We still default to bhyveloader(1) if no explicit bootloader configuration is supplied in the domain. If the /domain/bootloader looks like grub-bhyve and the user doesn't supply /domain/bootloader_args, we make an intelligent guess and try chainloading the first partition on the disk. Caveats: - We can't install from CD without explicit bootloader_args. - We leave a device.map file lying around in /tmp. I don't see a good way not to do so without reworking the API somewhat. Sponsored by: EMC / Isilon storage division Signed-off-by: Conrad Meyer <conrad.meyer(a)isilon.com&gt; --- docs/drvbhyve.html.in | 28 ++++++++++-- docs/formatdomain.html.in | 4 +- po/libvirt.pot | 4 ++ src/bhyve/bhyve_command.c | 107 +++++++++++++++++++++++++++++++++++++++++----- 4 files changed, 128 insertions(+), 15 deletions(-) diff --git a/docs/drvbhyve.html.in b/docs/drvbhyve.html.in index 39afdf5..6e85800 100644 --- a/docs/drvbhyve.html.in +++ b/docs/drvbhyve.html.in @@ -37,8 +37,7 @@ bhyve+ssh://root@example.com/system (remote access, SSH tunnelled) <h3>Example config</h3> <p> The bhyve driver in libvirt is in its early stage and under active development. So it supports -only limited number of features bhyve provides. All the supported features could be found -in this sample domain XML. +only limited number of features bhyve provides. </p> <p> @@ -50,8 +49,8 @@ up to 31 PCI devices. <pre> &lt;domain type='bhyve'&gt; - &lt;name&gt;bhyve&lt;/name&gt; - &lt;uuid&gt;df3be7e7-a104-11e3-aeb0-50e5492bd3dc&lt;/uuid&gt; + &lt;name&gt;bhyve&lt;/name&gt; + &lt;uuid&gt;df3be7e7-a104-11e3-aeb0-50e5492bd3dc&lt;/uuid&gt; &lt;memory&gt;219136&lt;/memory&gt; &lt;currentMemory&gt;219136&lt;/currentMemory&gt; &lt;vcpu&gt;1&lt;/vcpu&gt; @@ -157,5 +156,26 @@ An example of domain XML device entry for that will look like:</p> <p>Please refer to the <a href="storage.html">Storage documentation</a> for more details on storage management.</p> +<h3><a name="grubbhyve">Using grub2-bhyve or Alternative Bootloaders</a></h3> + +<p>It's possible to boot non-FreeBSD guests by specifying an explicit +bootloader, e.g. <code>grub-bhyve(1)</code>. Arguments to the bootloader may be +specified as well. If no arguments are given and bootloader is +<code>grub-bhyve</code>, libvirt will try and boot from the first partition of +the disk image.</p> + +<pre> + ... + &lt;bootloader&gt;/usr/local/sbin/grub-bhyve&lt;/bootloader&gt; + &lt;bootloader_args&gt;...&lt;/bootloader_args&gt; + ... +</pre> + +<p>(Of course, to install from a CD a user will have to supply explicit +arguments to <code>grub-bhyve</code>.)</p> + +<p>Caveat: <code>bootloader_args</code> does not support any quoting. +Filenames, etc, must not have spaces or they will be tokenized incorrectly.</p> + </body> </html> diff --git a/docs/formatdomain.html.in b/docs/formatdomain.html.in index 0099ce7..b7b6c46 100644 --- a/docs/formatdomain.html.in +++ b/docs/formatdomain.html.in @@ -217,7 +217,9 @@ a BIOS, and instead the host is responsible to kicking off the operating system boot. This may use a pseudo-bootloader in the host to provide an interface to choose a kernel for the guest. - An example is <code>pygrub</code> with Xen. + An example is <code>pygrub</code> with Xen. The Bhyve hypervisor + also uses a host bootloader, either <code>bhyveload</code> or + <code>grub-bhyve</code>. </p> <pre> diff --git a/po/libvirt.pot b/po/libvirt.pot index 0b44ad7..d8c9a4d 100644 --- a/po/libvirt.pot +++ b/po/libvirt.pot @@ -851,6 +851,10 @@ msgstr "" msgid "domain should have at least one disk defined" msgstr "" +#: src/bhyve/bhyve_command.c:407 +msgid "Custom loader requires explicit %s configuration" +msgstr "" + #: src/bhyve/bhyve_device.c:50 msgid "PCI bus 0 slot 1 is reserved for the implicit LPC PCI-ISA bridge" msgstr "" diff --git a/src/bhyve/bhyve_command.c b/src/bhyve/bhyve_command.c index bea4a59..99956ae 100644 --- a/src/bhyve/bhyve_command.c +++ b/src/bhyve/bhyve_command.c @@ -300,6 +300,7 @@ virBhyveProcessBuildLoadCmd(virConnectPtr conn, { virCommandPtr cmd; virDomainDiskDefPtr disk; + bool bhyveload, grub_bhyve; if (def->ndisks < 1) { virReportError(VIR_ERR_CONFIG_UNSUPPORTED, "%s", @@ -326,19 +327,105 @@ virBhyveProcessBuildLoadCmd(virConnectPtr conn, return NULL; } - cmd = virCommandNew(BHYVELOAD); + if (def->os.bootloader == NULL) { + bhyveload = true; + grub_bhyve = false; + cmd = virCommandNew(BHYVELOAD); + } else { + bhyveload = false; + if (strstr(def->os.bootloader, "grub-bhyve") == 0) + grub_bhyve = true; + cmd = virCommandNew(def->os.bootloader); + } - /* Memory */ - virCommandAddArg(cmd, "-m"); - virCommandAddArgFormat(cmd, "%llu", - VIR_DIV_UP(def->mem.max_balloon, 1024)); + if (bhyveload && def->os.bootloaderArgs == NULL) { + VIR_DEBUG("%s: bhyveload with default arguments", __func__); + + /* Memory (MB) */ + virCommandAddArg(cmd, "-m"); + virCommandAddArgFormat(cmd, "%llu", + VIR_DIV_UP(def->mem.max_balloon, 1024)); + + /* Image path */ + virCommandAddArg(cmd, "-d"); + virCommandAddArg(cmd, virDomainDiskGetSource(disk)); + + /* VM name */ + virCommandAddArg(cmd, def->name); + } else