[PULL 05/13] machine: remove 'query-cpus' QMP command

The newer 'query-cpus-fast' command avoids side effects on the guest execution. Note that some of the field names are different in the 'query-cpus-fast' command. Reviewed-by: Wainer dos Santos Moschetta <wainersm(a)redhat.com&gt; Tested-by: Wainer dos Santos Moschetta <wainersm(a)redhat.com&gt; Signed-off-by: Daniel P. Berrangé <berrange(a)redhat.com&gt; --- docs/system/deprecated.rst | 5 - docs/system/removed-features.rst | 5 + hw/core/machine-hmp-cmds.c | 8 +- hw/core/machine-qmp-cmds.c | 79 ---------- qapi/machine.json | 161 +-------------------- tests/acceptance/pc_cpu_hotplug_props.py | 2 +- tests/acceptance/x86_cpu_model_versions.py | 2 +- tests/migration/guestperf/engine.py | 2 +- tests/qtest/numa-test.c | 6 +- tests/qtest/qmp-test.c | 6 +- tests/qtest/test-x86-cpuid-compat.c | 4 +- 11 files changed, 22 insertions(+), 258 deletions(-) diff --git a/docs/system/deprecated.rst b/docs/system/deprecated.rst index e68f80d0c8..fd377353f6 100644 --- a/docs/system/deprecated.rst +++ b/docs/system/deprecated.rst @@ -229,11 +229,6 @@ Since the ``dirty-bitmaps`` field is optionally present in both the old and new locations, clients must use introspection to learn where to anticipate the field if/when it does appear in command output. -``query-cpus`` (since 2.12.0) -''''''''''''''''''''''''''''' - -The ``query-cpus`` command is replaced by the ``query-cpus-fast`` command. - ``query-cpus-fast`` ``arch`` output member (since 3.0.0) '''''''''''''''''''''''''''''''''''''''''''''''''''''''' diff --git a/docs/system/removed-features.rst b/docs/system/removed-features.rst index 6e653bfc4e..37946e2401 100644 --- a/docs/system/removed-features.rst +++ b/docs/system/removed-features.rst @@ -86,6 +86,11 @@ Use ``migrate_set_parameter`` and ``info migrate_parameters`` instead. Use ``migrate_set_parameter`` instead. +``query-cpus`` (removed in 6.0) +''''''''''''''''''''''''''''''' + +The ``query-cpus`` command is replaced by the ``query-cpus-fast`` command. + Human Monitor Protocol (HMP) commands ------------------------------------- diff --git a/hw/core/machine-hmp-cmds.c b/hw/core/machine-hmp-cmds.c index 6357be9c6b..58248cffa3 100644 --- a/hw/core/machine-hmp-cmds.c +++ b/hw/core/machine-hmp-cmds.c @@ -130,7 +130,7 @@ void hmp_info_numa(Monitor *mon, const QDict *qdict) { int i, nb_numa_nodes; NumaNodeMem *node_mem; - CpuInfoList *cpu_list, *cpu; + CpuInfoFastList *cpu_list, *cpu; MachineState *ms = MACHINE(qdev_get_machine()); nb_numa_nodes = ms->numa_state ? ms->numa_state->num_nodes : 0; @@ -139,7 +139,7 @@ void hmp_info_numa(Monitor *mon, const QDict *qdict) return; } - cpu_list = qmp_query_cpus(&error_abort); + cpu_list = qmp_query_cpus_fast(&error_abort); node_mem = g_new0(NumaNodeMem, nb_numa_nodes); query_numa_node_mem(node_mem, ms); @@ -148,7 +148,7 @@ void hmp_info_numa(Monitor *mon, const QDict *qdict) for (cpu = cpu_list; cpu; cpu = cpu->next) { if (cpu->value->has_props && cpu->value->props->has_node_id && cpu->value->props->node_id == i) { - monitor_printf(mon, " %" PRIi64, cpu->value->CPU); + monitor_printf(mon, " %" PRIi64, cpu->value->cpu_index); } } monitor_printf(mon, "\n"); @@ -157,6 +157,6 @@ void hmp_info_numa(Monitor *mon, const QDict *qdict) monitor_printf(mon, "node %d plugged: %" PRId64 " MB\n", i, node_mem[i].node_plugged_mem >> 20); } - qapi_free_CpuInfoList(cpu_list); + qapi_free_CpuInfoFastList(cpu_list); g_free(node_mem); } diff --git a/hw/core/machine-qmp-cmds.c b/hw/core/machine-qmp-cmds.c index 44e979e503..af60cd969d 100644 --- a/hw/core/machine-qmp-cmds.c +++ b/hw/core/machine-qmp-cmds.c @@ -24,85 +24,6 @@ #include "sysemu/runstate.h" #include "sysemu/sysemu.h" -CpuInfoList *qmp_query_cpus(Error **errp) -{ - MachineState *ms = MACHINE(qdev_get_machine()); - MachineClass *mc = MACHINE_GET_CLASS(ms); - CpuInfoList *head = NULL, **tail = &head; - CPUState *cpu; - - CPU_FOREACH(cpu) { - CpuInfo *value; -#if defined(TARGET_I386) - X86CPU *x86_cpu = X86_CPU(cpu); - CPUX86State *env = &x86_cpu->env; -#elif defined(TARGET_PPC) - PowerPCCPU *ppc_cpu = POWERPC_CPU(cpu); - CPUPPCState *env = &ppc_cpu->env; -#elif defined(TARGET_SPARC) - SPARCCPU *sparc_cpu = SPARC_CPU(cpu); - CPUSPARCState *env = &sparc_cpu->env; -#elif defined(TARGET_RISCV) - RISCVCPU *riscv_cpu = RISCV_CPU(cpu); - CPURISCVState *env = &riscv_cpu->env; -#elif defined(TARGET_MIPS) - MIPSCPU *mips_cpu = MIPS_CPU(cpu); - CPUMIPSState *env = &mips_cpu->env; -#elif defined(TARGET_TRICORE) - TriCoreCPU *tricore_cpu = TRICORE_CPU(cpu); - CPUTriCoreState *env = &tricore_cpu->env; -#elif defined(TARGET_S390X) - S390CPU *s390_cpu = S390_CPU(cpu); - CPUS390XState *env = &s390_cpu->env; -#endif - - cpu_synchronize_state(cpu); - - value = g_malloc0(sizeof(*value)); - value->CPU = cpu->cpu_index; - value->current = (cpu == first_cpu); - value->halted = cpu->halted; - value->qom_path = object_get_canonical_path(OBJECT(cpu)); - value->thread_id = cpu->thread_id; -#if defined(TARGET_I386) - value->arch = CPU_INFO_ARCH_X86; - value->u.x86.pc = env->eip + env->segs[R_CS].base; -#elif defined(TARGET_PPC) - value->arch = CPU_INFO_ARCH_PPC; - value->u.ppc.nip = env->nip; -#elif defined(TARGET_SPARC) - value->arch = CPU_INFO_ARCH_SPARC; - value->u.q_sparc.pc = env->pc; - value->u.q_sparc.npc = env->npc; -#elif defined(TARGET_MIPS) - value->arch = CPU_INFO_ARCH_MIPS; - value->u.q_mips.PC = env->active_tc.PC; -#elif defined(TARGET_TRICORE) - value->arch = CPU_INFO_ARCH_TRICORE; - value->u.tricore.PC = env->PC; -#elif defined(TARGET_S390X) - value->arch = CPU_INFO_ARCH_S390; - value->u.s390.cpu_state = env->cpu_state; -#elif defined(TARGET_RISCV) - value->arch = CPU_INFO_ARCH_RISCV; - value->u.riscv.pc = env->pc; -#else - value->arch = CPU_INFO_ARCH_OTHER; -#endif - value->has_props = !!mc->cpu_index_to_instance_props; - if (value->has_props) { - CpuInstanceProperties *props; - props = g_malloc0(sizeof(*props)); - *props = mc->cpu_index_to_instance_props(ms, cpu->cpu_index); - value->props = props; - } - - QAPI_LIST_APPEND(tail, value); - } - - return head; -} - static CpuInfoArch sysemu_target_to_cpuinfo_arch(SysEmuTarget target) { /* diff --git a/qapi/machine.json b/qapi/machine.json index 330189efe3..9811927504 100644 --- a/qapi/machine.json +++ b/qapi/machine.json @@ -38,7 +38,7 @@ # @CpuInfoArch: # # An enumeration of cpu types that enable additional information during -# @query-cpus and @query-cpus-fast. +# @query-cpus-fast. # # @s390: since 2.12 # @@ -49,114 +49,6 @@ { 'enum': 'CpuInfoArch', 'data': ['x86', 'sparc', 'ppc', 'mips', 'tricore', 's390', 'riscv', 'other' ] } -## -# @CpuInfo: -# -# Information about a virtual CPU -# -# @CPU: the index of the virtual CPU -# -# @current: this only exists for backwards compatibility and should be ignored -# -# @halted: true if the virtual CPU is in the halt state. Halt usually refers -# to a processor specific low power mode. -# -# @qom_path: path to the CPU object in the QOM tree (since 2.4) -# -# @thread_id: ID of the underlying host thread -# -# @props: properties describing to which node/socket/core/thread -# virtual CPU belongs to, provided if supported by board (since 2.10) -# -# @arch: architecture of the cpu, which determines which additional fields -# will be listed (since 2.6) -# -# Since: 0.14 -# -# Notes: @halted is a transient state that changes frequently. By the time the -# data is sent to the client, the guest may no longer be halted. -## -{ 'union': 'CpuInfo', - 'base': {'CPU': 'int', 'current': 'bool', 'halted': 'bool', - 'qom_path': 'str', 'thread_id': 'int', - '*props': 'CpuInstanceProperties', 'arch': 'CpuInfoArch' }, - 'discriminator': 'arch', - 'data': { 'x86': 'CpuInfoX86', - 'sparc': 'CpuInfoSPARC', - 'ppc': 'CpuInfoPPC', - 'mips': 'CpuInfoMIPS', - 'tricore': 'CpuInfoTricore', - 's390': 'CpuInfoS390', - 'riscv': 'CpuInfoRISCV' } } - -## -# @CpuInfoX86: -# -# Additional information about a virtual i386 or x86_64 CPU -# -# @pc: the 64-bit instruction pointer -# -# Since: 2.6 -## -{ 'struct': 'CpuInfoX86', 'data': { 'pc': 'int' } } - -## -# @CpuInfoSPARC: -# -# Additional information about a virtual SPARC CPU -# -# @pc: the PC component of the instruction pointer -# -# @npc: the NPC component of the instruction pointer -# -# Since: 2.6 -## -{ 'struct': 'CpuInfoSPARC', 'data': { 'pc': 'int', 'npc': 'int' } } - -## -# @CpuInfoPPC: -# -# Additional information about a virtual PPC CPU -# -# @nip: the instruction pointer -# -# Since: 2.6 -## -{ 'struct': 'CpuInfoPPC', 'data': { 'nip': 'int' } } - -## -# @CpuInfoMIPS: -# -# Additional information about a virtual MIPS CPU -# -# @PC: the instruction pointer -# -# Since: 2.6 -## -{ 'struct': 'CpuInfoMIPS', 'data': { 'PC': 'int' } } - -## -# @CpuInfoTricore: -# -# Additional information about a virtual Tricore CPU -# -# @PC: the instruction pointer -# -# Since: 2.6 -## -{ 'struct': 'CpuInfoTricore', 'data': { 'PC': 'int' } } - -## -# @CpuInfoRISCV: -# -# Additional information about a virtual RISCV CPU -# -# @pc: the instruction pointer -# -# Since 