From: "Daniel P. Berrange" <berrange(a)redhat.com&gt; The qemuMonitorHMPCommand() API and things it calls will report a wide variety of errors. The QEMU text monitor should not be overwriting these errors Signed-off-by: Daniel P. Berrange <berrange(a)redhat.com&gt; --- src/qemu/qemu_monitor_text.c | 335 ++++++++++--------------------------------- 1 file changed, 76 insertions(+), 259 deletions(-) diff --git a/src/qemu/qemu_monitor_text.c b/src/qemu/qemu_monitor_text.c index a575e30..f7b88a7 100644 --- a/src/qemu/qemu_monitor_text.c +++ b/src/qemu/qemu_monitor_text.c @@ -387,14 +387,11 @@ qemuMonitorTextStartCPUs(qemuMonitorPtr mon, int qemuMonitorTextStopCPUs(qemuMonitorPtr mon) { char *info; + int ret; - if (qemuMonitorHMPCommand(mon, "stop", &info) < 0) { - virReportError(VIR_ERR_OPERATION_FAILED, - "%s", _("cannot stop CPU execution")); - return -1; - } + ret = qemuMonitorHMPCommand(mon, "stop", &info); VIR_FREE(info); - return 0; + return ret; } @@ -409,11 +406,8 @@ qemuMonitorTextGetStatus(qemuMonitorPtr mon, if (reason) *reason = VIR_DOMAIN_PAUSED_UNKNOWN; - if (qemuMonitorHMPCommand(mon, "info status", &reply) < 0) { - virReportError(VIR_ERR_OPERATION_FAILED, - "%s", _("cannot get status info")); + if (qemuMonitorHMPCommand(mon, "info status", &reply) < 0) return -1; - } if (strstr(reply, "running")) { *running = true; @@ -448,14 +442,12 @@ cleanup: int qemuMonitorTextSystemPowerdown(qemuMonitorPtr mon) { char *info; + int ret; + + ret = qemuMonitorHMPCommand(mon, "system_powerdown", &info); - if (qemuMonitorHMPCommand(mon, "system_powerdown", &info) < 0) { - virReportError(VIR_ERR_OPERATION_FAILED, - "%s", _("system shutdown operation failed")); - return -1; - } VIR_FREE(info); - return 0; + return ret; } int qemuMonitorTextSetLink(qemuMonitorPtr mon, const char *name, enum virDomainNetInterfaceLinkState state) { @@ -473,11 +465,8 @@ int qemuMonitorTextSetLink(qemuMonitorPtr mon, const char *name, enum virDomainN virReportOOMError(); goto error; } - if (qemuMonitorHMPCommand(mon, cmd, &info) < 0) { - virReportError(VIR_ERR_OPERATION_FAILED, - "%s", _("set_link operation failed")); + if (qemuMonitorHMPCommand(mon, cmd, &info) < 0) goto error; - } /* check if set_link command is supported */ if (strstr(info, "\nunknown ")) { @@ -507,14 +496,12 @@ error: int qemuMonitorTextSystemReset(qemuMonitorPtr mon) { char *info; + int ret; + + ret = qemuMonitorHMPCommand(mon, "system_reset", &info); - if (qemuMonitorHMPCommand(mon, "system_reset", &info) < 0) { - virReportError(VIR_ERR_OPERATION_FAILED, - "%s", _("system reset operation failed")); - return -1; - } VIR_FREE(info); - return 0; + return ret; } @@ -527,11 +514,8 @@ int qemuMonitorTextGetCPUInfo(qemuMonitorPtr mon, pid_t *cpupids = NULL; size_t ncpupids = 0; - if (qemuMonitorHMPCommand(mon, "info cpus", &qemucpus) < 0) { - virReportError(VIR_ERR_INTERNAL_ERROR, - "%s", _("cannot run monitor command to fetch CPU thread info")); + if (qemuMonitorHMPCommand(mon, "info cpus", &qemucpus) < 0) return -1; - } /* * This is the gross