if (grub_bhyve && def->os.bootloaderArgs == NULL) { + char tmpmapfile[128] = "/tmp/grub-bhyve-device.map_XXXXXX"; + FILE *f; + int fd; + + VIR_DEBUG("%s: grub-bhyve with default arguments", __func__); + + /* + * XXX Default grub-bhyve has some BIG caveats, but MAY work for some + * typical configurations. In particular: + * + * - Can't create a new VM this way (no CD, no boot from CD) + * - Assumes a GRUB install on hd0,msdos1 + */ - /* Image path */ - virCommandAddArg(cmd, "-d"); - virCommandAddArg(cmd, virDomainDiskGetSource(disk)); + /* XXX cleanup this file. */ + fd = mkstemp(tmpmapfile); + if (fd < 0) { + virReportError(VIR_ERR_OPEN_FAILED, tmpmapfile); + goto error; + } + + f = VIR_FDOPEN(fd, "wb+"); + if (f == NULL) { + VIR_FORCE_CLOSE(fd); + virReportError(VIR_ERR_OPEN_FAILED, tmpmapfile); + goto error; + } + + /* Grub device.map */ + fprintf(f, "(hd0) %s\n", virDomainDiskGetSource(disk)); + /* XXX CDs would look like: "(cd0) /path/to/CD" */ + + if (VIR_FCLOSE(f) < 0) { + virReportSystemError(errno, "%s", _("failed to close file")); + goto error; + } - /* VM name */ - virCommandAddArg(cmd, def->name); + + virCommandAddArg(cmd, "--device-map"); + virCommandAddArg(cmd, tmpmapfile); + + /* Memory in MB */ + virCommandAddArg(cmd, "--memory"); + virCommandAddArgFormat(cmd, "%llu", + VIR_DIV_UP(def->mem.max_balloon, 1024)); + + /* To boot from CD, "cd0" here. */ + virCommandAddArg(cmd, "--root"); + virCommandAddArg(cmd, "hd0,msdos1"); + + /* VM name */ + virCommandAddArg(cmd, def->name); + } else if (def->os.bootloaderArgs == NULL) { + virReportError(VIR_ERR_CONFIG_UNSUPPORTED, + _("Custom loader requires explicit %s configuration"), + "bootloader_args"); + goto error; + } else { + char **blargs, **arg; + + VIR_DEBUG("%s: custom loader '%s' with arguments", __func__, + def->os.bootloader); + + /* XXX: Handle quoted? */ + blargs = virStringSplit(def->os.bootloaderArgs, " ", 0); + for (arg = blargs; *arg; arg++) + virCommandAddArg(cmd, *arg); + virStringFreeList(blargs); + } return cmd; + +error: + virCommandFree(cmd); + return NULL; } -- 1.9.3

Sponsored by: EMC / Isilon storage division Signed-off-by: Conrad Meyer <conrad.meyer(a)isilon.com&gt; --- po/af.po | 4 ++++ po/am.po | 4 ++++ po/ar.po | 4 ++++ po/as.po | 4 ++++ po/be.po | 4 ++++ po/bg.po | 4 ++++ po/bn.po | 4 ++++ po/bn_IN.po | 4 ++++ po/bo.po | 4 ++++ po/bs.po | 4 ++++ po/ca.po | 4 ++++ po/cs.po | 4 ++++ po/cy.po | 4 ++++ po/da.po | 4 ++++ po/de.po | 4 ++++ po/el.po | 4 ++++ po/en_GB.po | 4 ++++ po/es.po | 4 ++++ po/et.po | 4 ++++ po/eu_ES.po | 4 ++++ po/fa.po | 4 ++++ po/fi.po | 4 ++++ po/fr.po | 4 ++++ po/gl.po | 4 ++++ po/gu.po | 4 ++++ po/he.po | 4 ++++ po/hi.po | 4 ++++ po/hr.po | 4 ++++ po/hu.po | 4 ++++ po/hy.po | 4 ++++ po/id.po | 4 ++++ po/is.po | 4 ++++ po/it.po | 4 ++++ po/ja.po | 4 ++++ po/ka.po | 4 ++++ po/kn.po | 4 ++++ po/ko.po | 4 ++++ po/ku.po | 4 ++++ po/lo.po | 4 ++++ po/lt.po | 4 ++++ po/lv.po | 4 ++++ po/mk.po | 4 ++++ po/ml.po | 4 ++++ po/mr.po | 4 ++++ po/ms.po | 4 ++++ po/my.po | 4 ++++ po/nb.po | 4 ++++ po/nl.po | 4 ++++ po/nn.po | 4 ++++ po/nso.po | 4 ++++ po/or.po | 4 ++++ po/pa.po | 4 ++++ po/pl.po | 4 ++++ po/pt.po | 4 ++++ po/pt_BR.po | 4 ++++ po/ro.po | 4 ++++ po/ru.po | 4 ++++ po/si.po | 4 ++++ po/sk.po | 4 ++++ po/sl.po | 4 ++++ po/sq.po | 4 ++++ po/sr.po | 4 ++++ po/sr(a)latin.po | 4 ++++ po/sv.po | 4 ++++ po/ta.po | 4 ++++ po/te.po | 4 ++++ po/th.po | 4 ++++ po/tr.po | 4 ++++ po/uk.po | 4 ++++ po/ur.po | 4 ++++ po/vi.po | 4 ++++ po/vi_VN.po | 4 ++++ po/zh_CN.po | 4 ++++ po/zh_TW.po | 4 ++++ po/zu.po | 4 ++++ 75 files changed, 300 insertions(+) diff --git a/po/af.po b/po/af.po index 0e1374d..6e54827 100644 --- a/po/af.po +++ b/po/af.po @@ -853,6 +853,10 @@ msgstr "" msgid "domain should have at least one disk defined" msgstr "" +#: src/bhyve/bhyve_command.c:407 +msgid "Custom loader requires explicit %s configuration" +msgstr "" + #: src/bhyve/bhyve_device.c:50 msgid "PCI bus 0 slot 1 is reserved for the implicit LPC PCI-ISA bridge" msgstr "" diff --git a/po/am.po b/po/am.po index 8230ec8..c664b6b 100644 --- a/po/am.po +++ b/po/am.po @@ -853,6 +853,10 @@ msgstr "" msgid "domain should have at least one disk defined" msgstr "" +#: src/bhyve/bhyve_command.c:407 +msgid "Custom loader requires explicit %s configuration" +msgstr "" + #: src/bhyve/bhyve_device.c:50 msgid "PCI bus 0 slot 1 is reserved for the implicit LPC PCI-ISA bridge" msgstr "" diff --git a/po/ar.po b/po/ar.po index fed8f1f..3745c56 100644 --- a/po/ar.po +++ b/po/ar.po @@ -854,6 +854,10 @@ msgstr "" msgid "domain should have at least one disk defined" msgstr "" +#: src/bhyve/bhyve_command.c:407 +msgid "Custom loader requires explicit %s configuration" +msgstr "" + #: src/bhyve/bhyve_device.c:50 msgid "PCI bus 0 slot 1 is reserved for the implicit LPC PCI-ISA bridge" msgstr "" diff --git a/po/as.po b/po/as.po index b2bba9a..1e8ecad 100644 --- a/po/as.po +++ b/po/as.po @@ -915,6 +915,10 @@ msgstr "উৎস পথৰ অবিহনে cdrom ডিভাইচ সম msgid "domain should have at least one disk defined" msgstr "ডমেইনৰ অন্তত এটা ডিস্ক বিৱৰিত