8:03 a.m.
src/libvirt.c: Statement of required hypervisor privileges was
probably edited after writing and word "may" was left in
a confusing place.
---
src/libvirt.c | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/src/libvirt.c b/src/libvirt.c
index 941cb47..78f303d 100644
--- a/src/libvirt.c
+++ b/src/libvirt.c
@@ -3269,7 +3269,7 @@ error:
* Dynamically change the target amount of physical memory allocated to a
* domain. If domain is NULL, then this change the amount of memory reserved
* to Domain0 i.e. the domain where the application runs.
- * This function may requires privileged access to the hypervisor.
+ * This function requires privileged access to the hypervisor.
*
* @flags may include VIR_DOMAIN_AFFECT_LIVE or VIR_DOMAIN_AFFECT_CONFIG.
* Both flags may be set. If VIR_DOMAIN_AFFECT_LIVE is set, the change affects
--
1.7.6
8:50 a.m.
On Tue, Aug 02, 2011 at 03:03:38PM +0200, Peter Krempa wrote:
src/libvirt.c: Statement of required hypervisor privileges was
probably edited after writing and word "may" was left in
a confusing place.
---
src/libvirt.c | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/src/libvirt.c b/src/libvirt.c
index 941cb47..78f303d 100644
--- a/src/libvirt.c
+++ b/src/libvirt.c
@@ -3269,7 +3269,7 @@ error:
* Dynamically change the target amount of physical memory allocated to a
* domain. If domain is NULL, then this change the amount of memory reserved
* to Domain0 i.e. the domain where the application runs.
- * This function may requires privileged access to the hypervisor.
+ * This function requires privileged access to the hypervisor.
*
* @flags may include VIR_DOMAIN_AFFECT_LIVE or VIR_DOMAIN_AFFECT_CONFIG.
* Both flags may be set. If VIR_DOMAIN_AFFECT_LIVE is set, the change affects
Hum, no, well there is a superfluous 's' but it's right
" * This function may require privileged access to the hypervisor."
Daniel
--
Daniel Veillard | libxml Gnome XML XSLT toolkit http://xmlsoft.org/
daniel(a)veillard.com | Rpmfind RPM search engine http://rpmfind.net/
http://veillard.com/ | virtualization library http://libvirt.org/
8:57 a.m.
On 08/02/2011 07:03 AM, Peter Krempa wrote:
src/libvirt.c: Statement of required hypervisor privileges was
probably edited after writing and word "may" was left in
a confusing place.
---
src/libvirt.c | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/src/libvirt.c b/src/libvirt.c
index 941cb47..78f303d 100644
--- a/src/libvirt.c
+++ b/src/libvirt.c
@@ -3269,7 +3269,7 @@ error:
* Dynamically change the target amount of physical memory allocated to a
* domain. If domain is NULL, then this change the amount of memory reserved
* to Domain0 i.e. the domain where the application runs.
- * This function may requires privileged access to the hypervisor.
+ * This function requires privileged access to the hypervisor.
Actually, I'd rather go with 'may require' than 'requires'. And there
are multiple culprits, not just this one line.
How about this patch instead?
diff --git c/src/libvirt.c w/src/libvirt.c
index 941cb47..c154c7d 100644
--- c/src/libvirt.c
+++ w/src/libvirt.c
@@ -1789,7 +1789,7 @@ virDomainGetConnect (virDomainPtr dom)
*
* Launch a new guest domain, based on an XML description similar
* to the one returned by virDomainGetXMLDesc()
- * This function may requires privileged access to the hypervisor.
+ * This function may require privileged access to the hypervisor.
* The domain is not persistent, so its definition will disappear when it
* is destroyed, or if the host is restarted (see virDomainDefineXML() to
* define persistent domains).
@@ -2198,7 +2198,7 @@ virDomainRef(virDomainPtr domain)
* to CPU resources and I/O but the memory used by the domain at the
* hypervisor level will stay allocated. Use virDomainResume() to
reactivate
* the domain.
- * This function may requires privileged access.
+ * This function may require privileged access.
*
* Returns 0 in case of success and -1 in case of failure.
*/
@@ -2244,7 +2244,7 @@ error:
*
* Resume a suspended domain, the process is restarted from the state
where
* it was frozen by calling virSuspendDomain().
- * This function may requires privileged access
+ * This function may require privileged access
*
* Returns 0 in case of success and -1 in case of failure.
*/
@@ -3158,7 +3158,7 @@ error:
* Dynamically change the maximum amount of physical memory allocated to a
* domain. If domain is NULL, then this change the amount of memory
reserved
* to Domain0 i.e. the domain where the application runs.
- * This function requires privileged access to the hypervisor.
+ * This function may require privileged access to the hypervisor.
*
* This command is hypervisor-specific for whether active, persistent,
* or both configurations are changed; for more control, use
@@ -3213,7 +3213,7 @@ error:
* Dynamically change the target amount of physical memory allocated to a
* domain. If domain is NULL, then this change the amount of memory
reserved
* to Domain0 i.e. the domain where the application runs.
- * This function may requires privileged access to the hypervisor.
+ * This function may require privileged access to the hypervisor.
*
* This command only changes the runtime configuration of the domain,
* so can only be called on an active domain.