format we're about to parse :-{ @@ -608,11 +592,8 @@ int qemuMonitorTextGetVirtType(qemuMonitorPtr mon, *virtType = VIR_DOMAIN_VIRT_QEMU; - if (qemuMonitorHMPCommand(mon, "info kvm", &reply) < 0) { - virReportError(VIR_ERR_OPERATION_FAILED, - "%s", _("could not query kvm status")); + if (qemuMonitorHMPCommand(mon, "info kvm", &reply) < 0) return -1; - } if (strstr(reply, "enabled")) *virtType = VIR_DOMAIN_VIRT_KVM; @@ -715,11 +696,8 @@ int qemuMonitorTextGetBalloonInfo(qemuMonitorPtr mon, int ret = -1; char *offset; - if (qemuMonitorHMPCommand(mon, "info balloon", &reply) < 0) { - virReportError(VIR_ERR_OPERATION_FAILED, - "%s", _("could not query memory balloon allocation")); + if (qemuMonitorHMPCommand(mon, "info balloon", &reply) < 0) return -1; - } if ((offset = strstr(reply, BALLOON_PREFIX)) != NULL) { offset += strlen(BALLOON_PREFIX); @@ -759,11 +737,8 @@ int qemuMonitorTextGetMemoryStats(qemuMonitorPtr mon, int ret = 0; char *offset; - if (qemuMonitorHMPCommand(mon, "info balloon", &reply) < 0) { - virReportError(VIR_ERR_OPERATION_FAILED, - "%s", _("could not query memory balloon statistics")); + if (qemuMonitorHMPCommand(mon, "info balloon", &reply) < 0) return -1; - } if ((offset = strstr(reply, BALLOON_PREFIX)) != NULL) { offset += strlen(BALLOON_PREFIX); @@ -786,11 +761,8 @@ int qemuMonitorTextGetBlockInfo(qemuMonitorPtr mon, char *dev; int tmp; - if (qemuMonitorHMPCommand(mon, "info block", &reply) < 0) { - virReportError(VIR_ERR_OPERATION_FAILED, - "%s", _("info block command failed")); + if (qemuMonitorHMPCommand(mon, "info block", &reply) < 0) goto cleanup; - } if (strstr(reply, "\ninfo ")) { virReportError(VIR_ERR_OPERATION_INVALID, @@ -905,11 +877,8 @@ int qemuMonitorTextGetBlockStatsInfo(qemuMonitorPtr mon, const char *p, *eol; int devnamelen = strlen(dev_name); - if (qemuMonitorHMPCommand (mon, "info blockstats", &info) < 0) { - virReportError(VIR_ERR_OPERATION_FAILED, - "%s", _("'info blockstats' command failed")); + if (qemuMonitorHMPCommand (mon, "info blockstats", &info) < 0) goto cleanup; - } /* If the command isn't supported then qemu prints the supported * info commands, so the output starts "info ". Since this is @@ -1032,11 +1001,8 @@ int qemuMonitorTextGetBlockStatsParamsNumber(qemuMonitorPtr mon, int num = 0; const char *p, *eol; - if (qemuMonitorHMPCommand (mon, "info blockstats", &info) < 0) { - virReportError(VIR_ERR_OPERATION_FAILED, - "%s", _("'info blockstats' command failed")); + if (qemuMonitorHMPCommand (mon, "info blockstats", &info) < 0) goto cleanup; - } /* If the command isn't supported then qemu prints the supported * info commands, so the output starts "info ". Since this is @@ -1116,11 +1082,8 @@ int qemuMonitorTextBlockResize(qemuMonitorPtr mon, goto cleanup; } - if (qemuMonitorHMPCommand(mon, cmd, &reply) < 0) { - virReportError(VIR_ERR_OPERATION_FAILED, - "%s", _("failed to resize block")); + if (qemuMonitorHMPCommand(mon, cmd, &reply) < 0) goto cleanup; - } if (strstr(reply, "unknown command:")) { ret = -2; @@ -1197,11 +1160,8 @@ int