থাকিব লাগিব" +#: src/bhyve/bhyve_command.c:407 +msgid "Custom loader requires explicit %s configuration" +msgstr "" + #: src/bhyve/bhyve_device.c:50 msgid "PCI bus 0 slot 1 is reserved for the implicit LPC PCI-ISA bridge" msgstr "PCI বাচ 0 স্লট 1 ইমপ্লিচিট LPC PCI-ISA ব্ৰিজৰ বাবে সংৰক্ষিত" diff --git a/po/be.po b/po/be.po index 1f4b856..3b5ff79 100644 --- a/po/be.po +++ b/po/be.po @@ -854,6 +854,10 @@ msgstr "" msgid "domain should have at least one disk defined" msgstr "" +#: src/bhyve/bhyve_command.c:407 +msgid "Custom loader requires explicit %s configuration" +msgstr "" + #: src/bhyve/bhyve_device.c:50 msgid "PCI bus 0 slot 1 is reserved for the implicit LPC PCI-ISA bridge" msgstr "" diff --git a/po/bg.po b/po/bg.po index 05d9e5d..0d75cb5 100644 --- a/po/bg.po +++ b/po/bg.po @@ -855,6 +855,10 @@ msgstr "" msgid "domain should have at least one disk defined" msgstr "" +#: src/bhyve/bhyve_command.c:407 +msgid "Custom loader requires explicit %s configuration" +msgstr "" + #: src/bhyve/bhyve_device.c:50 msgid "PCI bus 0 slot 1 is reserved for the implicit LPC PCI-ISA bridge" msgstr "" diff --git a/po/bn.po b/po/bn.po index ab15fc4..3c8cf38 100644 --- a/po/bn.po +++ b/po/bn.po @@ -853,6 +853,10 @@ msgstr "" msgid "domain should have at least one disk defined" msgstr "" +#: src/bhyve/bhyve_command.c:407 +msgid "Custom loader requires explicit %s configuration" +msgstr "" + #: src/bhyve/bhyve_device.c:50 msgid "PCI bus 0 slot 1 is reserved for the implicit LPC PCI-ISA bridge" msgstr "" diff --git a/po/bn_IN.po b/po/bn_IN.po index 88dd968..ac3af06 100644 --- a/po/bn_IN.po +++ b/po/bn_IN.po @@ -876,6 +876,10 @@ msgstr "" msgid "domain should have at least one disk defined" msgstr "" +#: src/bhyve/bhyve_command.c:407 +msgid "Custom loader requires explicit %s configuration" +msgstr "" + #: src/bhyve/bhyve_device.c:50 msgid "PCI bus 0 slot 1 is reserved for the implicit LPC PCI-ISA bridge" msgstr "" diff --git a/po/bo.po b/po/bo.po index cfbee90..55c561b 100644 --- a/po/bo.po +++ b/po/bo.po @@ -851,6 +851,10 @@ msgstr "" msgid "domain should have at least one disk defined" msgstr "" +#: src/bhyve/bhyve_command.c:407 +msgid "Custom loader requires explicit %s configuration" +msgstr "" + #: src/bhyve/bhyve_device.c:50 msgid "PCI bus 0 slot 1 is reserved for the implicit LPC PCI-ISA bridge" msgstr "" diff --git a/po/bs.po b/po/bs.po index 80c8ac2..90381b3 100644 --- a/po/bs.po +++ b/po/bs.po @@ -855,6 +855,10 @@ msgstr "" msgid "domain should have at least one disk defined" msgstr "" +#: src/bhyve/bhyve_command.c:407 +msgid "Custom loader requires explicit %s configuration" +msgstr "" + #: src/bhyve/bhyve_device.c:50 msgid "PCI bus 0 slot 1 is reserved for the implicit LPC PCI-ISA bridge" msgstr "" diff --git a/po/ca.po b/po/ca.po index 2ccbfdc..f14e08a 100644 --- a/po/ca.po +++ b/po/ca.po @@ -858,6 +858,10 @@ msgstr "" msgid "domain should have at least one disk defined" msgstr "" +#: src/bhyve/bhyve_command.c:407 +msgid "Custom loader requires explicit %s configuration" +msgstr "" + #: src/bhyve/bhyve_device.c:50 msgid "PCI bus 0 slot 1 is reserved for the implicit LPC PCI-ISA bridge" msgstr "" diff --git a/po/cs.po b/po/cs.po index 35a9ba6..dd44065 100644 --- a/po/cs.po +++ b/po/cs.po @@ -862,6 +862,10 @@ msgstr "" msgid "domain should have at least one disk defined" msgstr "" +#: src/bhyve/bhyve_command.c:407 +msgid "Custom loader requires explicit %s configuration" +msgstr "" + #: src/bhyve/bhyve_device.c:50 msgid "PCI bus 0 slot 1 is reserved for the implicit LPC PCI-ISA bridge" msgstr "" diff --git a/po/cy.po b/po/cy.po index 51e11b8..466965b 100644 --- a/po/cy.po +++ b/po/cy.po @@ -854,6 +854,10 @@ msgstr "" msgid "domain should have at least one disk defined" msgstr "" +#: src/bhyve/bhyve_command.c:407 +msgid "Custom loader requires explicit %s configuration" +msgstr "" + #: src/bhyve/bhyve_device.c:50 msgid "PCI bus 0 slot 1 is reserved for the implicit LPC PCI-ISA bridge" msgstr "" diff --git a/po/da.po b/po/da.po index 04d39ad..a820ecb 100644 --- a/po/da.po +++ b/po/da.po @@ -856,6 +856,10 @@ msgstr "" msgid "domain should have at least one disk defined" msgstr "" +#: src/bhyve/bhyve_command.c:407 +msgid "Custom loader requires explicit %s configuration" +msgstr "" + #: src/bhyve/bhyve_device.c:50 msgid "PCI bus 0 slot 1 is reserved for the implicit LPC PCI-ISA bridge" msgstr "" diff --git a/po/de.po b/po/de.po index 64cf6fe..f15b826 100644 --- a/po/de.po +++ b/po/de.po @@ -911,6 +911,10 @@ msgstr "Benannte Einheiten-Aliasnamen werden nicht unterstützt" msgid "domain should have at least one disk defined" msgstr "Domain XML muss zumindest ein <disk> Element enthalten." +#: src/bhyve/bhyve_command.c:407 +msgid "Custom loader requires explicit %s configuration" +msgstr "" + #: src/bhyve/bhyve_device.c:50 msgid "PCI bus 0 slot 1 is reserved for the implicit LPC PCI-ISA bridge" msgstr "" diff --git a/po/el.po b/po/el.po index c62c443..fdd00d4 100644 --- a/po/el.po +++ b/po/el.po @@ -869,6 +869,10 @@ msgstr "" msgid "domain should have at least one disk defined" msgstr "" +#: src/bhyve/bhyve_command.c:407 +msgid "Custom loader requires explicit %s configuration" +msgstr "" + #: src/bhyve/bhyve_device.c:50 msgid "PCI bus 0 slot 1 is reserved for the implicit LPC PCI-ISA bridge" msgstr "" diff --git a/po/en_GB.po b/po/en_GB.po index 833044a..55beffd 100644 --- a/po/en_GB.po +++ b/po/en_GB.po @@ -916,6 +916,10 @@ msgstr "Named device aliases are not supported" msgid "domain should have at least one disk defined" msgstr "Domain XML must contain at least one <disk> element." +#: src/bhyve/bhyve_command.c:407 +msgid "Custom loader requires explicit %s configuration" +msgstr "" + #: src/bhyve/bhyve_device.c:50 msgid "PCI bus 0 slot 1 is reserved for the implicit LPC PCI-ISA bridge" msgstr "" diff --git a/po/es.po b/po/es.po index 8a54e10..7946ae0 100644 --- a/po/es.po +++ b/po/es.po @@ -900,6 +900,10 @@ msgstr "Los dispositivos llamados alias no tienen soporte" msgid "domain should have at least one disk defined" msgstr "XML de dominio debe contener al menos un elemento <disk>." +#: src/bhyve/bhyve_command.c:407 +msgid "Custom loader requires explicit %s configuration" +msgstr "" + #: src/bhyve/bhyve_device.c:50 msgid "PCI bus 0 slot 1 is reserved for the implicit LPC PCI-ISA bridge" msgstr "" diff --git a/po/et.po b/po/et.po index bd5d59f..b74b89d 100644 --- a/po/et.po +++ b/po/et.po @@ -853,6 +853,10 @@ msgstr "" msgid "domain should have at least one disk defined" msgstr "" +#: src/bhyve/bhyve_command.c:407 +msgid "Custom loader requires explicit %s configuration" +msgstr "" + #: src/bhyve/bhyve_device.c:50 msgid "PCI bus 0 slot 1 is reserved for the implicit LPC PCI-ISA bridge" msgstr "" diff --git a/po/eu_ES.po b/po/eu_ES.po index 3939c44..3e0f2f8 100644 --- a/po/eu_ES.po +++ b/po/eu_ES.po @@ -853,6 +853,10 @@ msgstr "" msgid "domain should have at least one disk defined" msgstr "" +#: src/bhyve/bhyve_command.c:407 +msgid "Custom loader requires explicit %s configuration" +msgstr "" + #: src/bhyve/bhyve_device.c:50 msgid "PCI bus 0 slot 1 is reserved for the implicit LPC PCI-ISA bridge" msgstr "" diff --git a/po/fa.po b/po/fa.po index dba48be..00782ce 100644 --- a/po/fa.po +++ b/po/fa.po @@ -853,6 +853,10 @@ msgstr "" msgid "domain should have at least one disk defined" msgstr "" +#: src/bhyve/bhyve_command.c:407 +msgid "Custom loader requires explicit %s configuration" +msgstr "" + #: src/bhyve/bhyve_device.c:50 msgid "PCI bus 0 slot 1 is reserved for the implicit LPC PCI-ISA bridge" msgstr "" diff --git a/po/fi.po b/po/fi.po index 2e487f7..c2eb1cd 100644 --- a/po/fi.po +++ b/po/fi.po @@ -854,6 +854,10 @@ msgstr "" msgid "domain should have at least one disk defined" msgstr "" +#: src/bhyve/bhyve_command.c:407 +msgid "Custom loader requires explicit %s configuration" +msgstr "" + #: src/bhyve/bhyve_device.c:50 msgid "PCI bus 0 slot 1 is reserved for the implicit LPC PCI-ISA bridge" msgstr "" diff --git a/po/fr.po b/po/fr.po index 4e46d32..05ed448 100644 --- a/po/fr.po +++ b/po/fr.po @@ -899,6 +899,10 @@ msgstr "" msgid "domain should have at least one disk defined" msgstr "" +#: src/bhyve/bhyve_command.c:407 +msgid "Custom loader requires explicit %s configuration" +msgstr "" + #: src/bhyve/bhyve_device.c:50 msgid "PCI bus 0 slot 1 is reserved for the implicit LPC PCI-ISA bridge" msgstr "" diff --git a/po/gl.po b/po/gl.po index 7e089a0..ee0c2a8 100644 --- a/po/gl.po +++ b/po/gl.po @@ -853,6 +853,10 @@ msgstr "" msgid "domain should have at least one disk defined" msgstr "" +#: src/bhyve/bhyve_command.c:407 +msgid "Custom loader requires explicit %s configuration" +msgstr "" + #: src/bhyve/bhyve_device.c:50 msgid "PCI bus 0 slot 1 is reserved for the implicit LPC PCI-ISA bridge" msgstr "" diff --git a/po/gu.po b/po/gu.po index fea7041..d050c35 100644 --- a/po/gu.po +++ b/po/gu.po @@ -913,6 +913,10 @@ msgstr "" msgid "domain should have at least one disk defined" msgstr "" +#: src/bhyve/bhyve_command.c:407 +msgid "Custom loader requires explicit %s configuration" +msgstr "" + #: src/bhyve/bhyve_device.c:50 msgid "PCI bus 0 slot 1 is reserved for the implicit LPC PCI-ISA bridge" msgstr "" diff --git a/po/he.po b/po/he.po index e236131..786699d 100644 --- a/po/he.po +++ b/po/he.po @@ -853,6 +853,10 @@ msgstr "" msgid "domain should have at least one disk defined" msgstr "" +#: src/bhyve/bhyve_command.c:407 +msgid "Custom loader requires explicit %s configuration" +msgstr "" + #: src/bhyve/bhyve_device.c:50 msgid "PCI bus 0 slot 1 is reserved for the implicit LPC PCI-ISA bridge" msgstr "" diff --git a/po/hi.po b/po/hi.po index d918984..b3dc6d8 100644 --- a/po/hi.po +++ b/po/hi.po @@ -890,6 +890,10 @@ msgstr "नामित युक्ति एलियास समर्थि msgid "domain should have at least one disk defined" msgstr "डोमेन XML कम से कम एक <disk> तत्व शामिल करना अनिवार्य है." +#: src/bhyve/bhyve_command.c:407 +msgid "Custom loader requires explicit %s configuration" +msgstr "" + #: src/bhyve/bhyve_device.c:50 msgid "PCI bus 0 slot 1 is reserved for the implicit LPC PCI-ISA bridge" msgstr "" diff --git a/po/hr.po b/po/hr.po index 3dda86b..d532f83 100644 --- a/po/hr.po +++ b/po/hr.po @@ -855,6 +855,10 @@ msgstr "" msgid "domain should have at least one disk defined" msgstr "" +#: src/bhyve/bhyve_command.c:407 +msgid "Custom loader requires explicit %s configuration" +msgstr "" + #: src/bhyve/bhyve_device.c:50 msgid "PCI bus 0 slot 1 is reserved for the implicit LPC PCI-ISA bridge" msgstr "" diff --git a/po/hu.po b/po/hu.po index f0cd18f..5dc6b83 100644 --- a/po/hu.po +++ b/po/hu.po @@ -855,6 +855,10 @@ msgstr "" msgid "domain should have at least one disk defined" msgstr "" +#: src/bhyve/bhyve_command.c:407 +msgid "Custom loader requires explicit %s configuration" +msgstr "" + #: src/bhyve/bhyve_device.c:50 msgid "PCI bus 0 slot 1 is reserved for the implicit LPC PCI-ISA bridge" msgstr "" diff --git a/po/hy.po b/po/hy.po index 182b4ef..4d1fc59 100644 --- a/po/hy.po +++ b/po/hy.po @@ -853,6 +853,10 @@ msgstr "" msgid "domain should have at least one disk defined" msgstr "" +#: src/bhyve/bhyve_command.c:407 +msgid "Custom loader requires explicit %s configuration" +msgstr "" + #: src/bhyve/bhyve_device.c:50 msgid "PCI bus 0 slot 1 is reserved for the implicit LPC PCI-ISA bridge" msgstr "" diff --git a/po/id.po b/po/id.po index 97578be..c758356 100644 --- a/po/id.po +++ b/po/id.po @@ -856,6 +856,10 @@ msgstr "" msgid "domain should have at least one disk defined" msgstr "" +#: src/bhyve/bhyve_command.c:407 +msgid "Custom loader requires explicit %s configuration" +msgstr "" + #: src/bhyve/bhyve_device.c:50 msgid "PCI bus 0 slot 1 is reserved for the implicit LPC PCI-ISA bridge" msgstr "" diff --git a/po/is.po b/po/is.po index 321b801..5b16607 100644 --- a/po/is.po +++ b/po/is.po @@ -853,6 +853,10 @@ msgstr "" msgid "domain should have at least one disk defined" msgstr "" +#: src/bhyve/bhyve_command.c:407 +msgid "Custom loader requires explicit %s configuration" +msgstr "" + #: src/bhyve/bhyve_device.c:50 msgid "PCI bus 0 slot 1 is reserved for the implicit LPC PCI-ISA bridge" msgstr "" diff --git a/po/it.po b/po/it.po index 5e52e2f..77c1368 100644 --- a/po/it.po +++ b/po/it.po @@ -867,6 +867,10 @@ msgstr "non è supportato il collegamento a caldo dell'unità" msgid "domain should have at least one disk defined" msgstr "" +#: src/bhyve/bhyve_command.c:407 +msgid "Custom loader requires explicit %s configuration" +msgstr "" + #: src/bhyve/bhyve_device.c:50 msgid "PCI bus 0 slot 1 is reserved for the implicit LPC PCI-ISA bridge" msgstr "" diff --git a/po/ja.po b/po/ja.po index 52c8b86..801398a 100644 --- a/po/ja.po +++ b/po/ja.po @@ -919,6 +919,10 @@ msgstr "" msgid "domain should have at least one disk defined" msgstr "" +#: src/bhyve/bhyve_command.c:407 +msgid "Custom loader requires explicit %s configuration" +msgstr "" + #: src/bhyve/bhyve_device.c:50 msgid "PCI bus 0 slot 1 is reserved for the implicit LPC PCI-ISA bridge" msgstr "" diff --git a/po/ka.po b/po/ka.po index 51fb83d..dab5f16 100644 --- a/po/ka.po +++ b/po/ka.po @@ -853,6 +853,10 @@ msgstr "" msgid "domain should have at least one disk defined" msgstr "" +#: src/bhyve/bhyve_command.c:407 +msgid "Custom loader requires explicit %s configuration" +msgstr "" + #: src/bhyve/bhyve_device.c:50 msgid "PCI bus 0 slot 1 is reserved for the implicit LPC PCI-ISA bridge" msgstr "" diff --git a/po/kn.po b/po/kn.po index 74589ab..e74ba4f 100644 --- a/po/kn.po +++ b/po/kn.po @@ -900,6 +900,10 @@ msgstr "" msgid "domain should have at least one disk defined" msgstr "" +#: src/bhyve/bhyve_command.c:407 +msgid "Custom loader requires explicit %s configuration" +msgstr "" + #: src/bhyve/bhyve_device.c:50 msgid "PCI bus 0 slot 1 is reserved for the implicit LPC PCI-ISA bridge" msgstr "" diff --git a/po/ko.po b/po/ko.po index 06c5f63..7f216ff 100644 --- a/po/ko.po +++ b/po/ko.po @@ -882,6 +882,10 @@ msgstr "원본 경로가 없는 CD-ROM 장치를 지원하지 않습니다" msgid "domain should have at least one disk defined" msgstr "도메인은 최소 하나의 디스크를 정의해야 합니다" +#: src/bhyve/bhyve_command.c:407 +msgid "Custom loader requires explicit %s configuration" +msgstr "" + #: src/bhyve/bhyve_device.c:50 msgid "PCI bus 0 slot 1 is reserved for the implicit LPC PCI-ISA bridge" msgstr "PCI 버스 0 슬롯 1은 암시적 LPC PCI-ISA 브릿지에 예약되어 있습니다" diff --git a/po/ku.po b/po/ku.po index 0ca4331..7a30d94 100644 --- a/po/ku.po +++ b/po/ku.po @@ -853,6 +853,10 @@ msgstr "" msgid "domain should have at least one disk defined" msgstr "" +#: src/bhyve/bhyve_command.c:407 +msgid "Custom loader requires explicit %s configuration" +msgstr "" + #: src/bhyve/bhyve_device.c:50 msgid "PCI bus 0 slot 1 is reserved for the implicit LPC PCI-ISA bridge" msgstr "" diff --git a/po/lo.po b/po/lo.po index ee3285c..1237bfe 100644 --- a/po/lo.po +++ b/po/lo.po @@ -853,6 +853,10 @@ msgstr "" msgid "domain should have at least one disk defined" msgstr "" +#: src/bhyve/bhyve_command.c:407 +msgid "Custom loader requires explicit %s configuration" +msgstr "" + #: src/bhyve/bhyve_device.c:50 msgid "PCI bus 0 slot 1 is reserved for the implicit LPC PCI-ISA bridge" msgstr "" diff --git a/po/lt.po b/po/lt.po index 3547478..e9410d9 100644 --- a/po/lt.po +++ b/po/lt.po @@ -854,6 +854,10 @@ msgstr "" msgid "domain should have at least one disk