From: Dario Faggioli <dfaggioli(a)suse.com&gt; This patch introduces the <maxphysaddr mode='passthrough'/> <maxphysaddr mode='emulate' bits='42'/> sub element of /domain/cpu, which allows specifying the guest virtual CPU address size. This can be useful if the guest needs to have a large amount of memory. If mode='passthrough', the virtual CPU will have the same number of address bits as the host. If mode='emulate', the mandatory bits attribute specifies the number of address bits. Signed-off-by: Dario Faggioli <dfaggioli(a)suse.com&gt; Signed-off-by: Jim Fehlig <jfehlig(a)suse.com&gt; --- docs/formatdomain.rst | 23 ++++++++ src/conf/cpu_conf.c | 54 +++++++++++++++++++ src/conf/cpu_conf.h | 17 ++++++ src/conf/schemas/cputypes.rng | 19 +++++++ src/libvirt_private.syms | 2 + .../cpu-phys-bits-emulate.xml | 20 +++++++ .../cpu-phys-bits-passthrough.xml | 20 +++++++ tests/genericxml2xmltest.c | 3 ++ 8 files changed, 158 insertions(+) diff --git a/docs/formatdomain.rst b/docs/formatdomain.rst index 1ed969ac3e..adfdd7b7a5 100644 --- a/docs/formatdomain.rst +++ b/docs/formatdomain.rst @@ -1336,6 +1336,7 @@ following collection of elements. :since:`Since 0.7.5` <vendor>Intel</vendor> <topology sockets='1' dies='1' cores='2' threads='1'/> <cache level='3' mode='emulate'/> + <maxphysaddr mode='emulate' bits='42'> <feature policy='disable' name='lahf_lm'/> </cpu> ... @@ -1352,6 +1353,7 @@ following collection of elements. :since:`Since 0.7.5` <cpu mode='host-passthrough' migratable='off'> <cache mode='passthrough'/> + <maxphysaddr mode='passthrough'> <feature policy='disable' name='lahf_lm'/> ... @@ -1600,6 +1602,27 @@ In case no restrictions need to be put on CPU model and its features, a simpler The virtual CPU will report no CPU cache of the specified level (or no cache at all if the ``level`` attribute is missing). +``maxphysaddr`` + :since:`Since 8.7.0` the ``maxphysaddr`` element describes the virtual CPU + address size in bits. The hypervisor default is used if the element is missing. + + ``mode`` + This mandatory attribute specifies how the address size is presented. The + follow modes are supported: + + ``passthrough`` + The number of physical address bits reported by the host CPU will be + passed through to the virtual CPUs + ``emulate`` + The hypervisor will define a specific value for the number of bits + of physical addresses via the ``bits`` attribute, which is mandatory. + The number of bits cannot exceed the number of physical address bits + supported by the hypervisor. + + ``bits`` + The ``bits`` attribute is mandatory if the ``mode`` attribute is set to + ``emulate`` and specifies the virtual CPU address size in bits. + Guest NUMA topology can be specified using the ``numa`` element. :since:`Since 0.9.8` diff --git a/src/conf/cpu_conf.c b/src/conf/cpu_conf.c index 8d80bbd842..e31c4ab467 100644 --- a/src/conf/cpu_conf.c +++ b/src/conf/cpu_conf.c @@ -82,6 +82,12 @@ VIR_ENUM_IMPL(virCPUCacheMode, "disable", ); +VIR_ENUM_IMPL(virCPUMaxPhysAddrMode, + VIR_CPU_MAX_PHYS_ADDR_MODE_LAST, + "emulate", + "passthrough", +); + virCPUDef *virCPUDefNew(void) { @@ -127,6 +133,7 @@ virCPUDefFree(virCPUDef *def) if (g_atomic_int_dec_and_test(&def->refs)) { virCPUDefFreeModel(def); g_free(def->cache); + g_free(def->addr); g_free(def->tsc); g_free(def); } @@ -252,6 +259,11 @@ virCPUDefCopyWithoutModel(const virCPUDef *cpu) *copy->cache = *cpu->cache; } + if (cpu->addr) { + copy->addr = g_new0(virCPUMaxPhysAddrDef, 