qemuMonitorTextSetPassword(qemuMonitorPtr mon, goto cleanup; } - if (qemuMonitorHMPCommand(mon, cmd, &reply) < 0) { - virReportError(VIR_ERR_OPERATION_FAILED, - "%s", _("setting password failed")); + if (qemuMonitorHMPCommand(mon, cmd, &reply) < 0) goto cleanup; - } if (strstr(reply, "unknown command:")) { ret = -2; @@ -1231,11 +1191,8 @@ int qemuMonitorTextExpirePassword(qemuMonitorPtr mon, goto cleanup; } - if (qemuMonitorHMPCommand(mon, cmd, &reply) < 0) { - virReportError(VIR_ERR_OPERATION_FAILED, - "%s", _("expiring password failed")); + if (qemuMonitorHMPCommand(mon, cmd, &reply) < 0) goto cleanup; - } if (strstr(reply, "unknown command:")) { ret = -2; @@ -1271,8 +1228,6 @@ int qemuMonitorTextSetBalloon(qemuMonitorPtr mon, } if (qemuMonitorHMPCommand(mon, cmd, &reply) < 0) { - virReportError(VIR_ERR_OPERATION_FAILED, - "%s", _("could not balloon memory allocation")); VIR_FREE(cmd); return -1; } @@ -1308,8 +1263,6 @@ int qemuMonitorTextSetCPU(qemuMonitorPtr mon, int cpu, int online) } if (qemuMonitorHMPCommand(mon, cmd, &reply) < 0) { - virReportError(VIR_ERR_OPERATION_FAILED, - "%s", _("could not change CPU online status")); VIR_FREE(cmd); return -1; } @@ -1342,11 +1295,8 @@ int qemuMonitorTextEjectMedia(qemuMonitorPtr mon, goto cleanup; } - if (qemuMonitorHMPCommand(mon, cmd, &reply) < 0) { - virReportError(VIR_ERR_OPERATION_FAILED, - _("could not eject media on %s"), dev_name); + if (qemuMonitorHMPCommand(mon, cmd, &reply) < 0) goto cleanup; - } /* If the command failed qemu prints: * device not found, device is locked ... @@ -1386,11 +1336,8 @@ int qemuMonitorTextChangeMedia(qemuMonitorPtr mon, goto cleanup; } - if (qemuMonitorHMPCommand(mon, cmd, &reply) < 0) { - virReportError(VIR_ERR_OPERATION_FAILED, - _("could not change media on %s"), dev_name); + if (qemuMonitorHMPCommand(mon, cmd, &reply) < 0) goto cleanup; - } /* If the command failed qemu prints: * device not found, device is locked ... @@ -1438,11 +1385,8 @@ static int qemuMonitorTextSaveMemory(qemuMonitorPtr mon, goto cleanup; } - if (qemuMonitorHMPCommand(mon, cmd, &reply) < 0) { - virReportError(VIR_ERR_OPERATION_FAILED, - _("could not save memory region to '%s'"), path); + if (qemuMonitorHMPCommand(mon, cmd, &reply) < 0) goto cleanup; - } /* XXX what is printed on failure ? */ @@ -1485,11 +1429,8 @@ int qemuMonitorTextSetMigrationSpeed(qemuMonitorPtr mon, goto cleanup; } - if (qemuMonitorHMPCommand(mon, cmd, &info) < 0) { - virReportError(VIR_ERR_OPERATION_FAILED, - "%s", _("could not restrict migration speed")); + if (qemuMonitorHMPCommand(mon, cmd, &info) < 0) goto cleanup; - } ret = 0; @@ -1512,11 +1453,8 @@ int qemuMonitorTextSetMigrationDowntime(qemuMonitorPtr mon, goto cleanup; } - if (qemuMonitorHMPCommand(mon, cmd, &info) < 0) { - virReportError(VIR_ERR_OPERATION_FAILED, - "%s", _("could not set maximum migration downtime")); + if (qemuMonitorHMPCommand(mon, cmd, &info) < 0) goto cleanup; - } ret = 0; @@ -1553,11 +1491,8 @@ int qemuMonitorTextGetMigrationStatus(qemuMonitorPtr mon, *remaining = 0; *total = 