@@ -3269,7 +3269,7 @@ error:
* Dynamically change the target amount of physical memory allocated to a
* domain. If domain is NULL, then this change the amount of memory
reserved
* to Domain0 i.e. the domain where the application runs.
- * This function may requires privileged access to the hypervisor.
+ * This function may require privileged access to the hypervisor.
*
* @flags may include VIR_DOMAIN_AFFECT_LIVE or VIR_DOMAIN_AFFECT_CONFIG.
* Both flags may be set. If VIR_DOMAIN_AFFECT_LIVE is set, the change
affects
@@ -3338,7 +3338,7 @@ error:
* @flags: bitwise-OR of virDomainModificationImpact
*
* Change all or a subset of the memory tunables.
- * This function requires privileged access to the hypervisor.
+ * This function may require privileged access to the hypervisor.
*
* Returns -1 in case of error, 0 in case of success.
*/
@@ -3412,7 +3412,7 @@ error:
* goto error;
* }
*
- * This function requires privileged access to the hypervisor. This
function
+ * This function may require privileged access to the hypervisor. This
function
* expects the caller to allocate the @params.
*
* Returns -1 in case of error, 0 in case of success.
@@ -3464,7 +3464,7 @@ error:
* @flags: an OR'ed set of virDomainModificationImpact
*
* Change all or a subset of the blkio tunables.
- * This function requires privileged access to the hypervisor.
+ * This function may require privileged access to the hypervisor.
*
* Returns -1 in case of error, 0 in case of success.
*/
@@ -3522,7 +3522,7 @@ error:
* equal to the number of parameters suggested by @nparams.
* See virDomainGetMemoryParameters for an equivalent usage example.
*
- * This function requires privileged access to the hypervisor. This
function
+ * This function may require privileged access to the hypervisor. This
function
* expects the caller to allocate the @params.
*
* Returns -1 in case of error, 0 in case of success.
@@ -7293,7 +7293,7 @@ error:
* Dynamically change the number of virtual CPUs used by the domain.
* Note that this call may fail if the underlying virtualization
hypervisor
* does not support it or if growing the number is arbitrary limited.
- * This function requires privileged access to the hypervisor.
+ * This function may require privileged access to the hypervisor.
*
* This command only changes the runtime configuration of the domain,
* so can only be called on an active domain. It is hypervisor-dependent
@@ -7352,7 +7352,7 @@ error:
* Dynamically change the number of virtual CPUs used by the domain.
* Note that this call may fail if the underlying virtualization
hypervisor
* does not support it or if growing the number is arbitrary limited.
- * This function requires privileged access to the hypervisor.
+ * This function may require privileged access to the hypervisor.
*
* @flags may include VIR_DOMAIN_AFFECT_LIVE to affect a running
* domain (which may fail if domain is not active), or
@@ -7423,7 +7423,7 @@ error:
*
* Query the number of virtual CPUs used by the domain. Note that
* this call may fail if the underlying virtualization hypervisor does
- * not support it. This function requires privileged access to the
+ * not support it. This function may require privileged access to the
* hypervisor.
*
* If @flags includes VIR_DOMAIN_AFFECT_LIVE, this will query a
@@ -7492,7 +7492,7 @@ error:
* If maplen > size, failure code is returned.
*
* Dynamically change the real CPUs which can be allocated to a
virtual CPU.
- * This function requires privileged access to the hypervisor.
+ * This function may require privileged access to the hypervisor.
*
* This command only changes the runtime configuration of the domain,
* so can only be called on an active domain.
@@ -7557,7 +7557,7 @@ error:
* @flags: bitwise-OR of virDomainModificationImpac
*
* Dynamically change the real CPUs which can be allocated to a
virtual CPU.
- * This function requires privileged access to the hypervisor.
+ * This function may require privileged access to the hypervisor.
*
* @flags may include VIR_DOMAIN_AFFECT_LIVE or VIR_DOMAIN_AFFECT_CONFIG.
* Both flags may be set.
--
Eric Blake eblake(a)redhat.com +1-801-349-2682
Libvirt virtualization library http://libvirt.org
9:10 a.m.
On 08/02/2011 03:57 PM, Eric Blake wrote:
Actually, I'd rather go with 'may require' than 'requires'. And
there
are multiple culprits, not just this one line.
How about this patch instead?
Oh, I compared it to a neighbour comment and asumed
it was a typo, so I
didn't look further. My bad.
11:26 a.m.
On 08/02/2011 08:10 AM, Peter Krempa wrote:
On 08/02/2011 03:57 PM, Eric Blake wrote:
>
> Actually, I'd rather go with 'may require' than 'requires'. And
there
> are multiple culprits, not just this one line.
>
> How about this patch instead?
Oh, I compared it to a neighbour comment and asumed it was a typo, so I
didn't look further. My bad.
At any rate, I've gone ahead and pushed my bigger cleanup patch under
the trivial rule, since it is doc only and fixes grammar issues. Those
are the sorts of patches nice to include in the 0.9.4 release.
--
Eric Blake eblake(a)redhat.com +1-801-349-2682
Libvirt virtualization library http://libvirt.org
4864
days inactive
4864
days old
4 comments
3 participants
participants (3)
-
Daniel Veillard -
Eric Blake -
Peter Krempa