1); + *copy->addr = *cpu->addr; + } + if (cpu->tsc) { copy->tsc = g_new0(virHostCPUTscInfo, 1); *copy->tsc = *cpu->tsc; @@ -644,6 +656,39 @@ virCPUDefParseXML(xmlXPathContextPtr ctxt, def->cache->mode = mode; } + if (virXPathInt("count(./maxphysaddr)", ctxt, &n) < 0) { + return -1; + } else if (n > 1) { + virReportError(VIR_ERR_XML_ERROR, "%s", + _("at most one CPU maximum physical address bits " + "element may be specified")); + return -1; + } else if (n == 1) { + g_autofree char *strmode = NULL; + int mode; + int bits = -1; + + if (!(strmode = virXPathString("string(./maxphysaddr[1]/@mode)", ctxt)) || + (mode = virCPUMaxPhysAddrModeTypeFromString(strmode)) < 0) { + virReportError(VIR_ERR_XML_ERROR, "%s", + _("missing or invalid CPU maximum physical " + "address bits mode")); + return -1; + } + + if (virXPathBoolean("boolean(./maxphysaddr[1]/@bits)", ctxt) == 1 && + (virXPathInt("string(./maxphysaddr[1]/@bits)", ctxt, &bits) < 0 || + bits < 0)) { + virReportError(VIR_ERR_XML_ERROR, "%s", + _("CPU maximum physical address bits < 0")); + return -1; + } + + def->addr = g_new0(virCPUMaxPhysAddrDef, 1); + def->addr->bits = bits; + def->addr->mode = mode; + } + *cpu = g_steal_pointer(&def); return 0; } @@ -811,6 +856,15 @@ virCPUDefFormatBuf(virBuffer *buf, virBufferAddLit(buf, "/>\n"); } + if (def->addr) { + virBufferAddLit(buf, "<maxphysaddr "); + virBufferAsprintf(buf, "mode='%s'", + virCPUMaxPhysAddrModeTypeToString(def->addr->mode)); + if (def->addr->bits != -1) + virBufferAsprintf(buf, " bits='%d'", def->addr->bits); + virBufferAddLit(buf, "/>\n"); + } + for (i = 0; i < def->nfeatures; i++) { virCPUFeatureDef *feature = def->features + i; diff --git a/src/conf/cpu_conf.h b/src/conf/cpu_conf.h index 5d2980edbd..113d349708 100644 --- a/src/conf/cpu_conf.h +++ b/src/conf/cpu_conf.h @@ -116,6 +116,22 @@ struct _virCPUCacheDef { }; +typedef enum { + VIR_CPU_MAX_PHYS_ADDR_MODE_EMULATE, + VIR_CPU_MAX_PHYS_ADDR_MODE_PASSTHROUGH, + + VIR_CPU_MAX_PHYS_ADDR_MODE_LAST +} virCPUMaxPhysAddrMode; + +VIR_ENUM_DECL(virCPUMaxPhysAddrMode); + +typedef struct _virCPUMaxPhysAddrDef virCPUMaxPhysAddrDef; +struct _virCPUMaxPhysAddrDef { + int bits; /* -1 for unspecified */ + virCPUMaxPhysAddrMode mode; +}; + + typedef struct _virCPUDef virCPUDef; struct _virCPUDef { int refs; @@ -140,6 +156,7 @@ struct _virCPUDef { size_t nfeatures_max; virCPUFeatureDef *features; virCPUCacheDef *cache; + virCPUMaxPhysAddrDef *addr; virHostCPUTscInfo *tsc; virTristateSwitch migratable; /* for host-passthrough mode */ }; diff --git a/src/conf/schemas/cputypes.rng b/src/conf/schemas/cputypes.rng index 122880fb2e..4ae386c3c0 100644 --- a/src/conf/schemas/cputypes.rng +++ b/src/conf/schemas/cputypes.rng @@ -305,6 +305,22 @@ </element> </define> + <define name="cpuMaxPhysAddr"> + <element name="maxphysaddr"> + <attribute name="mode"> + <choice> + <value>emulate</value> + <value>passthrough</value> + </choice> + </attribute> + <optional> + <attribute name="bits"> + <ref name="unsignedInt"/> + </attribute> + </optional> + </element> + </define> + <define name="hostcpu"> <element name="cpu"> <element name="arch"> @@ -432,6 +448,9 @@ <optional> <ref name="cpuCache"/> </optional> + <optional> + <ref name="cpuMaxPhysAddr"/> + </optional> </interleave> </element> </define> diff --git a/src/libvirt_private.syms b/src/libvirt_private.syms index 6a5c5600df..774a594983 100644 --- a/src/libvirt_private.syms +++ b/src/libvirt_private.syms @@ -120,6 +120,8 @@ virCPUDefParseXMLString; virCPUDefRef; virCPUDefStealModel; virCPUDefUpdateFeature; +virCPUMaxPhysAddrModeTypeFromString; +virCPUMaxPhysAddrModeTypeToString; virCPUModeTypeToString; diff --git a/tests/genericxml2xmlindata/cpu-phys-bits-emulate.xml b/tests/genericxml2xmlindata/cpu-phys-bits-emulate.xml new file mode 100644 index 0000000000..e463e0b3e0 --- /dev/null +++ b/tests/genericxml2xmlindata/cpu-phys-bits-emulate.xml @@ -0,0 +1,20 @@ +<domain type='kvm'> + <name>foo</name> + <uuid>c7a5fdbd-edaf-9455-926a-d65c16db1809</uuid> + <memory unit='KiB'>219136</memory> + <currentMemory unit='KiB'>219136</currentMemory> + <vcpu placement='static'>1</vcpu> + <os> + <type arch='i686' machine='pc'>hvm</type> + <boot dev='hd'/> + </os> + <cpu mode='host-passthrough'> + <maxphysaddr mode='emulate' bits='42'/> + </cpu> + <clock offset='utc'/> + <on_poweroff>destroy</on_poweroff> + <on_reboot>restart</on_reboot> + <on_crash>destroy</on_crash> + <devices> + </devices> +</domain> diff --git a/tests/genericxml2xmlindata/cpu-phys-bits-passthrough.xml b/tests/genericxml2xmlindata/cpu-phys-bits-passthrough.xml new file mode 100644 index 0000000000..cce676eaa6 --- /dev/null +++ b/tests/genericxml2xmlindata/cpu-phys-bits-passthrough.xml @@ -0,0 +1,20 @@ +<domain type='kvm'> + <name>foo</name> + <uuid>c7a5fdbd-edaf-9455-926a-d65c16db1809</uuid> + <memory unit='KiB'>219136</memory> + <currentMemory unit='KiB'>219136</currentMemory> + <vcpu placement='static'>1</vcpu> + <os> + <type arch='i686' machine='pc'>hvm</type> + <boot dev='hd'/> + </os> + <cpu mode='host-passthrough'> + <maxphysaddr mode='passthrough'/> + </cpu> + <clock offset='utc'/> + <on_poweroff>destroy</on_poweroff> + <on_reboot>restart</on_reboot> + <on_crash>destroy</on_crash> + <devices> + </devices> +</domain> diff --git a/tests/genericxml2xmltest.c b/tests/genericxml2xmltest.c index b83367cb4b..bbe0d02226 100644 --- a/tests/genericxml2xmltest.c +++ b/tests/genericxml2xmltest.c @@ -246,6 +246,9 @@ mymain(void) DO_TEST_BACKUP_FULL("backup-pull-internal-invalid", true); + DO_TEST("cpu-phys-bits-emulate"); + DO_TEST("cpu-phys-bits-passthrough"); + virObjectUnref(caps); virObjectUnref(xmlopt); -- 2.36.1

Signed-off-by: Jim Fehlig <jfehlig(a)suse.com&gt; --- src/cpu/cpu_x86.c | 8 +++++++ src/util/virhostcpu.c | 55 +++++++++++++++++++++++++++++++++++++++++++ src/util/virhostcpu.h | 3 +++ 3 files changed, 66 insertions(+) diff --git a/src/cpu/cpu_x86.c b/src/cpu/cpu_x86.c index 4bb2ea4bae..9fcd6b8add 100644 --- a/src/cpu/cpu_x86.c +++ b/src/cpu/cpu_x86.c @@ -2738,6 +2738,7 @@ virCPUx86GetHost(virCPUDef *cpu, virDomainCapsCPUModels *models) { g_autoptr(virCPUData) cpuData = NULL; + unsigned int addrsz; int ret; if (virCPUx86DriverInitialize() < 0) @@ -2784,6 +2785,13 @@ virCPUx86GetHost(virCPUDef *cpu, VIR_DEBUG("Host CPU does not support invariant TSC"); } + if (virHostCPUGetPhysAddrSize(&addrsz) == 0) { + virCPUMaxPhysAddrDef *addr = g_new0(virCPUMaxPhysAddrDef, 1); + + addr->bits = addrsz; + cpu->addr = addr; + } + return ret; } #endif diff --git a/src/util/virhostcpu.c b/src/util/virhostcpu.c index 639dd9b51e..668e468f2a 100644 --- a/src/util/virhostcpu.c +++ b/src/util/virhostcpu.c @@ -570,6 +570,41 @@ virHostCPUParseFrequency(FILE *cpuinfo, } +static int +virHostCPUParsePhysAddrSize(FILE *cpuinfo, unsigned int *addrsz) +{ + char line[1024]; + + while (fgets(line, sizeof(line), cpuinfo) != NULL) { + char *str; + char *endptr; + + if (!STRPREFIX(line, "address