This is however supported only on domain interfaces with
type='network'. Moreover, target network needs to have at least
inbound QoS set. This is required by hierarchical traffic shaping.
From now on, the required attribute for <inbound/> is either
'average'
(old) or 'floor' (new). This new attribute can be used
just for
interfaces type of network (<interface type='network'/>) currently.
---
docs/formatdomain.html.in | 20 ++++++++++++--
docs/schemas/networkcommon.rng | 5 +++
src/conf/domain_conf.c | 6 +++-
src/conf/netdev_bandwidth_conf.c | 54 +++++++++++++++++++++++++++++++++-----
src/conf/netdev_bandwidth_conf.h | 3 +-
src/conf/network_conf.c | 4 +-
src/util/virnetdevbandwidth.h | 1 +
7 files changed, 78 insertions(+), 15 deletions(-)
diff --git a/docs/formatdomain.html.in b/docs/formatdomain.html.in
index c8da33d..da8184a 100644
--- a/docs/formatdomain.html.in
+++ b/docs/formatdomain.html.in
@@ -3047,7 +3047,7 @@ qemu-kvm -net nic,model=? /dev/null
<source network='default'/>
<target dev='vnet0'/>
<b><bandwidth>
- <inbound average='1000' peak='5000'
burst='1024'/>
+ <inbound average='1000' peak='5000' floor='200'
burst='1024'/>
<outbound average='128' peak='256'
burst='256'/>
</bandwidth></b>
</interface>
@@ -3062,14 +3062,28 @@ qemu-kvm -net nic,model=? /dev/null
children element out result in no QoS applied on that traffic direction.
So, when you want to shape only domain's incoming traffic, use
<code>inbound</code> only, and vice versa. Each of these elements have
one
- mandatory attribute <code>average</code>. It specifies average bit rate
on
+ mandatory attribute <code>average</code> (or
<code>floor</code> as
+ described below). It specifies average bit rate on
interface being shaped. Then there are two optional attributes:
<code>peak</code>, which specifies maximum rate at which interface can
send
data, and <code>burst</code>, amount of bytes that can be burst at
<code>peak</code> speed. Accepted values for attributes are integer
numbers. The units for <code>average</code> and
<code>peak</code> attributes
are kilobytes per second, and for the <code>burst</code> just
kilobytes.
- <span class="since">Since 0.9.4</span>
+ <span class="since">Since 0.9.4</span> The
<code>inbound</code> can
+ optionally have <code>floor</code> attribute. This is there for
+ guaranteeing minimal throughput for shaped interfaces. This, however,
+ requires that all traffic goes through one point where QoS decisions can
+ take place. That's why this attribute works only for virtual networks for
+ now (that is <code><interface
type='network'/></code>. Moreover, the
+ virtual network the interface is connected to is required to have at least
+ inbound Qos set (<code>average</code> at least). Moreover, with
+ <code>floor<code> attribute users don't need to specify
+ <code>average</code>. However, <code>peak</code> and
<code>burst</code>
+ attributes still require <code>average</code>. Currently, linux kernel
+ doesn't allow egress qdiscs to have any classes therefore
+ <code>floor</code> can be applied only on
<code>inbound</code> and not
+ </code>outbound</code>. <span class="since">Since
1.0.1</span>
</p>
<h5><a name="elementVlanTag">Setting VLAN tag (on supported
network types only)</a></h5>
diff --git a/docs/schemas/networkcommon.rng b/docs/schemas/networkcommon.rng
index c7749e7..51ff759 100644