defined" msgstr "" +#: src/bhyve/bhyve_command.c:407 +msgid "Custom loader requires explicit %s configuration" +msgstr "" + #: src/bhyve/bhyve_device.c:50 msgid "PCI bus 0 slot 1 is reserved for the implicit LPC PCI-ISA bridge" msgstr "" diff --git a/po/lv.po b/po/lv.po index da15417..db3fc85 100644 --- a/po/lv.po +++ b/po/lv.po @@ -854,6 +854,10 @@ msgstr "" msgid "domain should have at least one disk defined" msgstr "" +#: src/bhyve/bhyve_command.c:407 +msgid "Custom loader requires explicit %s configuration" +msgstr "" + #: src/bhyve/bhyve_device.c:50 msgid "PCI bus 0 slot 1 is reserved for the implicit LPC PCI-ISA bridge" msgstr "" diff --git a/po/mk.po b/po/mk.po index bca6175..cba9c7d 100644 --- a/po/mk.po +++ b/po/mk.po @@ -856,6 +856,10 @@ msgstr "" msgid "domain should have at least one disk defined" msgstr "" +#: src/bhyve/bhyve_command.c:407 +msgid "Custom loader requires explicit %s configuration" +msgstr "" + #: src/bhyve/bhyve_device.c:50 msgid "PCI bus 0 slot 1 is reserved for the implicit LPC PCI-ISA bridge" msgstr "" diff --git a/po/ml.po b/po/ml.po index a316f8f..6dd9a56 100644 --- a/po/ml.po +++ b/po/ml.po @@ -905,6 +905,10 @@ msgstr "" msgid "domain should have at least one disk defined" msgstr "" +#: src/bhyve/bhyve_command.c:407 +msgid "Custom loader requires explicit %s configuration" +msgstr "" + #: src/bhyve/bhyve_device.c:50 msgid "PCI bus 0 slot 1 is reserved for the implicit LPC PCI-ISA bridge" msgstr "" diff --git a/po/mr.po b/po/mr.po index 4feb3ca..1f40e27 100644 --- a/po/mr.po +++ b/po/mr.po @@ -912,6 +912,10 @@ msgstr "स्रोत मार्गविना cdrom साधन समर msgid "domain should have at least one disk defined" msgstr "डोमेनकडे किमान एक डिस्क ठरविलेले पाहिजे" +#: src/bhyve/bhyve_command.c:407 +msgid "Custom loader requires explicit %s configuration" +msgstr "" + #: src/bhyve/bhyve_device.c:50 msgid "PCI bus 0 slot 1 is reserved for the implicit LPC PCI-ISA bridge" msgstr "PCI बस 0 स्लॉट 1 आरक्षित आहे, सूचीत PC PCI-ISA ब्रिजकरिता" diff --git a/po/ms.po b/po/ms.po index f3dd1e7..9618322 100644 --- a/po/ms.po +++ b/po/ms.po @@ -853,6 +853,10 @@ msgstr "" msgid "domain should have at least one disk defined" msgstr "" +#: src/bhyve/bhyve_command.c:407 +msgid "Custom loader requires explicit %s configuration" +msgstr "" + #: src/bhyve/bhyve_device.c:50 msgid "PCI bus 0 slot 1 is reserved for the implicit LPC PCI-ISA bridge" msgstr "" diff --git a/po/my.po b/po/my.po index 92a4af8..0e225fb 100644 --- a/po/my.po +++ b/po/my.po @@ -853,6 +853,10 @@ msgstr "" msgid "domain should have at least one disk defined" msgstr "" +#: src/bhyve/bhyve_command.c:407 +msgid "Custom loader requires explicit %s configuration" +msgstr "" + #: src/bhyve/bhyve_device.c:50 msgid "PCI bus 0 slot 1 is reserved for the implicit LPC PCI-ISA bridge" msgstr "" diff --git a/po/nb.po b/po/nb.po index ff77e7c..9bf88ef 100644 --- a/po/nb.po +++ b/po/nb.po @@ -855,6 +855,10 @@ msgstr "" msgid "domain should have at least one disk defined" msgstr "" +#: src/bhyve/bhyve_command.c:407 +msgid "Custom loader requires explicit %s configuration" +msgstr "" + #: src/bhyve/bhyve_device.c:50 msgid "PCI bus 0 slot 1 is reserved for the implicit LPC PCI-ISA bridge" msgstr "" diff --git a/po/nl.po b/po/nl.po index f906e10..a8f76fc 100644 --- a/po/nl.po +++ b/po/nl.po @@ -867,6 +867,10 @@ msgstr "Benoemde apparaat aliassen worden niet ondersteund" msgid "domain should have at least one disk defined" msgstr "" +#: src/bhyve/bhyve_command.c:407 +msgid "Custom loader requires explicit %s configuration" +msgstr "" + #: src/bhyve/bhyve_device.c:50 msgid "PCI bus 0 slot 1 is reserved for the implicit LPC PCI-ISA bridge" msgstr "" diff --git a/po/nn.po b/po/nn.po index 1fdb298..e8de23c 100644 --- a/po/nn.po +++ b/po/nn.po @@ -853,6 +853,10 @@ msgstr "" msgid "domain should have at least one disk defined" msgstr "" +#: src/bhyve/bhyve_command.c:407 +msgid "Custom loader requires explicit %s configuration" +msgstr "" + #: src/bhyve/bhyve_device.c:50 msgid "PCI bus 0 slot 1 is reserved for the implicit LPC PCI-ISA bridge" msgstr "" diff --git a/po/nso.po b/po/nso.po index ca73df5..3569368 100644 --- a/po/nso.po +++ b/po/nso.po @@ -853,6 +853,10 @@ msgstr "" msgid "domain should have at least one disk defined" msgstr "" +#: src/bhyve/bhyve_command.c:407 +msgid "Custom loader requires explicit %s configuration" +msgstr "" + #: src/bhyve/bhyve_device.c:50 msgid "PCI bus 0 slot 1 is reserved for the implicit LPC PCI-ISA bridge" msgstr "" diff --git a/po/or.po b/po/or.po index 4f99a8b..995544e 100644 --- a/po/or.po +++ b/po/or.po @@ -876,6 +876,10 @@ msgstr "" msgid "domain should have at least one disk defined" msgstr "" +#: src/bhyve/bhyve_command.c:407 +msgid "Custom loader requires explicit %s configuration" +msgstr "" + #: src/bhyve/bhyve_device.c:50 msgid "PCI bus 0 slot 1 is reserved for the implicit LPC PCI-ISA bridge" msgstr "" diff --git a/po/pa.po b/po/pa.po index 9f8c9d9..e9fd8db 100644 --- a/po/pa.po +++ b/po/pa.po @@ -895,6 +895,10 @@ msgstr "" msgid "domain should have at least one disk defined" msgstr "" +#: src/bhyve/bhyve_command.c:407 +msgid "Custom loader requires explicit %s configuration" +msgstr "" + #: src/bhyve/bhyve_device.c:50 msgid "PCI bus 0 slot 1 is reserved for the implicit LPC PCI-ISA bridge" msgstr "" diff --git a/po/pl.po b/po/pl.po index fb7e20c..1718bfd 100644 --- a/po/pl.po +++ b/po/pl.po @@ -867,6 +867,10 @@ msgstr "Aliasy nazwanych urządzeń są nieobsługiwane" msgid "domain should have at least one disk defined" msgstr "" +#: src/bhyve/bhyve_command.c:407 +msgid "Custom loader requires explicit %s configuration" +msgstr "" + #: src/bhyve/bhyve_device.c:50 msgid "PCI bus 0 slot 1 is reserved for the implicit LPC PCI-ISA bridge" msgstr "" diff --git a/po/pt.po b/po/pt.po index a5a1f50..671f2c2 100644 --- a/po/pt.po +++ b/po/pt.po @@ -854,6 +854,10 @@ msgstr "" msgid "domain should have at least one disk defined" msgstr "" +#: src/bhyve/bhyve_command.c:407 +msgid "Custom loader requires explicit %s configuration" +msgstr "" + #: src/bhyve/bhyve_device.c:50 msgid "PCI bus 0 slot 1 is reserved for the implicit LPC PCI-ISA bridge" msgstr "" diff --git a/po/pt_BR.po b/po/pt_BR.po index f261bbd..d70c20e 100644 --- a/po/pt_BR.po +++ b/po/pt_BR.po @@ -902,6 +902,10 @@ msgstr "" msgid "domain should have at least one disk defined" msgstr "" +#: src/bhyve/bhyve_command.c:407 +msgid "Custom loader requires explicit %s configuration" +msgstr "" + #: src/bhyve/bhyve_device.c:50 msgid "PCI bus 0 slot 1 is reserved for the implicit LPC PCI-ISA bridge" msgstr "" diff --git a/po/ro.po b/po/ro.po index b7efaf0..9321cee 100644 --- a/po/ro.po +++ b/po/ro.po @@ -854,6 +854,10 @@ msgstr "" msgid "domain should have at least one disk defined" msgstr "" +#: src/bhyve/bhyve_command.c:407 +msgid "Custom loader requires explicit %s configuration" +msgstr "" + #: src/bhyve/bhyve_device.c:50 msgid "PCI bus 0 slot 1 is reserved for the implicit LPC PCI-ISA bridge" msgstr "" diff --git a/po/ru.po b/po/ru.po index 3b6b6a6..2272f7f 100644 --- a/po/ru.po +++ b/po/ru.po @@ -918,6 +918,10 @@ msgstr "" msgid "domain should have at least one disk defined" msgstr "" +#: src/bhyve/bhyve_command.c:407 +msgid "Custom loader requires explicit %s configuration" +msgstr "" + #: src/bhyve/bhyve_device.c:50 msgid "PCI bus 0 slot 1 is reserved for the implicit LPC PCI-ISA bridge" msgstr "" diff --git a/po/si.po b/po/si.po index 18f0dea..2fe3215 100644 --- a/po/si.po +++ b/po/si.po @@ -853,6 +853,10 @@ msgstr "" msgid "domain should have at least one disk defined" msgstr "" +#: src/bhyve/bhyve_command.c:407 +msgid "Custom loader requires explicit %s configuration" +msgstr "" + #: src/bhyve/bhyve_device.c:50 msgid "PCI bus 0 slot 1 is reserved for the implicit LPC PCI-ISA bridge" msgstr "" diff --git a/po/sk.po b/po/sk.po index 8d55137..d9f26c9 100644 --- a/po/sk.po +++ b/po/sk.po @@ -853,6 +853,10 @@ msgstr "" msgid "domain should have at least one disk defined" msgstr "" +#: src/bhyve/bhyve_command.c:407 +msgid "Custom loader requires explicit %s configuration" +msgstr "" + #: src/bhyve/bhyve_device.c:50 msgid "PCI bus 0 slot 1 is reserved for the implicit LPC PCI-ISA bridge" msgstr "" diff --git a/po/sl.po b/po/sl.po index 9425c9d..bf5d86f 100644 --- a/po/sl.po +++ b/po/sl.po @@ -854,6 +854,10 @@ msgstr "" msgid "domain should have at least one disk defined" msgstr "" +#: src/bhyve/bhyve_command.c:407 +msgid "Custom loader requires explicit %s configuration" +msgstr "" + #: src/bhyve/bhyve_device.c:50 msgid "PCI bus 0 slot 1 is reserved for the implicit LPC PCI-ISA bridge" msgstr "" diff --git a/po/sq.po b/po/sq.po index 3a597d0..bac1d70 100644 --- a/po/sq.po +++ b/po/sq.po @@ -853,6 +853,10 @@ msgstr "" msgid "domain should have at least one disk defined" msgstr "" +#: src/bhyve/bhyve_command.c:407 +msgid "Custom loader requires explicit %s configuration" +msgstr "" + #: src/bhyve/bhyve_device.c:50 msgid "PCI bus 0 slot 1 is reserved for the implicit LPC PCI-ISA bridge" msgstr "" diff --git a/po/sr.po b/po/sr.po index f54d52f..a2b1ff5 100644 --- a/po/sr.po +++ b/po/sr.po @@ -871,6 +871,10 @@ msgstr "" msgid "domain should have at least one disk defined" msgstr "" +#: src/bhyve/bhyve_command.c:407 +msgid "Custom loader requires explicit %s configuration" +msgstr "" + #: src/bhyve/bhyve_device.c:50 msgid "PCI bus 0 slot 1 is reserved for the implicit LPC PCI-ISA bridge" msgstr "" diff --git a/po/sr(a)latin.po b/po/sr(a)latin.po index c9ae98f..586230f 100644 --- a/po/sr(a)latin.po +++ b/po/sr(a)latin.po @@ -871,6 +871,10 @@ msgstr "" msgid "domain should have at least one disk defined" msgstr "" +#: src/bhyve/bhyve_command.c:407 +msgid "Custom loader requires explicit %s configuration" +msgstr "" + #: src/bhyve/bhyve_device.c:50 msgid "PCI bus 0 slot 1 is reserved for the implicit LPC PCI-ISA bridge" msgstr "" diff --git a/po/sv.po b/po/sv.po index 0a1e320..f2e5bb6 100644 --- a/po/sv.po +++ b/po/sv.po @@ -860,6 +860,10 @@ msgstr "" msgid "domain should have at least one disk defined" msgstr "" +#: src/bhyve/bhyve_command.c:407 +msgid "Custom loader requires explicit %s configuration" +msgstr "" + #: src/bhyve/bhyve_device.c:50 