0; - if (qemuMonitorHMPCommand(mon, "info migrate", &reply) < 0) { - virReportError(VIR_ERR_OPERATION_FAILED, - "%s", _("cannot query migration status")); + if (qemuMonitorHMPCommand(mon, "info migrate", &reply) < 0) return -1; - } if ((tmp = strstr(reply, MIGRATION_PREFIX)) != NULL) { tmp += strlen(MIGRATION_PREFIX); @@ -1704,11 +1639,8 @@ int qemuMonitorTextMigrate(qemuMonitorPtr mon, goto cleanup; } - if (qemuMonitorHMPCommand(mon, cmd, &info) < 0) { - virReportError(VIR_ERR_INTERNAL_ERROR, - _("unable to start migration to %s"), dest); + if (qemuMonitorHMPCommand(mon, cmd, &info) < 0) goto cleanup; - } /* Now check for "fail" in the output string */ if (strstr(info, "fail") != NULL) { @@ -1738,15 +1670,12 @@ cleanup: int qemuMonitorTextMigrateCancel(qemuMonitorPtr mon) { char *info = NULL; + int ret; - if (qemuMonitorHMPCommand(mon, "migrate_cancel", &info) < 0) { - virReportError(VIR_ERR_INTERNAL_ERROR, - "%s", _("cannot run monitor command to cancel migration")); - return -1; - } - VIR_FREE(info); + ret = qemuMonitorHMPCommand(mon, "migrate_cancel", &info); - return 0; + VIR_FREE(info); + return ret; } @@ -1769,8 +1698,6 @@ int qemuMonitorTextGraphicsRelocate(qemuMonitorPtr mon, if (qemuMonitorHMPCommand(mon, cmd, &info) < 0) { VIR_FREE(cmd); - virReportError(VIR_ERR_INTERNAL_ERROR, - "%s", _("cannot run monitor command to relocate graphics client")); return -1; } VIR_FREE(cmd); @@ -1799,11 +1726,8 @@ int qemuMonitorTextAddUSBDisk(qemuMonitorPtr mon, goto cleanup; } - if (qemuMonitorHMPCommand(mon, cmd, &info) < 0) { - virReportError(VIR_ERR_INTERNAL_ERROR, - "%s", _("cannot run monitor command to add usb disk")); + if (qemuMonitorHMPCommand(mon, cmd, &info) < 0) goto cleanup; - } /* If the command failed qemu prints: * Could not add ... */ @@ -1835,11 +1759,8 @@ static int qemuMonitorTextAddUSBDevice(qemuMonitorPtr mon, return -1; } - if (qemuMonitorHMPCommand(mon, cmd, &reply) < 0) { - virReportError(VIR_ERR_OPERATION_FAILED, - "%s", _("cannot attach usb device")); + if (qemuMonitorHMPCommand(mon, cmd, &reply) < 0) goto cleanup; - } /* If the command failed qemu prints: * Could not add ... */ @@ -1976,11 +1897,8 @@ int qemuMonitorTextAddPCIHostDevice(qemuMonitorPtr mon, goto cleanup; } - if (qemuMonitorHMPCommand(mon, cmd, &reply) < 0) { - virReportError(VIR_ERR_OPERATION_FAILED, - "%s", _("cannot attach host pci device")); + if (qemuMonitorHMPCommand(mon, cmd, &reply) < 0) goto cleanup; - } if (strstr(reply, "invalid type: host")) { virReportError(VIR_ERR_OPERATION_INVALID, "%s", @@ -2027,11 +1945,8 @@ try_command: goto cleanup; } - if (qemuMonitorHMPCommand(mon, cmd, &reply) < 0) { - virReportError(VIR_ERR_OPERATION_FAILED, - _("cannot attach %s disk %s"), bus, path); + if (qemuMonitorHMPCommand(mon, cmd, &reply) < 0) goto cleanup; - } if (qemuMonitorTextParsePciAddReply(mon, reply, guestAddr) < 0) { if (!tryOldSyntax && strstr(reply, "invalid char in expression")) { @@ -2069,11 +1984,8 @@ int qemuMonitorTextAddPCINetwork(qemuMonitorPtr mon, return -1; } - if (qemuMonitorHMPCommand(mon, cmd, &reply) < 0) { - virReportError(VIR_ERR_OPERATION_FAILED, - _("failed to add NIC with '%s'"), cmd); + if (qemuMonitorHMPCommand(mon, cmd, &reply) < 0) goto cleanup; - } if (qemuMonitorTextParsePciAddReply(mon, reply, guestAddr) < 0) { virReportError(VIR_ERR_OPERATION_FAILED, @@ -2113,11 +2025,8 @@ try_command: } } - if (qemuMonitorHMPCommand(mon, cmd, &reply) < 0) { - virReportError(VIR_ERR_OPERATION_FAILED, - "%s", _("failed to remove PCI device")); + if (qemuMonitorHMPCommand(mon, cmd, &reply) < 0) goto cleanup; - } /* Syntax changed when KVM merged PCI hotplug upstream to QEMU, * so check for an error message from old KVM indicating the @@ -2161,11 +2070,8 @@ int qemuMonitorTextSendFileHandle(qemuMonitorPtr mon, return -1; } - if (qemuMonitorHMPCommandWithFd(mon, cmd, fd, &reply) < 0) { - virReportError(VIR_ERR_OPERATION_FAILED, - _("failed to pass fd to qemu with '%s'"), cmd); + if (qemuMonitorHMPCommandWithFd(mon, cmd, fd, &reply) < 0) goto cleanup; - } /* If the command isn't supported then qemu prints: * unknown command: getfd" */ @@ -2204,11 +2110,8 @@ int qemuMonitorTextCloseFileHandle(qemuMonitorPtr mon, return -1; } - if (qemuMonitorHMPCommand(mon, cmd, &reply) < 0) { - virReportError(VIR_ERR_OPERATION_FAILED, - _("failed to close fd in qemu with '%s'"), cmd); + if (qemuMonitorHMPCommand(mon, cmd, &reply) < 0) goto cleanup; - } /* If the command isn't supported then qemu prints: * unknown command: getfd" */ @@ -2240,11 +2143,8 @@ int qemuMonitorTextAddHostNetwork(qemuMonitorPtr mon, return -1; } - if (qemuMonitorHMPCommand(mon, cmd, &reply) < 0) { - virReportError(VIR_ERR_OPERATION_FAILED, - _("failed to add host net with '%s'"), cmd); + if (qemuMonitorHMPCommand(mon, cmd, &reply) < 0) goto cleanup; - } if (STRNEQ(reply, "")) { virReportError(VIR_ERR_INTERNAL_ERROR, @@ -2275,11 +2175,8 @@ int qemuMonitorTextRemoveHostNetwork(qemuMonitorPtr mon, return -1; } - if (qemuMonitorHMPCommand(mon, cmd, &reply) < 0) { - virReportError(VIR_ERR_OPERATION_FAILED, - _("failed to remove host network in qemu with '%s'"), cmd); + if (qemuMonitorHMPCommand(mon, cmd, &reply) < 0) goto cleanup; - } /* XXX error messages here ? */ @@ -2304,11 +2201,8 @@ int qemuMonitorTextAddNetdev(qemuMonitorPtr mon, return -1; } - if (qemuMonitorHMPCommand(mon, cmd, &reply) < 0) { - virReportError(VIR_ERR_OPERATION_FAILED, - _("failed to add netdev with '%s'"), cmd); + if (qemuMonitorHMPCommand(mon, cmd, &reply) < 0) goto cleanup; - } /* XXX error messages here ? */ @@ -2333,11 +2227,8 @@ int qemuMonitorTextRemoveNetdev(qemuMonitorPtr mon, return -1; } - if (qemuMonitorHMPCommand(mon, cmd, &reply) < 0) { - virReportError(VIR_ERR_OPERATION_FAILED, - _("failed to remove netdev in qemu with '%s'"), cmd); + if (qemuMonitorHMPCommand(mon, cmd, &reply) < 0) goto cleanup; - } /* XXX error messages here ? */ @@ -2368,11 +2259,8 @@ int qemuMonitorTextGetPtyPaths(qemuMonitorPtr mon, char *reply = NULL; int ret = -1; - if (qemuMonitorHMPCommand(mon, "info chardev", &reply) < 