--- a/docs/schemas/networkcommon.rng
+++ b/docs/schemas/networkcommon.rng
@@ -149,6 +149,11 @@
</attribute>
</optional>
<optional>
+ <attribute name="floor">
+ <ref name="speed"/>
+ </attribute>
+ </optional>
+ <optional>
<attribute name='burst'>
<ref name="BurstSize"/>
</attribute>
diff --git a/src/conf/domain_conf.c b/src/conf/domain_conf.c
index 99f03a9..bf23b77 100644
--- a/src/conf/domain_conf.c
+++ b/src/conf/domain_conf.c
@@ -4742,7 +4742,8 @@ virDomainActualNetDefParseXML(xmlNodePtr node,
bandwidth_node = virXPathNode("./bandwidth", ctxt);
if (bandwidth_node &&
- !(actual->bandwidth = virNetDevBandwidthParse(bandwidth_node)))
+ !(actual->bandwidth = virNetDevBandwidthParse(bandwidth_node,
+ actual->type)))
goto error;
vlanNode = virXPathNode("./vlan", ctxt);
@@ -4930,7 +4931,8 @@ virDomainNetDefParseXML(virCapsPtr caps,
goto error;
}
} else if (xmlStrEqual(cur->name, BAD_CAST "bandwidth")) {
- if (!(def->bandwidth = virNetDevBandwidthParse(cur)))
+ if (!(def->bandwidth = virNetDevBandwidthParse(cur,
+ def->type)))
goto error;
} else if (xmlStrEqual(cur->name, BAD_CAST "vlan")) {
if (virNetDevVlanParse(cur, ctxt, &def->vlan) < 0)
diff --git a/src/conf/netdev_bandwidth_conf.c b/src/conf/netdev_bandwidth_conf.c
index 261718f..38c5a5b 100644
--- a/src/conf/netdev_bandwidth_conf.c
+++ b/src/conf/netdev_bandwidth_conf.c
@@ -26,6 +26,7 @@
#include "virterror_internal.h"
#include "util.h"
#include "memory.h"
+#include "domain_conf.h"
#define VIR_FROM_THIS VIR_FROM_NONE
@@ -36,6 +37,7 @@ virNetDevBandwidthParseRate(xmlNodePtr node, virNetDevBandwidthRatePtr
rate)
char *average = NULL;
char *peak = NULL;
char *burst = NULL;
+ char *floor = NULL;
if (!node || !rate) {
virReportError(VIR_ERR_INVALID_ARG, "%s",
@@ -46,6 +48,7 @@ virNetDevBandwidthParseRate(xmlNodePtr node, virNetDevBandwidthRatePtr
rate)
average = virXMLPropString(node, "average");
peak = virXMLPropString(node, "peak");
burst = virXMLPropString(node, "burst");
+ floor = virXMLPropString(node, "floor");
if (average) {
if (virStrToLong_ull(average, NULL, 10, &rate->average) < 0) {
@@ -54,9 +57,15 @@ virNetDevBandwidthParseRate(xmlNodePtr node, virNetDevBandwidthRatePtr
rate)
average);
goto cleanup;
}
- } else {
+ } else if (!floor) {
virReportError(VIR_ERR_XML_DETAIL, "%s",
- _("Missing mandatory average attribute"));
+ _("Missing mandatory average or floor attributes"));
+ goto cleanup;
+ }
+
+ if ((peak || burst) && !average) {
+ virReportError(VIR_ERR_CONFIG_UNSUPPORTED, "%s",
+ _("'peak' and 'burst' require
'average' attribute"));
goto cleanup;
}
@@ -74,12 +83,20 @@ virNetDevBandwidthParseRate(xmlNodePtr node, virNetDevBandwidthRatePtr
rate)
goto cleanup;
}
+ if (floor && virStrToLong_ull(floor, NULL, 10, &rate->floor) < 0)
{
+ virReportError(VIR_ERR_CONFIG_UNSUPPORTED,
+ _("could not convert %s"),
+ floor);
+ goto cleanup;
+ }
+
ret = 0;
cleanup:
VIR_FREE(average);
VIR_FREE(peak);
VIR_FREE(burst);
+ VIR_FREE(floor);
return ret;
}
@@ -87,13 +104,17 @@ cleanup:
/**
* virNetDevBandwidthParse:
* @node: XML node
+ * @net_type: one of virDomainNetType
*
- * Parse bandwidth XML and return pointer to structure
+ * Parse bandwidth XML and return pointer to structure.
+ * @net_type tell to which type will/is interface connected to.
+ * Pass -1 if this is not called on interface.
*
* Returns !NULL on success, NULL on error.