sizes")) + continue; + + str = line; + str += strlen("address sizes"); + + /* Skip the colon. */ + if ((str = strstr(str, ":")) == NULL) + goto error; + str++; + + /* Parse the number of physical address bits */ + if (virStrToLong_ui(str, &endptr, 10, addrsz) < 0) + goto error; + + return 0; + } + + error: + virReportError(VIR_ERR_INTERNAL_ERROR, + _("Missing or invalid CPU address size in %s"), + CPUINFO_PATH); + return -1; +} + + int virHostCPUGetInfoPopulateLinux(FILE *cpuinfo, virArch arch, @@ -1616,6 +1651,20 @@ virHostCPUGetSignature(char **signature) return virHostCPUReadSignature(virArchFromHost(), cpuinfo, signature); } +int +virHostCPUGetPhysAddrSize(unsigned int *size) +{ + g_autoptr(FILE) cpuinfo = NULL; + + if (!(cpuinfo = fopen(CPUINFO_PATH, "r"))) { + virReportSystemError(errno, _("Failed to open cpuinfo file '%s'"), + CPUINFO_PATH); + return -1; + } + + return virHostCPUParsePhysAddrSize(cpuinfo, size); +} + #else int @@ -1625,6 +1674,12 @@ virHostCPUGetSignature(char **signature) return 0; } +int +virHostCPUGetPhysAddrSize(unsigned int *size) +{ + return 0; +} + #endif /* __linux__ */ int diff --git a/src/util/virhostcpu.h b/src/util/virhostcpu.h index b8ea7aafad..5232fee36d 100644 --- a/src/util/virhostcpu.h +++ b/src/util/virhostcpu.h @@ -58,6 +58,7 @@ int virHostCPUGetInfo(virArch hostarch, unsigned int *cores, unsigned int *threads); + int virHostCPUGetKVMMaxVCPUs(void) G_NO_INLINE; int virHostCPUStatsAssign(virNodeCPUStatsPtr param, @@ -86,6 +87,8 @@ virHostCPUTscInfo *virHostCPUGetTscInfo(void); int virHostCPUGetSignature(char **signature); +int virHostCPUGetPhysAddrSize(unsigned int *size); + int virHostCPUGetHaltPollTime(pid_t pid, unsigned long long *haltPollSuccess, unsigned long long *haltPollFail); -- 2.36.1

From: Dario Faggioli <dfaggioli(a)suse.com&gt; This patch maps /domain/cpu/maxphysaddr into -cpu parameters: - <maxphysaddr mode='passthrough'/> becomes host-phys-bits=on - <maxphysaddr mode='emualte' bits='42'/> becomes phys-bits=42 Passthrough mode can only be used if the chosen CPU model is 'host-passthrough'. Also validate that an explicitly specified bits value does not exceed the physical address bits on the host. The feature is available since QEMU 2.7.0. Signed-off-by: Dario Faggioli <dfaggioli(a)suse.com&gt; Signed-off-by: Jim Fehlig <jfehlig(a)suse.com&gt; --- src/qemu/qemu_command.c | 21 +++++++++ src/qemu/qemu_domain.c | 46 +++++++++++++++++++ src/qemu/qemu_validate.c | 12 +++++ .../cpu-phys-bits-emulate.args | 32 +++++++++++++ .../cpu-phys-bits-emulate.xml | 20 ++++++++ .../cpu-phys-bits-emulate2.args | 32 +++++++++++++ .../cpu-phys-bits-emulate2.xml | 20 ++++++++ .../cpu-phys-bits-emulate3.err | 1 + .../cpu-phys-bits-emulate3.xml | 20 ++++++++ .../cpu-phys-bits-passthrough.args | 32 +++++++++++++ .../cpu-phys-bits-passthrough.xml | 20 ++++++++ .../cpu-phys-bits-passthrough2.err | 1 + .../cpu-phys-bits-passthrough2.xml | 20 ++++++++ .../cpu-phys-bits-passthrough3.err | 1 + .../cpu-phys-bits-passthrough3.xml | 20 ++++++++ tests/qemuxml2argvtest.c | 7 +++ 16 files changed, 305 insertions(+) diff --git a/src/qemu/qemu_command.c b/src/qemu/qemu_command.c index 30c9bbbf2e..acf214be00 100644 --- a/src/qemu/qemu_command.c +++ b/src/qemu/qemu_command.c @@ -6847,6 +6847,27 @@ qemuBuildCpuCommandLine(virCommand *cmd, virBufferAddLit(&buf, ",l3-cache=off"); } + if (def->cpu && def->cpu->addr) { + virCPUMaxPhysAddrDef *addr = def->cpu->addr; + + switch (addr->mode) { + case