0) { - virReportError(VIR_ERR_OPERATION_FAILED, "%s", - _("failed to retrieve chardev info in qemu with 'info chardev'")); + if (qemuMonitorHMPCommand(mon, "info chardev", &reply) < 0) return -1; - } char *pos; /* The current start of searching */ char *next = reply; /* The start of the next line */ @@ -2453,11 +2341,8 @@ try_command: goto cleanup; } - if (qemuMonitorHMPCommand(mon, cmd, &reply) < 0) { - virReportError(VIR_ERR_OPERATION_FAILED, - _("cannot attach %s disk controller"), bus); + if (qemuMonitorHMPCommand(mon, cmd, &reply) < 0) goto cleanup; - } if (qemuMonitorTextParsePciAddReply(mon, reply, guestAddr) < 0) { if (!tryOldSyntax && strstr(reply, "invalid char in expression")) { @@ -2552,11 +2437,8 @@ try_command: goto cleanup; } - if (qemuMonitorHMPCommand(mon, cmd, &reply) < 0) { - virReportError(VIR_ERR_OPERATION_FAILED, - _("failed to attach drive '%s'"), drivestr); + if (qemuMonitorHMPCommand(mon, cmd, &reply) < 0) goto cleanup; - } if (strstr(reply, "unknown command:")) { virReportError(VIR_ERR_OPERATION_FAILED, "%s", @@ -2643,11 +2525,8 @@ int qemuMonitorTextGetAllPCIAddresses(qemuMonitorPtr mon, *retaddrs = NULL; - if (qemuMonitorHMPCommand(mon, "info pci", &reply) < 0) { - virReportError(VIR_ERR_OPERATION_FAILED, - "%s", _("cannot query PCI addresses")); + if (qemuMonitorHMPCommand(mon, "info pci", &reply) < 0) return -1; - } p = reply; @@ -2736,11 +2615,8 @@ int qemuMonitorTextDelDevice(qemuMonitorPtr mon, } VIR_DEBUG("TextDelDevice devalias=%s", devalias); - if (qemuMonitorHMPCommand(mon, cmd, &reply) < 0) { - virReportError(VIR_ERR_OPERATION_FAILED, - _("cannot detach %s device"), devalias); + if (qemuMonitorHMPCommand(mon, cmd, &reply) < 0) goto cleanup; - } if (STRNEQ(reply, "")) { virReportError(VIR_ERR_OPERATION_FAILED, @@ -2776,11 +2652,8 @@ int qemuMonitorTextAddDevice(qemuMonitorPtr mon, goto cleanup; } - if (qemuMonitorHMPCommand(mon, cmd, &reply) < 0) { - virReportError(VIR_ERR_OPERATION_FAILED, - _("cannot attach %s device"), devicestr); + if (qemuMonitorHMPCommand(mon, cmd, &reply) < 0) goto cleanup; - } /* If the host device is hotpluged first time, qemu will output * husb: using %s file-system with %s if the command succeeds. @@ -2829,11 +2702,8 @@ int qemuMonitorTextAddDrive(qemuMonitorPtr mon, goto cleanup; } - if (qemuMonitorHMPCommand(mon, cmd, &reply) < 0) { - virReportError(VIR_ERR_OPERATION_FAILED, - _("failed to add drive '%s'"), drivestr); + if (qemuMonitorHMPCommand(mon, cmd, &reply) < 0) goto cleanup; - } if (strstr(reply, "unknown command:")) { virReportError(VIR_ERR_OPERATION_FAILED, "%s", @@ -2877,11 +2747,8 @@ int qemuMonitorTextDriveDel(qemuMonitorPtr mon, goto cleanup; } - if (qemuMonitorHMPCommand(mon, cmd, &reply) < 0) { - virReportError(VIR_ERR_OPERATION_FAILED, - _("cannot delete %s drive"), drivestr); + if (qemuMonitorHMPCommand(mon, cmd, &reply) < 0) goto cleanup; - } if (strstr(reply, "unknown command:")) { VIR_ERROR(_("deleting drive is not supported. " @@ -2930,11 +2797,8 @@ int qemuMonitorTextSetDrivePassphrase(qemuMonitorPtr mon, goto cleanup; } - if (qemuMonitorHMPCommand(mon, cmd, &reply) < 0) { - virReportError(VIR_ERR_OPERATION_FAILED, "%s", - _("failed to set disk password")); + if (qemuMonitorHMPCommand(mon, cmd, &reply) < 0) goto cleanup; - } if (strstr(reply, "unknown command:")) { virReportError(VIR_ERR_OPERATION_FAILED, "%s", @@ -2968,11 +2832,8 @@ int qemuMonitorTextCreateSnapshot(qemuMonitorPtr mon, const char *name) goto cleanup; } - if (qemuMonitorHMPCommand(mon, cmd, &reply)) { - virReportError(VIR_ERR_OPERATION_FAILED, - _("failed to take snapshot using command '%s'"), cmd); + if (qemuMonitorHMPCommand(mon, cmd, &reply)) goto cleanup; - } if (strstr(reply, "Error while creating snapshot") != NULL) { virReportError(VIR_ERR_OPERATION_FAILED, @@ -3016,12 +2877,8 @@ int qemuMonitorTextLoadSnapshot(qemuMonitorPtr mon, const char *name) goto cleanup; } - if (qemuMonitorHMPCommand(mon, cmd, &reply)) { - virReportError(VIR_ERR_OPERATION_FAILED, - _("failed to restore snapshot using command '%s'"), - cmd); + if (qemuMonitorHMPCommand(mon, cmd, &reply)) goto cleanup; - } if (strstr(reply, "No block device supports snapshots") != NULL) { virReportError(VIR_ERR_OPERATION_INVALID, "%s", @@ -3074,12 +2931,8 @@ int qemuMonitorTextDeleteSnapshot(qemuMonitorPtr mon, const char *name) virReportOOMError(); goto cleanup; } - if (qemuMonitorHMPCommand(mon, cmd, &reply)) { - virReportError(VIR_ERR_OPERATION_FAILED, - _("failed to delete snapshot using command '%s'"), - cmd); + if (qemuMonitorHMPCommand(mon, cmd, &reply)) goto cleanup; - } if (strstr(reply, "No block device supports snapshots") != NULL) { virReportError(VIR_ERR_OPERATION_INVALID, "%s", @@ -3120,11 +2973,8 @@ qemuMonitorTextDiskSnapshot(qemuMonitorPtr mon, const char *device, goto cleanup; } - if (qemuMonitorHMPCommand(mon, cmd, &reply)) { - virReportError(VIR_ERR_OPERATION_FAILED, - _("failed to take snapshot using command '%s'"), cmd); + if (qemuMonitorHMPCommand(mon, cmd, &reply)) goto cleanup; - } if (strstr(reply, "error while creating qcow2") != NULL || strstr(reply, "unknown command:") != NULL) { @@ -3158,9 +3008,6 @@ int qemuMonitorTextArbitraryCommand(qemuMonitorPtr mon, const char *cmd, } ret = qemuMonitorHMPCommand(mon, safecmd, reply); - if (ret != 0) - virReportError(VIR_ERR_OPERATION_FAILED, - _("failed to run cmd '%s'"), safecmd); VIR_FREE(safecmd); @@ -3169,30 +3016,21 @@ int qemuMonitorTextArbitraryCommand(qemuMonitorPtr mon, const char *cmd, int qemuMonitorTextInjectNMI(qemuMonitorPtr mon) { - const char *cmd = "inject-nmi"; char *reply = NULL; - if (qemuMonitorHMPCommand(mon, cmd, &reply) < 0) - goto fail; + if (qemuMonitorHMPCommand(mon, "inject-nmi", &reply) < 0) + return -1; if (strstr(reply, "unknown command") != NULL) { VIR_FREE(reply); /* fallback to 'nmi' if qemu has not supported "inject-nmi" yet. */ - cmd = "nmi 0"; - reply = NULL; - if (qemuMonitorHMPCommand(mon, cmd, &reply) < 0) - goto fail; + if (qemuMonitorHMPCommand(mon, "nmi 0", &reply) < 0) + return -1; } VIR_FREE(reply); return 0; - -fail: - virReportError(VIR_ERR_OPERATION_FAILED, - _("failed