for explanation of individual fields.
+   :since:`Since 0.6.0`
+
+Example configuration
+---------------------
+
+Here are a couple of examples, for a more complete set demonstrating every type
+of storage pool, consult the `storage driver page <storage.html>`__
+
+File based storage pool
+~~~~~~~~~~~~~~~~~~~~~~~
+
+::
+
+   <pool type="dir">
+     <name>virtimages</name>
+     <target>
+       <path>/var/lib/virt/images</path>
+     </target>
+   </pool>
+
+iSCSI based storage pool
+~~~~~~~~~~~~~~~~~~~~~~~~
+
+::
+
+   <pool type="iscsi">
+     <name>virtimages</name>
+     <source>
+       <host name="iscsi.example.com"/>
+       <device path="iqn.2013-06.com.example:iscsi-pool"/>
+       <auth type='chap' username='myuser'>
+         <secret usage='libvirtiscsi'/>
+       </auth>
+     </source>
+     <target>
+       <path>/dev/disk/by-path</path>
+     </target>
+   </pool>
+
+Storage volume
+~~~~~~~~~~~~~~
+
+::
+
+   <volume>
+     <name>sparse.img</name>
+     <allocation>0</allocation>
+     <capacity unit="T">1</capacity>
+     <target>
+       <path>/var/lib/virt/images/sparse.img</path>
+       <permissions>
+         <owner>107</owner>
+         <group>107</group>
+         <mode>0744</mode>
+         <label>virt_image_t</label>
+       </permissions>
+     </target>
+   </volume>
+
+Storage volume using LUKS
+~~~~~~~~~~~~~~~~~~~~~~~~~
+
+::
+
+   <volume>
+     <name>MyLuks.img</name>
+     <capacity unit="G">5</capacity>
+     <target>
+       <path>/var/lib/virt/images/MyLuks.img</path>
+       <format type='raw'/>
+       <encryption format='luks'>
+         <secret type='passphrase'
uuid='f52a81b2-424e-490c-823d-6bd4235bc572'/>
+       </encryption>
+     </target>
+   </volume>
diff --git a/docs/meson.build b/docs/meson.build
index 3aabb52950..3c496cb33a 100644
--- a/docs/meson.build
+++ b/docs/meson.build
@@ -69,7 +69,6 @@ docs_html_in_files = [
   'formatsnapshot',
   'formatstoragecaps',
   'formatstorageencryption',
-  'formatstorage',
   'goals',
   'governance',
   'hooks',
@@ -116,6 +115,7 @@ docs_rst_files = [
   'formatbackup',
   'formatcheckpoint',
   'formatdomain',
+  'formatstorage',
   'glib-adoption',
   'hacking',
   'libvirt-go',
-- 
2.31.1


    

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

[PATCH 1/7] docs: formatstorage: Convert to RST