VIR_CPU_MAX_PHYS_ADDR_MODE_PASSTHROUGH: + virBufferAddLit(&buf, ",host-phys-bits=on"); + break; + + case VIR_CPU_MAX_PHYS_ADDR_MODE_EMULATE: + if (addr->bits != -1) + virBufferAsprintf(&buf, ",phys-bits=%d", addr->bits); + else + virReportError(VIR_ERR_CONFIG_UNSUPPORTED, "%s", + _("Physical address bits unspecified")); + break; + + case VIR_CPU_MAX_PHYS_ADDR_MODE_LAST: + break; + } + } + cpu = virBufferContentAndReset(&cpu_buf); cpu_flags = virBufferContentAndReset(&buf); diff --git a/src/qemu/qemu_domain.c b/src/qemu/qemu_domain.c index b02ffc9a2e..0c97744b72 100644 --- a/src/qemu/qemu_domain.c +++ b/src/qemu/qemu_domain.c @@ -4429,6 +4429,52 @@ qemuDomainDefCPUPostParse(virDomainDef *def, } } + if (def->cpu->addr) { + virCPUMaxPhysAddrDef *addr = def->cpu->addr; + + if (!ARCH_IS_X86(def->os.arch)) { + virReportError(VIR_ERR_CONFIG_UNSUPPORTED, + _("CPU maximum physical address bits specification " + "is not supported for '%s' architecture"), + virArchToString(def->os.arch)); + return -1; + } + + switch (addr->mode) { + case VIR_CPU_MAX_PHYS_ADDR_MODE_PASSTHROUGH: + if (def->cpu->mode != VIR_CPU_MODE_HOST_PASSTHROUGH) { + virReportError(VIR_ERR_CONFIG_UNSUPPORTED, + _("CPU maximum physical address bits mode '%s' " + "can only be used with '%s' CPUs"), + virCPUMaxPhysAddrModeTypeToString(addr->mode), + virCPUModeTypeToString(VIR_CPU_MODE_HOST_PASSTHROUGH)); + return -1; + } + if (addr->bits != -1) { + virReportError(VIR_ERR_CONFIG_UNSUPPORTED, + _("CPU maximum physical address bits number " + "specification cannot be used with " + "mode='%s'"), + virCPUMaxPhysAddrModeTypeToString(VIR_CPU_MAX_PHYS_ADDR_MODE_PASSTHROUGH)); + return -1; + } + break; + + case VIR_CPU_MAX_PHYS_ADDR_MODE_EMULATE: + if (addr->bits == -1) { + virReportError(VIR_ERR_CONFIG_UNSUPPORTED, + _("if using CPU maximum physical address " + "mode='%s', bits= must be specified too"), + virCPUMaxPhysAddrModeTypeToString(VIR_CPU_MAX_PHYS_ADDR_MODE_EMULATE)); + return -1; + } + break; + + case VIR_CPU_MAX_PHYS_ADDR_MODE_LAST: + break; + } + } + for (i = 0; i < def->cpu->nfeatures; i++) { virCPUFeatureDef *feature = &def->cpu->features[i]; diff --git a/src/qemu/qemu_validate.c b/src/qemu/qemu_validate.c index 764d5b029e..b6c7d3b06a 100644 --- a/src/qemu/qemu_validate.c +++ b/src/qemu/qemu_validate.c @@ -380,6 +380,18 @@ qemuValidateDomainDefCpu(virQEMUDriver *driver, break; } + if (cpu->addr && + cpu->addr->mode == VIR_CPU_MAX_PHYS_ADDR_MODE_EMULATE && + driver->hostcpu && + driver->hostcpu->addr) { + if (cpu->addr->bits > driver->hostcpu->addr->bits) { + virReportError(VIR_ERR_CONFIG_UNSUPPORTED, "%s", + _("The number of virtual CPU address bits cannot " + "exceed the number supported by the host CPU")); + return -1; + } + } + return 0; } diff --git a/tests/qemuxml2argvdata/cpu-phys-bits-emulate.args b/tests/qemuxml2argvdata/cpu-phys-bits-emulate.args new file mode 100644 index 0000000000..f612f6889b --- /dev/null +++ b/tests/qemuxml2argvdata/cpu-phys-bits-emulate.args @@ -0,0 +1,32 @@ +LC_ALL=C \ +PATH=/bin \ +HOME=/tmp/lib/domain--1-foo \ +USER=test \ +LOGNAME=test \ +XDG_DATA_HOME=/tmp/lib/domain--1-foo/.local/share \ +XDG_CACHE_HOME=/tmp/lib/domain--1-foo/.cache \ +XDG_CONFIG_HOME=/tmp/lib/domain--1-foo/.config \ +QEMU_AUDIO_DRV=none \ +/usr/bin/qemu-system-x86_64 \ +-name guest=foo,debug-threads=on \ +-S \ +-object secret,id=masterKey0,format=raw,file=/tmp/lib/domain--1-foo/master-key.aes \ +-machine pc,usb=off,dump-guest-core=off \ +-accel kvm \ +-cpu host,phys-bits=42 \ +-m 214 \ +-overcommit mem-lock=off \ +-smp 1,sockets=1,cores=1,threads=1 \ +-uuid c7a5fdbd-edaf-9455-926a-d65c16db1809 \ +-display none \ +-no-user-config \ +-nodefaults \ +-chardev socket,id=charmonitor,fd=1729,server=on,wait=off \ +-mon chardev=charmonitor,id=monitor,mode=control \ +-rtc base=utc \ +-no-shutdown \ +-no-acpi \ +-boot strict=on \ +-usb \ +-device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x2 \ +-msg timestamp=on diff --git a/tests/qemuxml2argvdata/cpu-phys-bits-emulate.xml b/tests/qemuxml2argvdata/cpu-phys-bits-emulate.xml new file mode 100644 index 0000000000..f8bd63bc68 --- /dev/null +++ b/tests/qemuxml2argvdata/cpu-phys-bits-emulate.xml @@ -0,0 +1,20 @@ +<domain type='kvm'> + <name>foo</name> + <uuid>c7a5fdbd-edaf-9455-926a-d65c16db1809</uuid> + <memory unit='KiB'>219136</memory> + <currentMemory unit='KiB'>219136</currentMemory> + <vcpu placement='static'>1</vcpu> + <os> + <type arch='x86_64' machine='pc'>hvm</type> + <boot dev='hd'/> + </os> + <cpu mode='host-passthrough'> + <maxphysaddr mode='emulate' bits='42'/> + </cpu> + <clock offset='utc'/> + <on_poweroff>destroy</on_poweroff> + <on_reboot>restart</on_reboot> + <on_crash>destroy</on_crash> + <devices> + </devices> +</domain> diff --git a/tests/qemuxml2argvdata/cpu-phys-bits-emulate2.args b/tests/qemuxml2argvdata/cpu-phys-bits-emulate2.args new file mode 100644 index 0000000000..3489f44ded --- /dev/null +++ b/tests/qemuxml2argvdata/cpu-phys-bits-emulate2.args @@ -0,0 +1,32 @@ +LC_ALL=C \ +PATH=/bin \ +HOME=/tmp/lib/domain--1-foo \ +USER=test \ +LOGNAME=test \ +XDG_DATA_HOME=/tmp/lib/domain--1-foo/.local/share \ +XDG_CACHE_HOME=/tmp/lib/domain--1-foo/.cache \ +XDG_CONFIG_HOME=/tmp/lib/domain--1-foo/.config \ +QEMU_AUDIO_DRV=none \ +/usr/bin/qemu-system-x86_64 \ +-name guest=foo,debug-threads=on \ +-S \ +-object secret,id=masterKey0,format=raw,file=/tmp/lib/domain--1-foo/master-key.aes \ +-machine pc,usb=off,dump-guest-core=off \ +-accel kvm \ +-cpu core2duo,ds=on,acpi=on,ss=on,ht=on,tm=on,pbe=on,ds-cpl=on,vmx=on,est=on,tm2=on,cx16=on,xtpr=on,lahf-lm=on,phys-bits=42 \ +-m 214 \ +-overcommit mem-lock=off \ +-smp 1,sockets=1,cores=1,threads=1 \ +-uuid c7a5fdbd-edaf-9455-926a-d65c16db1809 \ +-display none \ +-no-user-config \ +-nodefaults \ +-chardev socket,id=charmonitor,fd=1729,server=on,wait=off \ +-mon chardev=charmonitor,id=monitor,mode=control \ +-rtc base=utc \ +-no-shutdown \ +-no-acpi \ +-boot strict=on \ +-usb \ +-device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x2 \ +-msg timestamp=on diff --git a/tests/qemuxml2argvdata/cpu-phys-bits-emulate2.xml b/tests/qemuxml2argvdata/cpu-phys-bits-emulate2.xml new file mode 100644 index 0000000000..188b3066ed --- /dev/null +++ b/tests/qemuxml2argvdata/cpu-phys-bits-emulate2.xml @@ -0,0 +1,20 @@ +<domain type='kvm'> + <name>foo</name> + <uuid>c7a5fdbd-edaf-9455-926a-d65c16db1809</uuid> + <memory unit='KiB'>219136</memory> + <currentMemory unit='KiB'>219136</currentMemory> + <vcpu placement='static'>1</vcpu> + <os> + <type arch='x86_64' machine='pc'>hvm</type> + <boot dev='hd'/> + </os> + <cpu mode='host-model'> + <maxphysaddr bits='42' mode='emulate'/> + </cpu> + <clock offset='utc'/> + <on_poweroff>destroy</on_poweroff> + <on_reboot>restart</on_reboot> + <on_crash>destroy</on_crash> + <devices> + </devices> +</domain> diff --git a/tests/qemuxml2argvdata/cpu-phys-bits-emulate3.err b/tests/qemuxml2argvdata/cpu-phys-bits-emulate3.err