9 a.m.
Hi everyone,
After I updated my libvirt repo/install from latest git master
yesterday, libvirtd won't just launch for me anymore. The error in log
was:
2012-06-13 11:59:47.427+0000: 30501: error : virStateInitialize:781 :
Initialization of NWFilter state driver failed
2012-06-13 11:59:48.601+0000: 30501: error : daemonRunStateInit:752 :
Driver state initialization failed
Daniel asked me to enable more debug to find the cause and here is the
output: http://static.fi/~zeenix/tmp/libvirt.out
Does anyone know whats going on and how can I fix this? In the
meantime I'll try to see reverting to some older commit helps and if
so, I'll do a git bisect..
--
Regards,
Zeeshan Ali (Khattak)
FSF member#5124
6:06 p.m.
On Wed, Jun 13, 2012 at 5:00 PM, Zeeshan Ali (Khattak)
<zeeshanak(a)gnome.org> wrote:
Hi everyone,
After I updated my libvirt repo/install from latest git master
yesterday, libvirtd won't just launch for me anymore. The error in log
was:
2012-06-13 11:59:47.427+0000: 30501: error : virStateInitialize:781 :
Initialization of NWFilter state driver failed
2012-06-13 11:59:48.601+0000: 30501: error : daemonRunStateInit:752 :
Driver state initialization failed
Daniel asked me to enable more debug to find the cause and here is the
output: http://static.fi/~zeenix/tmp/libvirt.out
Does anyone know whats going on and how can I fix this? In the
meantime I'll try to see reverting to some older commit helps and if
so, I'll do a git bisect..
Took me a while to get the script to use with `git bisect run` working
but finally I found the first bad commit:
commit cec281fcaace7e23c51a2da4659623afe7fd9ebb
Author: Stefan Berger <stefanb(a)linux.vnet.ibm.com>
Date: Fri Jun 1 19:32:06 2012 -0400
nwfilter: add DHCP snooping
This patch adds DHCP snooping support to libvirt. The learning method for
IP addresses is specified by setting the "CTRL_IP_LEARNING"
variable to one of
"any" [default] (existing IP learning code), "none" (static only
addresses)
or "dhcp" (DHCP snooping).
Active leases are saved in a lease file and reloaded on restart or HUP.
The following interface XML activates and uses the DHCP snooping:
<interface type='bridge'>
<source bridge='virbr0'/>
<filterref filter='clean-traffic'>
<parameter name='CTRL_IP_LEARNING' value='dhcp'/>
</filterref>
</interface>
All filters containing the variable 'IP' are automatically adjusted when
the VM receives an IP address via DHCP. However, multiple IP addresses per
interface are silently ignored in this patch, thus only supporting one IP
address per interface. Multiple IP address support is added in a later
patch in this series.
Signed-off-by: David L Stevens <dlstevens(a)us.ibm.com>
Signed-off-by: Stefan Berger <stefanb(a)linux.vnet.ibm.com>
Attaching the script I used with `git bisect run` for anyone who can
reproduce the issue.
--
Regards,
Zeeshan Ali (Khattak)
FSF member#5124
4:19 a.m.
On Fri, Jun 15, 2012 at 02:06:21AM +0300, Zeeshan Ali (Khattak) wrote:
On Wed, Jun 13, 2012 at 5:00 PM, Zeeshan Ali (Khattak)
<zeeshanak(a)gnome.org> wrote:
> Hi everyone,
> After I updated my libvirt repo/install from latest git master
> yesterday, libvirtd won't just launch for me anymore. The error in log
> was:
>
> 2012-06-13 11:59:47.427+0000: 30501: error : virStateInitialize:781 :
> Initialization of NWFilter state driver failed
> 2012-06-13 11:59:48.601+0000: 30501: error : daemonRunStateInit:752 :
> Driver state initialization failed
>
> Daniel asked me to enable more debug to find the cause and here is the
> output: http://static.fi/~zeenix/tmp/libvirt.out
>
> Does anyone know whats going on and how can I fix this? In the
> meantime I'll try to see reverting to some older commit helps and if
> so, I'll do a git bisect..
Took me a while to get the script to use with `git bisect run` working
but finally I found the first bad commit:
See https://www.redhat.com/archives/libvir-list/2012-June/msg00603.html for
a possible workaround:
"try to install libpcap-devel RPM and rebuild libvirt."
Christophe
10:52 a.m.
On 06/15/2012 03:19 AM, Christophe Fergeau wrote:
> Took me a while to get the script to use with `git bisect run`
working
> but finally I found the first bad commit:
See https://www.redhat.com/archives/libvir-list/2012-June/msg00603.html for
a possible workaround:
"try to install libpcap-devel RPM and rebuild libvirt."
Now fixed:
https://www.redhat.com/archives/libvir-list/2012-June/msg00626.html
--
Eric Blake eblake(a)redhat.com +1-919-301-3266
Libvirt virtualization library http://libvirt.org
4545
days inactive
4547
days old
3 comments
3 participants
participants (3)
-
Christophe Fergeau -
Eric Blake -
Zeeshan Ali (Khattak)