8:51 a.m.
virDomainPCIAddressBusSetModel() is called for each PCI controller
when building an address set prior to assiging PCI addresses to
devices.
This patch adds a new argument, allowHotplug, to that function that
can be set to false if we know for certain that a particular
controller won't support hotplug
The most interesting case is in qemuDomainPCIAddressSetCreate(), where
the config of each existing controller is available while building the
address set, so we can appropriately set allowHotplug = false when the
user has "hotplug='off'" in the config of a controller that normally
would support hotplug. In all other cases, it is set to true or false
in accordance with the capability of the controller model.
So far we aren't doing anything with this bus flag in the address set.
Signed-off-by: Laine Stump <laine(a)redhat.com>
---
src/conf/domain_addr.c | 31 +++++++++++++++++++++----------
src/conf/domain_addr.h | 3 ++-
src/qemu/qemu_domain_address.c | 10 +++++++---
3 files changed, 30 insertions(+), 14 deletions(-)
diff --git a/src/conf/domain_addr.c b/src/conf/domain_addr.c
index 429550e970..b58989ac8b 100644
--- a/src/conf/domain_addr.c
+++ b/src/conf/domain_addr.c
@@ -495,31 +495,40 @@ virDomainPCIAddressValidate(virDomainPCIAddressSetPtr addrs,
int
virDomainPCIAddressBusSetModel(virDomainPCIAddressBusPtr bus,
- virDomainControllerModelPCI model)
+ virDomainControllerModelPCI model,
+ bool allowHotplug)
{
/* set flags for what can be connected *downstream* from each
* bus.
*/
+ virDomainPCIConnectFlags hotplugFlag = 0;
+
+ if (allowHotplug)
+ hotplugFlag = VIR_PCI_CONNECT_HOTPLUGGABLE;
+
switch (model) {
case VIR_DOMAIN_CONTROLLER_MODEL_PCI_ROOT:
bus->flags = (VIR_PCI_CONNECT_AUTOASSIGN |
VIR_PCI_CONNECT_TYPE_PCI_DEVICE |
VIR_PCI_CONNECT_TYPE_PCI_BRIDGE |
- VIR_PCI_CONNECT_TYPE_PCI_EXPANDER_BUS);
+ VIR_PCI_CONNECT_TYPE_PCI_EXPANDER_BUS |
+ hotplugFlag);
bus->minSlot = 1;
bus->maxSlot = VIR_PCI_ADDRESS_SLOT_LAST;
break;
case VIR_DOMAIN_CONTROLLER_MODEL_PCI_BRIDGE:
bus->flags = (VIR_PCI_CONNECT_AUTOASSIGN |
VIR_PCI_CONNECT_TYPE_PCI_DEVICE |
- VIR_PCI_CONNECT_TYPE_PCI_BRIDGE);
+ VIR_PCI_CONNECT_TYPE_PCI_BRIDGE |
+ hotplugFlag);
bus->minSlot = 1;
bus->maxSlot = VIR_PCI_ADDRESS_SLOT_LAST;
break;
case VIR_DOMAIN_CONTROLLER_MODEL_PCI_EXPANDER_BUS:
bus->flags = (VIR_PCI_CONNECT_AUTOASSIGN |
VIR_PCI_CONNECT_TYPE_PCI_DEVICE |
- VIR_PCI_CONNECT_TYPE_PCI_BRIDGE);
+ VIR_PCI_CONNECT_TYPE_PCI_BRIDGE |
+ hotplugFlag);
bus->minSlot = 0;
bus->maxSlot = VIR_PCI_ADDRESS_SLOT_LAST;
break;
@@ -550,7 +559,8 @@ virDomainPCIAddressBusSetModel(virDomainPCIAddressBusPtr bus,
* the first of which is not usable because of the SHPC */
bus->flags = (VIR_PCI_CONNECT_AUTOASSIGN |
VIR_PCI_CONNECT_TYPE_PCI_DEVICE |
- VIR_PCI_CONNECT_TYPE_PCI_BRIDGE);
+ VIR_PCI_CONNECT_TYPE_PCI_BRIDGE |
+ hotplugFlag);
bus->minSlot = 1;
bus->maxSlot = VIR_PCI_ADDRESS_SLOT_LAST;
break;
@@ -562,7 +572,8 @@ virDomainPCIAddressBusSetModel(virDomainPCIAddressBusPtr bus,
bus->flags = (VIR_PCI_CONNECT_AUTOASSIGN |
VIR_PCI_CONNECT_TYPE_PCIE_DEVICE |
VIR_PCI_CONNECT_TYPE_PCIE_SWITCH_UPSTREAM_PORT |
- VIR_PCI_CONNECT_TYPE_PCIE_TO_PCI_BRIDGE);
+ VIR_PCI_CONNECT_TYPE_PCIE_TO_PCI_BRIDGE |
+ hotplugFlag);
bus->minSlot = 0;
bus->maxSlot = 0;
break;
@@ -759,7 +770,7 @@ virDomainPCIAddressSetGrow(virDomainPCIAddressSetPtr addrs,
* rest are of the requested type
*/
if (virDomainPCIAddressBusSetModel(&addrs->buses[i++],
- VIR_DOMAIN_CONTROLLER_MODEL_DMI_TO_PCI_BRIDGE)
< 0) {
+ VIR_DOMAIN_CONTROLLER_MODEL_DMI_TO_PCI_BRIDGE,
false) < 0) {
return -1;
}
}
@@ -776,20 +787,20 @@ virDomainPCIAddressSetGrow(virDomainPCIAddressSetPtr addrs,
* will be allocated for the dummy PCIe device later on.