*/
virNetDevBandwidthPtr
-virNetDevBandwidthParse(xmlNodePtr node)
+virNetDevBandwidthParse(xmlNodePtr node,
+ int net_type)
{
virNetDevBandwidthPtr def = NULL;
xmlNodePtr cur = node->children;
@@ -144,6 +165,13 @@ virNetDevBandwidthParse(xmlNodePtr node)
/* helper reported error for us */
goto error;
}
+
+ if (def->in->floor && net_type != VIR_DOMAIN_NET_TYPE_NETWORK) {
+ virReportError(VIR_ERR_CONFIG_UNSUPPORTED, "%s",
+ _("floor attribute is supported only for "
+ "interfaces of type network"));
+ goto error;
+ }
}
if (out) {
@@ -156,6 +184,13 @@ virNetDevBandwidthParse(xmlNodePtr node)
/* helper reported error for us */
goto error;
}
+
+ if (def->out->floor) {
+ virReportError(VIR_ERR_CONFIG_UNSUPPORTED, "%s",
+ _("'floor' attribute allowed "
+ "only in <inbound> element"));
+ goto error;
+ }
}
return def;
@@ -175,13 +210,18 @@ virNetDevBandwidthRateFormat(virNetDevBandwidthRatePtr def,
if (!def)
return 0;
- if (def->average) {
- virBufferAsprintf(buf, " <%s average='%llu'", elem_name,
- def->average);
+ if (def->average || def->floor) {
+ virBufferAsprintf(buf, " <%s", elem_name);
+
+ if (def->average)
+ virBufferAsprintf(buf, " average='%llu'",
def->average);
if (def->peak)
virBufferAsprintf(buf, " peak='%llu'", def->peak);
+ if (def->floor)
+ virBufferAsprintf(buf, " floor='%llu'", def->floor);
+
if (def->burst)
virBufferAsprintf(buf, " burst='%llu'", def->burst);
virBufferAddLit(buf, "/>\n");
diff --git a/src/conf/netdev_bandwidth_conf.h b/src/conf/netdev_bandwidth_conf.h
index bca5c50..0080165 100644
--- a/src/conf/netdev_bandwidth_conf.h
+++ b/src/conf/netdev_bandwidth_conf.h
@@ -28,7 +28,8 @@
# include "buf.h"
# include "xml.h"
-virNetDevBandwidthPtr virNetDevBandwidthParse(xmlNodePtr node)
+virNetDevBandwidthPtr virNetDevBandwidthParse(xmlNodePtr node,
+ int net_type)
ATTRIBUTE_NONNULL(1) ATTRIBUTE_RETURN_CHECK;
int virNetDevBandwidthFormat(virNetDevBandwidthPtr def,
virBufferPtr buf)
diff --git a/src/conf/network_conf.c b/src/conf/network_conf.c
index 228951d..41831e0 100644
--- a/src/conf/network_conf.c
+++ b/src/conf/network_conf.c
@@ -1186,7 +1186,7 @@ virNetworkPortGroupParseXML(virPortGroupDefPtr def,
bandwidth_node = virXPathNode("./bandwidth", ctxt);
if (bandwidth_node &&
- !(def->bandwidth = virNetDevBandwidthParse(bandwidth_node))) {
+ !(def->bandwidth = virNetDevBandwidthParse(bandwidth_node, -1))) {
goto error;
}
@@ -1262,7 +1262,7 @@ virNetworkDefParseXML(xmlXPathContextPtr ctxt)
def->domain = virXPathString("string(./domain[1]/@name)", ctxt);
if ((bandwidthNode = virXPathNode("./bandwidth", ctxt)) != NULL &&
- (def->bandwidth = virNetDevBandwidthParse(bandwidthNode)) == NULL)
+ (def->bandwidth = virNetDevBandwidthParse(bandwidthNode, -1)) == NULL)
goto error;
vlanNode = virXPathNode("./vlan", ctxt);
diff --git a/src/util/virnetdevbandwidth.h b/src/util/virnetdevbandwidth.h
index e046230..35f8b89 100644
--- a/src/util/virnetdevbandwidth.h
+++ b/src/util/virnetdevbandwidth.h
@@ -30,6 +30,7 @@ typedef virNetDevBandwidthRate *virNetDevBandwidthRatePtr;
struct _virNetDevBandwidthRate {
unsigned long long average; /* kbytes/s */
unsigned long long peak; /* kbytes/s */
+ unsigned long long floor; /* kbytes/s */
unsigned long long burst; /* kbytes */
};
--
1.7.8.6