new file mode 100644 index 0000000000..5e21998259 --- /dev/null +++ b/tests/qemuxml2argvdata/cpu-phys-bits-emulate3.err @@ -0,0 +1 @@ +unsupported configuration: if using CPU maximum physical address mode='emulate', bits= must be specified too diff --git a/tests/qemuxml2argvdata/cpu-phys-bits-emulate3.xml b/tests/qemuxml2argvdata/cpu-phys-bits-emulate3.xml new file mode 100644 index 0000000000..30a14894dd --- /dev/null +++ b/tests/qemuxml2argvdata/cpu-phys-bits-emulate3.xml @@ -0,0 +1,20 @@ +<domain type='kvm'> + <name>foo</name> + <uuid>c7a5fdbd-edaf-9455-926a-d65c16db1809</uuid> + <memory unit='KiB'>219136</memory> + <currentMemory unit='KiB'>219136</currentMemory> + <vcpu placement='static'>1</vcpu> + <os> + <type arch='x86_64' machine='pc'>hvm</type> + <boot dev='hd'/> + </os> + <cpu mode='host-passthrough'> + <maxphysaddr mode='emulate'/> + </cpu> + <clock offset='utc'/> + <on_poweroff>destroy</on_poweroff> + <on_reboot>restart</on_reboot> + <on_crash>destroy</on_crash> + <devices> + </devices> +</domain> diff --git a/tests/qemuxml2argvdata/cpu-phys-bits-passthrough.args b/tests/qemuxml2argvdata/cpu-phys-bits-passthrough.args new file mode 100644 index 0000000000..df04195d1e --- /dev/null +++ b/tests/qemuxml2argvdata/cpu-phys-bits-passthrough.args @@ -0,0 +1,32 @@ +LC_ALL=C \ +PATH=/bin \ +HOME=/tmp/lib/domain--1-foo \ +USER=test \ +LOGNAME=test \ +XDG_DATA_HOME=/tmp/lib/domain--1-foo/.local/share \ +XDG_CACHE_HOME=/tmp/lib/domain--1-foo/.cache \ +XDG_CONFIG_HOME=/tmp/lib/domain--1-foo/.config \ +QEMU_AUDIO_DRV=none \ +/usr/bin/qemu-system-x86_64 \ +-name guest=foo,debug-threads=on \ +-S \ +-object secret,id=masterKey0,format=raw,file=/tmp/lib/domain--1-foo/master-key.aes \ +-machine pc,usb=off,dump-guest-core=off \ +-accel kvm \ +-cpu host,host-phys-bits=on \ +-m 214 \ +-overcommit mem-lock=off \ +-smp 1,sockets=1,cores=1,threads=1 \ +-uuid c7a5fdbd-edaf-9455-926a-d65c16db1809 \ +-display none \ +-no-user-config \ +-nodefaults \ +-chardev socket,id=charmonitor,fd=1729,server=on,wait=off \ +-mon chardev=charmonitor,id=monitor,mode=control \ +-rtc base=utc \ +-no-shutdown \ +-no-acpi \ +-boot strict=on \ +-usb \ +-device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x2 \ +-msg timestamp=on diff --git a/tests/qemuxml2argvdata/cpu-phys-bits-passthrough.xml b/tests/qemuxml2argvdata/cpu-phys-bits-passthrough.xml new file mode 100644 index 0000000000..db570beb8d --- /dev/null +++ b/tests/qemuxml2argvdata/cpu-phys-bits-passthrough.xml @@ -0,0 +1,20 @@ +<domain type='kvm'> + <name>foo</name> + <uuid>c7a5fdbd-edaf-9455-926a-d65c16db1809</uuid> + <memory unit='KiB'>219136</memory> + <currentMemory unit='KiB'>219136</currentMemory> + <vcpu placement='static'>1</vcpu> + <os> + <type arch='x86_64' machine='pc'>hvm</type> + <boot dev='hd'/> + </os> + <cpu mode='host-passthrough'> + <maxphysaddr mode='passthrough'/> + </cpu> + <clock offset='utc'/> + <on_poweroff>destroy</on_poweroff> + <on_reboot>restart</on_reboot> + <on_crash>destroy</on_crash> + <devices> + </devices> +</domain> diff --git a/tests/qemuxml2argvdata/cpu-phys-bits-passthrough2.err b/tests/qemuxml2argvdata/cpu-phys-bits-passthrough2.err new file mode 100644 index 0000000000..22009cc6e6 --- /dev/null +++ b/tests/qemuxml2argvdata/cpu-phys-bits-passthrough2.err @@ -0,0 +1 @@ +unsupported configuration: CPU maximum physical address bits mode 'passthrough' can only be used with 'host-passthrough' CPUs diff --git