*/
if (virDomainPCIAddressBusSetModel(&addrs->buses[i],
- VIR_DOMAIN_CONTROLLER_MODEL_PCIE_ROOT_PORT)
< 0) {
+ VIR_DOMAIN_CONTROLLER_MODEL_PCIE_ROOT_PORT,
true) < 0) {
return -1;
}
addrs->buses[i].flags = VIR_PCI_CONNECT_TYPE_PCIE_TO_PCI_BRIDGE;
i++;
if (virDomainPCIAddressBusSetModel(&addrs->buses[i++],
-
VIR_DOMAIN_CONTROLLER_MODEL_PCIE_TO_PCI_BRIDGE) < 0) {
+
VIR_DOMAIN_CONTROLLER_MODEL_PCIE_TO_PCI_BRIDGE, true) < 0) {
return -1;
}
}
for (; i < addrs->nbuses; i++) {
- if (virDomainPCIAddressBusSetModel(&addrs->buses[i], model) < 0)
+ if (virDomainPCIAddressBusSetModel(&addrs->buses[i], model, true) < 0)
return -1;
}
diff --git a/src/conf/domain_addr.h b/src/conf/domain_addr.h
index 40738ddb72..c1363c1490 100644
--- a/src/conf/domain_addr.h
+++ b/src/conf/domain_addr.h
@@ -148,7 +148,8 @@ bool virDomainPCIAddressValidate(virDomainPCIAddressSetPtr addrs,
int virDomainPCIAddressBusSetModel(virDomainPCIAddressBusPtr bus,
- virDomainControllerModelPCI model)
+ virDomainControllerModelPCI model,
+ bool allowHotplug)
ATTRIBUTE_NONNULL(1);
bool virDomainPCIAddressBusIsFullyReserved(virDomainPCIAddressBusPtr bus)
diff --git a/src/qemu/qemu_domain_address.c b/src/qemu/qemu_domain_address.c
index f853d2003d..07431343ed 100644
--- a/src/qemu/qemu_domain_address.c
+++ b/src/qemu/qemu_domain_address.c
@@ -1652,6 +1652,7 @@ qemuDomainPCIAddressSetCreate(virDomainDefPtr def,
for (i = 0; i < def->ncontrollers; i++) {
virDomainControllerDefPtr cont = def->controllers[i];
size_t idx = cont->idx;
+ bool allowHotplug = false;
if (cont->type != VIR_DOMAIN_CONTROLLER_TYPE_PCI)
continue;
@@ -1663,7 +1664,10 @@ qemuDomainPCIAddressSetCreate(virDomainDefPtr def,
goto error;
}
- if (virDomainPCIAddressBusSetModel(&addrs->buses[idx], cont->model)
< 0)
+ if (cont->opts.pciopts.hotplug != VIR_TRISTATE_SWITCH_OFF)
+ allowHotplug = true;
+
+ if (virDomainPCIAddressBusSetModel(&addrs->buses[idx], cont->model,
allowHotplug) < 0)
goto error;
/* Forward the information about isolation groups */
@@ -1681,7 +1685,7 @@ qemuDomainPCIAddressSetCreate(virDomainDefPtr def,
* assigning addresses to devices.
*/
if (virDomainPCIAddressBusSetModel(&addrs->buses[0],
- VIR_DOMAIN_CONTROLLER_MODEL_PCI_ROOT) < 0)
+ VIR_DOMAIN_CONTROLLER_MODEL_PCI_ROOT, true)
< 0)
goto error;
}
@@ -1703,7 +1707,7 @@ qemuDomainPCIAddressSetCreate(virDomainDefPtr def,
if (addrs->buses[i].model)
continue;
- if (virDomainPCIAddressBusSetModel(&addrs->buses[i], defaultModel) <
0)
+ if (virDomainPCIAddressBusSetModel(&addrs->buses[i], defaultModel, true)
< 0)
goto error;
VIR_DEBUG("Auto-adding <controller type='pci' model='%s'
index='%zu'/>",
--
2.25.2