2:55 a.m.
For USB device, the <address> is optional, so is usb-net.
Currently, we couldn't assign default usb address to usb
devices, so we definitly ignore it during the assignment of PCI
address.
Libvirt XML sample:
<devices>
<interface type='user'>
<mac address='52:54:00:32:6a:91'/>
<model type='usb-net'/>
<alias name='net1'/>
<address type='usb' bus='0' port='1'/>
</interface>
</devices>
qemu commandline:
qemu ${other_vm_args}
-netdev user,id=hostnet1 \
-device usb-net,netdev=hostnet1,id=net1,\
mac=52:54:00:32:6a:91,bus=usb.0,port=1
---
docs/formatdomain.html.in | 29 +++++++++++------------------
src/conf/domain_conf.c | 15 ++++++++++++---
src/conf/domain_conf.h | 1 +
src/qemu/qemu_command.c | 8 +++++++-
4 files changed, 31 insertions(+), 22 deletions(-)
diff --git a/docs/formatdomain.html.in b/docs/formatdomain.html.in
index bb0b199..2cba848 100644
--- a/docs/formatdomain.html.in
+++ b/docs/formatdomain.html.in
@@ -2946,24 +2946,17 @@
<p>
For hypervisors which support this, you can set the model of
- emulated network interface card.
- </p>
-
- <p>
- The values for <code>type</code> aren't defined specifically by
- libvirt, but by what the underlying hypervisor supports (if
- any). For QEMU and KVM you can get a list of supported models
- with these commands:
- </p>
-
-<pre>
-qemu -net nic,model=? /dev/null
-qemu-kvm -net nic,model=? /dev/null
-</pre>
-
- <p>
- Typical values for QEMU and KVM include:
- ne2k_isa i82551 i82557b i82559er ne2k_pci pcnet rtl8139 e1000 virtio
+ emulated network interface card. For QEMU and KVM, the supported NIC models
+ are virtio, ne2k_isa, ne2k_pci, pcnet, rtl8139, e1000, usb-net
+ <span class="since">(since 1.0.2)</span>, spapr-vlan(only
PPC64).
+ For Xen, there are ne2k_isa, ne2k_pci, pcnet, rtl8139, e1000, netfront. For
VMWare,
+ vlance, vmxnet, vmxnet2, vmxnet3 are supported. And for Vbox, Am79C970A, Am79C973,
+ 82540EM, 82545EM, 82543GC are its supported models.
+ (All of these models are PCI devices, except usb-net which emulates a Netchip
+ Linux-USB Ethernet/RNDIS usb ethernet device). For models of PCI type, a
sub-element
+ <code><address></code> with
<code>type='pci'</code> can be used to tie
+ the device to a particular PCI slot. It is
<code>type='usb'</code> for usb-net
+ to tie to USB controller. <a href="#elementsAddress">documented
above</a>.
</p>
<h5><a name="elementsDriverBackendOptions">Setting NIC
driver-specific options</a></h5>
diff --git a/src/conf/domain_conf.c b/src/conf/domain_conf.c
index 4c4d60f..2d55db7 100644
--- a/src/conf/domain_conf.c
+++ b/src/conf/domain_conf.c
@@ -702,6 +702,7 @@ VIR_ENUM_IMPL(virDomainNICModel,
VIR_DOMAIN_NIC_MODEL_LAST,
"default",
"spapr-vlan", /* qemu */
+ "usb-net",
"virtio", /* qemu and vbox */
@@ -5177,14 +5178,15 @@ virDomainNetDefParseXML(virCapsPtr caps,
goto error;
}
- /* XXX what about ISA/USB based NIC models - once we support
+ /* XXX what about ISA based NIC models - once we support
* them we should make sure address type is correct */
if (def->info.type != VIR_DOMAIN_DEVICE_ADDRESS_TYPE_NONE &&
def->info.type != VIR_DOMAIN_DEVICE_ADDRESS_TYPE_SPAPRVIO &&
def->info.type != VIR_DOMAIN_DEVICE_ADDRESS_TYPE_VIRTIO_S390 &&
- def->info.type != VIR_DOMAIN_DEVICE_ADDRESS_TYPE_PCI) {
+ def->info.type != VIR_DOMAIN_DEVICE_ADDRESS_TYPE_PCI &&
+ def->info.type != VIR_DOMAIN_DEVICE_ADDRESS_TYPE_USB) {
virReportError(VIR_ERR_INTERNAL_ERROR, "%s",
- _("Network interfaces must use 'pci' address
type"));
+ _("Network interfaces have incorrect address type"));
goto error;
}
@@ -5391,6 +5393,13 @@ virDomainNetDefParseXML(virCapsPtr caps,
}
def->driver.virtio.event_idx = idx;
}
+ } else if (def->model == VIR_DOMAIN_NIC_MODEL_USB_NET) {
+ if (def->info.type != VIR_DOMAIN_DEVICE_ADDRESS_TYPE_NONE &&
+ def->info.type != VIR_DOMAIN_DEVICE_ADDRESS_TYPE_USB) {
+ virReportError(VIR_ERR_CONFIG_UNSUPPORTED, "%s",
+ _("Interface of usb-net model requires address of usb
type"));
+ goto error;
+ }
}
def->linkstate = VIR_DOMAIN_NET_INTERFACE_LINK_STATE_DEFAULT;
diff --git a/src/conf/domain_conf.h b/src/conf/domain_conf.h
index 6ec2801..7e23bd4 100644
--- a/src/conf/domain_conf.h
+++ b/src/conf/domain_conf.h
@@ -771,6 +771,7 @@ struct _virDomainFSDef {
enum virDomainNICModel {
VIR_DOMAIN_NIC_MODEL_DEFAULT = 0,
VIR_DOMAIN_NIC_MODEL_SPAPR_VLAN,
+ VIR_DOMAIN_NIC_MODEL_USB_NET,
VIR_DOMAIN_NIC_MODEL_VIRTIO,
VIR_DOMAIN_NIC_MODEL_NE2K_ISA,
VIR_DOMAIN_NIC_MODEL_NE2K_PCI,
diff --git a/src/qemu/qemu_command.c b/src/qemu/qemu_command.c
index fcd7512..89c9668 100644
--- a/src/qemu/qemu_command.c
+++ b/src/qemu/qemu_command.c
@@ -1557,7 +1557,8 @@ qemuAssignDevicePCISlots(virDomainDefPtr def,
* instead of here.
*/
if ((def->nets[i]->type == VIR_DOMAIN_NET_TYPE_HOSTDEV) ||
- (def->nets[i]->info.type != VIR_DOMAIN_DEVICE_ADDRESS_TYPE_NONE)) {
+ (def->nets[i]->info.type != VIR_DOMAIN_DEVICE_ADDRESS_TYPE_NONE) ||
+ (def->nets[i]->model == VIR_DOMAIN_NIC_MODEL_USB_NET)) {
continue;
}
if (qemuDomainPCIAddressSetNextAddr(addrs, &def->nets[i]->info) <
0)
@@ -3179,6 +3180,11 @@ qemuBuildNicDevStr(virDomainNetDefPtr net,
nic = "virtio-net-pci";
}
usingVirtio = true;
+ } else if ((net->model == VIR_DOMAIN_NIC_MODEL_USB_NET) &&
+ !qemuCapsGet(caps, QEMU_CAPS_DEVICE_USB_NET)) {
+ virReportError(VIR_ERR_CONFIG_UNSUPPORTED, "%s",
+ _("usb-net is not supported in this QEMU binary"));
+ goto error;
} else {
nic = virDomainNICModelTypeToString(net->model);
}
--
1.7.11.2