a/tests/qemuxml2argvdata/cpu-phys-bits-passthrough2.xml b/tests/qemuxml2argvdata/cpu-phys-bits-passthrough2.xml new file mode 100644 index 0000000000..511bbf9949 --- /dev/null +++ b/tests/qemuxml2argvdata/cpu-phys-bits-passthrough2.xml @@ -0,0 +1,20 @@ +<domain type='kvm'> + <name>foo</name> + <uuid>c7a5fdbd-edaf-9455-926a-d65c16db1809</uuid> + <memory unit='KiB'>219136</memory> + <currentMemory unit='KiB'>219136</currentMemory> + <vcpu placement='static'>1</vcpu> + <os> + <type arch='x86_64' machine='pc'>hvm</type> + <boot dev='hd'/> + </os> + <cpu mode='host-model'> + <maxphysaddr mode='passthrough'/> + </cpu> + <clock offset='utc'/> + <on_poweroff>destroy</on_poweroff> + <on_reboot>restart</on_reboot> + <on_crash>destroy</on_crash> + <devices> + </devices> +</domain> diff --git a/tests/qemuxml2argvdata/cpu-phys-bits-passthrough3.err b/tests/qemuxml2argvdata/cpu-phys-bits-passthrough3.err new file mode 100644 index 0000000000..28f2e43432 --- /dev/null +++ b/tests/qemuxml2argvdata/cpu-phys-bits-passthrough3.err @@ -0,0 +1 @@ +unsupported configuration: CPU maximum physical address bits number specification cannot be used with mode='passthrough' diff --git a/tests/qemuxml2argvdata/cpu-phys-bits-passthrough3.xml b/tests/qemuxml2argvdata/cpu-phys-bits-passthrough3.xml new file mode 100644 index 0000000000..a94e567dcb --- /dev/null +++ b/tests/qemuxml2argvdata/cpu-phys-bits-passthrough3.xml @@ -0,0 +1,20 @@ +<domain type='kvm'> + <name>foo</name> + <uuid>c7a5fdbd-edaf-9455-926a-d65c16db1809</uuid> + <memory unit='KiB'>219136</memory> + <currentMemory unit='KiB'>219136</currentMemory> + <vcpu placement='static'>1</vcpu> + <os> + <type arch='x86_64' machine='pc'>hvm</type> + <boot dev='hd'/> + </os> + <cpu mode='host-passthrough'> + <maxphysaddr mode='passthrough' bits='42'/> + </cpu> + <clock offset='utc'/> + <on_poweroff>destroy</on_poweroff> + <on_reboot>restart</on_reboot> + <on_crash>destroy</on_crash> + <devices> + </devices> +</domain> diff --git a/tests/qemuxml2argvtest.c b/tests/qemuxml2argvtest.c index b72d61c3bc..4fd5120b70 100644 --- a/tests/qemuxml2argvtest.c +++ b/tests/qemuxml2argvtest.c @@ -3470,6 +3470,13 @@ mymain(void) /* HVF guests should not work on Linux with KVM */ DO_TEST_CAPS_LATEST_PARSE_ERROR("hvf-x86_64-q35-headless"); + DO_TEST("cpu-phys-bits-passthrough", QEMU_CAPS_KVM); + DO_TEST("cpu-phys-bits-emulate", QEMU_CAPS_KVM); + DO_TEST("cpu-phys-bits-emulate2", QEMU_CAPS_KVM); + DO_TEST_PARSE_ERROR("cpu-phys-bits-emulate3", QEMU_CAPS_KVM); + DO_TEST_PARSE_ERROR("cpu-phys-bits-passthrough2", QEMU_CAPS_KVM); + DO_TEST_PARSE_ERROR("cpu-phys-bits-passthrough3", QEMU_CAPS_KVM); + if (getenv("LIBVIRT_SKIP_CLEANUP") == NULL) virFileDeleteTree(fakerootdir); -- 2.36.1

Signed-off-by: Jim Fehlig <jfehlig(a)suse.com&gt; --- src/conf/cpu_conf.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/src/conf/cpu_conf.c b/src/conf/cpu_conf.c index e31c4ab467..8e75cdbb4f 100644 --- a/src/conf/cpu_conf.c +++ b/src/conf/cpu_conf.c @@ -1127,6 +1127,15 @@ virCPUDefIsEqual(virCPUDef *src, return false; } + if ((src->addr && !dst->addr) || + (!src->addr && dst->addr) || + (src->addr && dst->addr && + (src->addr->mode != dst->addr->mode || + src->addr->bits != dst->addr->bits))) { + MISMATCH("%s", _("Target CPU maxphysaddr does not match source")); + return false; + } + if (src->nfeatures != dst->nfeatures) { MISMATCH(_("Target CPU feature count %zu does not match source %zu"), dst->nfeatures, src->nfeatures); -- 2.36.1