2.12 -## -{ 'struct': 'CpuInfoRISCV', 'data': { 'pc': 'int' } } - ## # @CpuS390State: # @@ -180,53 +72,6 @@ ## { 'struct': 'CpuInfoS390', 'data': { 'cpu-state': 'CpuS390State' } } -## -# @query-cpus: -# -# Returns a list of information about each virtual CPU. -# -# This command causes vCPU threads to exit to userspace, which causes -# a small interruption to guest CPU execution. This will have a negative -# impact on realtime guests and other latency sensitive guest workloads. -# -# Features: -# @deprecated: This command is deprecated, because it interferes with -# the guest. Use 'query-cpus-fast' instead to avoid the vCPU -# interruption. -# -# Returns: a list of @CpuInfo for each virtual CPU -# -# Since: 0.14 -# -# Example: -# -# -> { "execute": "query-cpus" } -# <- { "return": [ -# { -# "CPU":0, -# "current":true, -# "halted":false, -# "qom_path":"/machine/unattached/device[0]", -# "arch":"x86", -# "pc":3227107138, -# "thread_id":3134 -# }, -# { -# "CPU":1, -# "current":false, -# "halted":true, -# "qom_path":"/machine/unattached/device[2]", -# "arch":"x86", -# "pc":7108165, -# "thread_id":3135 -# } -# ] -# } -# -## -{ 'command': 'query-cpus', 'returns': ['CpuInfo'], - 'features': [ 'deprecated' ] } - ## # @CpuInfoFast: # @@ -266,9 +111,7 @@ ## # @query-cpus-fast: # -# Returns information about all virtual CPUs. This command does not -# incur a performance penalty and should be used in production -# instead of query-cpus. +# Returns information about all virtual CPUs. # # Returns: list of @CpuInfoFast # diff --git a/tests/acceptance/pc_cpu_hotplug_props.py b/tests/acceptance/pc_cpu_hotplug_props.py index e49bf33fc5..f48f68fc6b 100644 --- a/tests/acceptance/pc_cpu_hotplug_props.py +++ b/tests/acceptance/pc_cpu_hotplug_props.py @@ -32,4 +32,4 @@ def test_no_die_id(self): self.vm.add_args('-cpu', 'qemu64') self.vm.add_args('-device', 'qemu64-x86_64-cpu,socket-id=1,core-id=0,thread-id=0') self.vm.launch() - self.assertEquals(len(self.vm.command('query-cpus')), 2) + self.assertEquals(len(self.vm.command('query-cpus-fast')), 2) diff --git a/tests/acceptance/x86_cpu_model_versions.py b/tests/acceptance/x86_cpu_model_versions.py index 2b7461bb41..77ed8597a4 100644 --- a/tests/acceptance/x86_cpu_model_versions.py +++ b/tests/acceptance/x86_cpu_model_versions.py @@ -246,7 +246,7 @@ class CascadelakeArchCapabilities(avocado_qemu.Test): :avocado: tags=arch:x86_64 """ def get_cpu_prop(self, prop): - cpu_path = self.vm.command('query-cpus')[0].get('qom_path') + cpu_path = self.vm.command('query-cpus-fast')[0].get('qom-path') return self.vm.command('qom-get', path=cpu_path, property=prop) def test_4_1(self): diff --git a/tests/migration/guestperf/engine.py b/tests/migration/guestperf/engine.py index 5161e4ff81..5c965140f8 100644 --- a/tests/migration/guestperf/engine.py +++ b/tests/migration/guestperf/engine.py @@ -110,7 +110,7 @@ def _migrate(self, hardware, scenario, src, dst, connect_uri): src_vcpu_time = [] src_pid = src.get_pid() - vcpus = src.command("query-cpus") + vcpus = src.command("query-cpus-fast") src_threads = [] for vcpu in vcpus: src_threads.append(vcpu["thread_id"]) diff --git a/tests/qtest/numa-test.c b/tests/qtest/numa-test.c index b25ebf97d8..dc0ec571ca 100644 --- a/tests/qtest/numa-test.c +++ b/tests/qtest/numa-test.c @@ -72,7 +72,7 @@ static void test_mon_partial(const void *data) static QList *get_cpus(QTestState *qts, QDict **resp) { - *resp = qtest_qmp(qts, "{ 'execute': 'query-cpus' }"); + *resp = qtest_qmp(qts, "{ 'execute': 'query-cpus-fast' }"); g_assert(*resp); g_assert(qdict_haskey(*resp, "return")); return qdict_get_qlist(*resp, "return"); @@ -97,10 +97,10 @@ static void test_query_cpus(const void *data) int64_t cpu_idx, node; cpu = qobject_to(QDict, e); - g_assert(qdict_haskey(cpu, "CPU")); + g_assert(qdict_haskey(cpu, "cpu-index")); g_assert(qdict_haskey(cpu, "props")); - cpu_idx = qdict_get_int(cpu, "CPU"); + cpu_idx = qdict_get_int(cpu, "cpu-index"); props = qdict_get_qdict(cpu, "props"); g_assert(qdict_haskey(props, "node-id")); node = qdict_get_int(props, "node-id"); diff --git a/tests/qtest/qmp-test.c b/tests/qtest/qmp-test.c index 11614bf63f..cd27fae3de 100644 --- a/tests/qtest/qmp-test.c +++ b/tests/qtest/qmp-test.c @@ -252,7 +252,7 @@ static void test_qmp_oob(void) * Try any command that does not support OOB but with OOB flag. We * should get failure. */ - resp = qtest_qmp(qts, "{ 'exec-oob': 'query-cpus' }"); + resp = qtest_qmp(qts, "{ 'exec-oob': 'query-cpus-fast' }"); g_assert(qdict_haskey(resp, "error")); qobject_unref(resp); @@ -289,7 +289,7 @@ static void test_qmp_preconfig(void) g_assert(!qmp_rsp_is_err(qtest_qmp(qs, "{ 'execute': 'query-commands' }"))); /* forbidden commands, expected error */ - g_assert(qmp_rsp_is_err(qtest_qmp(qs, "{ 'execute': 'query-cpus' }"))); + g_assert(qmp_rsp_is_err(qtest_qmp(qs, "{ 'execute': 'query-cpus-fast' }"))); /* check that query-status returns preconfig state */ rsp = qtest_qmp(qs, "{ 'execute': 'query-status' }"); @@ -313,7 +313,7 @@ static void test_qmp_preconfig(void) g_assert(qmp_rsp_is_err(qtest_qmp(qs, "{ 'execute': 'x-exit-preconfig' }"))); /* enabled commands, no error expected */ - g_assert(!qmp_rsp_is_err(qtest_qmp(qs, "{ 'execute': 'query-cpus' }"))); + g_assert(!qmp_rsp_is_err(qtest_qmp(qs, "{ 'execute': 'query-cpus-fast' }"))); qtest_quit(qs); } diff --git a/tests/qtest/test-x86-cpuid-compat.c b/tests/qtest/test-x86-cpuid-compat.c index 6470f0a85d..f28848e06e 100644 --- a/tests/qtest/test-x86-cpuid-compat.c +++ b/tests/qtest/test-x86-cpuid-compat.c @@ -13,12 +13,12 @@ static char *get_cpu0_qom_path(void) QDict *cpu0; char *path; - resp = qmp("{'execute': 'query-cpus', 'arguments': {}}"); + resp = qmp("{'execute': 'query-cpus-fast', 'arguments': {}}"); g_assert(qdict_haskey(resp, "return")); ret = qdict_get_qlist(resp, "return"); cpu0 = qobject_to(QDict, qlist_peek(ret)); - path = g_strdup(qdict_get_str(cpu0, "qom_path")); + path = g_strdup(qdict_get_str(cpu0, "qom-path")); qobject_unref(resp); return path; } -- 2.30.2