to inject NMI using command '%s'"), - cmd); - return -1; } int qemuMonitorTextSendKey(qemuMonitorPtr mon, @@ -3232,12 +3070,8 @@ int qemuMonitorTextSendKey(qemuMonitorPtr mon, } cmd = virBufferContentAndReset(&buf); - if (qemuMonitorHMPCommand(mon, cmd, &reply) < 0) { - virReportError(VIR_ERR_OPERATION_FAILED, - _("failed to send key using command '%s'"), - cmd); + if (qemuMonitorHMPCommand(mon, cmd, &reply) < 0) goto cleanup; - } if (STRNEQ(reply, "")) { virReportError(VIR_ERR_OPERATION_FAILED, @@ -3265,11 +3099,8 @@ int qemuMonitorTextScreendump(qemuMonitorPtr mon, const char *file) goto cleanup; } - if (qemuMonitorHMPCommand(mon, cmd, &reply) < 0) { - virReportError(VIR_ERR_OPERATION_FAILED, - "%s", _("taking screenshot failed")); + if (qemuMonitorHMPCommand(mon, cmd, &reply) < 0) goto cleanup; - } if (strstr(reply, "unknown command:")) { ret = -2; @@ -3299,11 +3130,8 @@ int qemuMonitorTextOpenGraphics(qemuMonitorPtr mon, goto cleanup; } - if (qemuMonitorHMPCommand(mon, cmd, &reply) < 0) { - virReportError(VIR_ERR_OPERATION_FAILED, - "%s", _("adding graphics client failed")); + if (qemuMonitorHMPCommand(mon, cmd, &reply) < 0) goto cleanup; - } if (STRNEQ(reply, "")) goto cleanup; @@ -3323,34 +3151,28 @@ int qemuMonitorTextSetBlockIoThrottle(qemuMonitorPtr mon, { char *cmd = NULL; char *result = NULL; - int ret = 0; + int ret = -1; const char *cmd_name = NULL; /* For the not specified fields, 0 by default */ cmd_name = "block_set_io_throttle"; - ret = virAsprintf(&cmd, "%s %s %llu %llu %llu %llu %llu %llu", cmd_name, - device, info->total_bytes_sec, info->read_bytes_sec, - info->write_bytes_sec, info->total_iops_sec, - info->read_iops_sec, info->write_iops_sec); - - if (ret < 0) { + if (virAsprintf(&cmd, "%s %s %llu %llu %llu %llu %llu %llu", cmd_name, + device, info->total_bytes_sec, info->read_bytes_sec, + info->write_bytes_sec, info->total_iops_sec, + info->read_iops_sec, info->write_iops_sec) < 0) { virReportOOMError(); - return -1; + goto cleanup; } - if (qemuMonitorHMPCommand(mon, cmd, &result) < 0) { - virReportError(VIR_ERR_INTERNAL_ERROR, - "%s", _("cannot run monitor command")); - ret = -1; + if (qemuMonitorHMPCommand(mon, cmd, &result) < 0) goto cleanup; - } if (qemuMonitorTextCommandNotFound(cmd_name, result)) { virReportError(VIR_ERR_OPERATION_INVALID, _("Command '%s' is not found"), cmd_name); - ret = -1; goto cleanup; } + ret = 0; cleanup: VIR_FREE(cmd); @@ -3441,20 +3263,15 @@ int qemuMonitorTextGetBlockIoThrottle(qemuMonitorPtr mon, virDomainBlockIoTuneInfoPtr reply) { char *result = NULL; - int ret = 0; + int ret = -1; const char *cmd_name = "info block"; - if (qemuMonitorHMPCommand(mon, cmd_name, &result) < 0) { - virReportError(VIR_ERR_INTERNAL_ERROR, - "%s", _("cannot run monitor command")); - ret = -1; + if (qemuMonitorHMPCommand(mon, cmd_name, &result) < 0) goto cleanup; - } if (qemuMonitorTextCommandNotFound(cmd_name, result)) { virReportError(VIR_ERR_OPERATION_INVALID, _("Command '%s' is not found"), cmd_name); - ret = -1; goto cleanup; } -- 1.7.11.4