msgid "PCI bus 0 slot 1 is reserved for the implicit LPC PCI-ISA bridge" msgstr "" diff --git a/po/ta.po b/po/ta.po index 61170be..4dfb2df 100644 --- a/po/ta.po +++ b/po/ta.po @@ -919,6 +919,10 @@ msgstr "மூலப் பாதையில்லாத cdrom சாதனம msgid "domain should have at least one disk defined" msgstr "டொமைனுக்கு குறைந்தது ஒரு வட்டேனும் வரையறுக்கப்பட்டிருக்க வேண்டும்" +#: src/bhyve/bhyve_command.c:407 +msgid "Custom loader requires explicit %s configuration" +msgstr "" + #: src/bhyve/bhyve_device.c:50 msgid "PCI bus 0 slot 1 is reserved for the implicit LPC PCI-ISA bridge" msgstr "PCI பஸ் 0 ஸ்லாட் 1 மறைமுக LPC PCI-ISA பிரிட்ஜுக்காக ஒதுக்கப்பட்டது" diff --git a/po/te.po b/po/te.po index 2ad29f3..8d3f27b 100644 --- a/po/te.po +++ b/po/te.po @@ -880,6 +880,10 @@ msgstr "పేరుగల పరికర మారుపేర్లు తో msgid "domain should have at least one disk defined" msgstr "డొమైన్ XML తప్పక వొక <disk> మూలకం కలిగివుండాలి." +#: src/bhyve/bhyve_command.c:407 +msgid "Custom loader requires explicit %s configuration" +msgstr "" + #: src/bhyve/bhyve_device.c:50 msgid "PCI bus 0 slot 1 is reserved for the implicit LPC PCI-ISA bridge" msgstr "" diff --git a/po/th.po b/po/th.po index 8d6c983..ffb4c19 100644 --- a/po/th.po +++ b/po/th.po @@ -853,6 +853,10 @@ msgstr "" msgid "domain should have at least one disk defined" msgstr "" +#: src/bhyve/bhyve_command.c:407 +msgid "Custom loader requires explicit %s configuration" +msgstr "" + #: src/bhyve/bhyve_device.c:50 msgid "PCI bus 0 slot 1 is reserved for the implicit LPC PCI-ISA bridge" msgstr "" diff --git a/po/tr.po b/po/tr.po index 5502581..76b1fad 100644 --- a/po/tr.po +++ b/po/tr.po @@ -853,6 +853,10 @@ msgstr "" msgid "domain should have at least one disk defined" msgstr "" +#: src/bhyve/bhyve_command.c:407 +msgid "Custom loader requires explicit %s configuration" +msgstr "" + #: src/bhyve/bhyve_device.c:50 msgid "PCI bus 0 slot 1 is reserved for the implicit LPC PCI-ISA bridge" msgstr "" diff --git a/po/uk.po b/po/uk.po index ba17e24..36e5338 100644 --- a/po/uk.po +++ b/po/uk.po @@ -923,6 +923,10 @@ msgstr "підтримки пристроїв cdrom без шляху до дж msgid "domain should have at least one disk defined" msgstr "для домену слід визначити принаймні один диск" +#: src/bhyve/bhyve_command.c:407 +msgid "Custom loader requires explicit %s configuration" +msgstr "" + #: src/bhyve/bhyve_device.c:50 msgid "PCI bus 0 slot 1 is reserved for the implicit LPC PCI-ISA bridge" msgstr "Слот 1 каналу PCI 0 зарезервовано для неявного містка LPC PCI-ISA" diff --git a/po/ur.po b/po/ur.po index e15d614..74a926f 100644 --- a/po/ur.po +++ b/po/ur.po @@ -853,6 +853,10 @@ msgstr "" msgid "domain should have at least one disk defined" msgstr "" +#: src/bhyve/bhyve_command.c:407 +msgid "Custom loader requires explicit %s configuration" +msgstr "" + #: src/bhyve/bhyve_device.c:50 msgid "PCI bus 0 slot 1 is reserved for the implicit LPC PCI-ISA bridge" msgstr "" diff --git a/po/vi.po b/po/vi.po index 4974c2c..8f93aaa 100644 --- a/po/vi.po +++ b/po/vi.po @@ -867,6 +867,10 @@ msgstr "lưu trữ bí mật không được hỗ trợ" msgid "domain should have at least one disk defined" msgstr "" +#: src/bhyve/bhyve_command.c:407 +msgid "Custom loader requires explicit %s configuration" +msgstr "" + #: src/bhyve/bhyve_device.c:50 msgid "PCI bus 0 slot 1 is reserved for the implicit LPC PCI-ISA bridge" msgstr "" diff --git a/po/vi_VN.po b/po/vi_VN.po index 1e9af39..2e335bc 100644 --- a/po/vi_VN.po +++ b/po/vi_VN.po @@ -867,6 +867,10 @@ msgstr "lưu trữ bí mật không được hỗ trợ" msgid "domain should have at least one disk defined" msgstr "" +#: src/bhyve/bhyve_command.c:407 +msgid "Custom loader requires explicit %s configuration" +msgstr "" + #: src/bhyve/bhyve_device.c:50 msgid "PCI bus 0 slot 1 is reserved for the implicit LPC PCI-ISA bridge" msgstr "" diff --git a/po/zh_CN.po b/po/zh_CN.po index afc2e3b..a2464e3 100644 --- a/po/zh_CN.po +++ b/po/zh_CN.po @@ -886,6 +886,10 @@ msgstr "不支持命名的设备别名" msgid "domain should have at least one disk defined" msgstr "域 XML 必须包含至少一个 <disk> 元素" +#: src/bhyve/bhyve_command.c:407 +msgid "Custom loader requires explicit %s configuration" +msgstr "" + #: src/bhyve/bhyve_device.c:50 msgid "PCI bus 0 slot 1 is reserved for the implicit LPC PCI-ISA bridge" msgstr "" diff --git a/po/zh_TW.po b/po/zh_TW.po index 812901c..b034bb8 100644 --- a/po/zh_TW.po +++ b/po/zh_TW.po @@ -859,6 +859,10 @@ msgstr "" msgid "domain should have at least one disk defined" msgstr "" +#: src/bhyve/bhyve_command.c:407 +msgid "Custom loader requires explicit %s configuration" +msgstr "" + #: src/bhyve/bhyve_device.c:50 msgid "PCI bus 0 slot 1 is reserved for the implicit LPC PCI-ISA bridge" msgstr "" diff --git a/po/zu.po b/po/zu.po index 8a04324..83f3147 100644 --- a/po/zu.po +++ b/po/zu.po @@ -853,6 +853,10 @@ msgstr "" msgid "domain should have at least one disk defined" msgstr "" +#: src/bhyve/bhyve_command.c:407 +msgid "Custom loader requires explicit %s configuration" +msgstr "" + #: src/bhyve/bhyve_device.c:50 msgid "PCI bus 0 slot 1 is reserved for the implicit LPC PCI-ISA bridge" msgstr "" -- 1.9.3