11:05 a.m.
https://bugzilla.redhat.com/show_bug.cgi?id=1477880
If the "/#" is missing from the provided iSCSI path, then we need
to provide the default LUN of /0; otherwise, QEMU will fail to parse
the URL causing a failure to either create the guest or hotplug
attach the storage.
Alter the command lines generated appropriately. This change does not
effect the XML input files.
One 'side effect' of this for the argv2xml is that if a "/0" is found
on the command line, then the generated XML would need to add the "/0"
to the output XML since it wouldn't be known whether it existed or not
at qemu process creation time.
Signed-off-by: John Ferlan <jferlan(a)redhat.com>
---
NB: Investigated the history quite a bit between QEMU and libiscsi and
it seems as though this probably never worked and of course never "tested"
in a real environment. Ironically, in qapi/block-core.json, it is claimed
that the LUN would default to 0, but the block/iscsi.c code that calls
iscsi_parse_full_url would never (AFAICT) have supported not supplying
some LUN on the command line.
src/qemu/qemu_command.c | 20 ++++++++++++++++----
.../qemuargv2xml-disk-drive-network-iscsi.args | 2 +-
.../qemuargv2xml-disk-drive-network-iscsi.xml | 2 +-
.../qemuxml2argv-disk-drive-network-iscsi-lun.args | 2 +-
.../qemuxml2argv-disk-drive-network-iscsi.args | 2 +-
.../qemuxml2argv-hostdev-scsi-lsi-iscsi.args | 2 +-
.../qemuxml2argv-hostdev-scsi-virtio-iscsi.args | 2 +-
7 files changed, 22 insertions(+), 10 deletions(-)
diff --git a/src/qemu/qemu_command.c b/src/qemu/qemu_command.c
index ed8cb6e..cff84de 100644
--- a/src/qemu/qemu_command.c
+++ b/src/qemu/qemu_command.c
@@ -830,10 +830,22 @@ qemuBuildNetworkDriveURI(virStorageSourcePtr src,
src->volume, src->path) < 0)
goto cleanup;
} else {
- if (virAsprintf(&uri->path, "%s%s",
- src->path[0] == '/' ? "" :
"/",
- src->path) < 0)
- goto cleanup;
+ if (src->protocol == VIR_STORAGE_NET_PROTOCOL_ISCSI &&
+ !strchr(src->path, '/')) {
+
+ /* The details of iqn is defined by RFC 3720 and 3721, but
+ * we just need to make sure there's a lun provided. If not
+ * provided, then default to zero. If ISCSI LUN is provided
+ * by /dev/disk/by-path/... , then that path will have the
+ * specific lun requested. */
+ if (virAsprintf(&uri->path, "/%s/0", src->path) <
0)
+ goto cleanup;
+ } else {
+ if (virAsprintf(&uri->path, "%s%s",
+ src->path[0] == '/' ? "" :
"/",
+ src->path) < 0)
+ goto cleanup;
+ }
}
}
diff --git a/tests/qemuargv2xmldata/qemuargv2xml-disk-drive-network-iscsi.args
b/tests/qemuargv2xmldata/qemuargv2xml-disk-drive-network-iscsi.args
index 62cc5c0..ec2e8dc 100644
--- a/tests/qemuargv2xmldata/qemuargv2xml-disk-drive-network-iscsi.args
+++ b/tests/qemuargv2xmldata/qemuargv2xml-disk-drive-network-iscsi.args
@@ -16,7 +16,7 @@ QEMU_AUDIO_DRV=none \
-no-acpi \
-boot c \
-usb \
--drive file=iscsi://example.org:6000/iqn.1992-01.com.example,format=raw,\
+-drive file=iscsi://example.org:6000/iqn.1992-01.com.example/0,format=raw,\
if=virtio \
-drive file=iscsi://example.org:6000/iqn.1992-01.com.example/1,format=raw,\
if=virtio \
diff --git a/tests/qemuargv2xmldata/qemuargv2xml-disk-drive-network-iscsi.xml
b/tests/qemuargv2xmldata/qemuargv2xml-disk-drive-network-iscsi.xml
index 23542fa..694412b 100644
--- a/tests/qemuargv2xmldata/qemuargv2xml-disk-drive-network-iscsi.xml
+++ b/tests/qemuargv2xmldata/qemuargv2xml-disk-drive-network-iscsi.xml
@@ -16,7 +16,7 @@
<emulator>/usr/bin/qemu-system-i686</emulator>
<disk type='network' device='disk'>
<driver name='qemu' type='raw'/>
- <source protocol='iscsi' name='iqn.1992-01.com.example'>
+ <source protocol='iscsi' name='iqn.1992-01.com.example/0'>
<host name='example.org' port='6000'/>
</source>
<target dev='vda' bus='virtio'/>
diff --git a/tests/qemuxml2argvdata/qemuxml2argv-disk-drive-network-iscsi-lun.args
b/tests/qemuxml2argvdata/qemuxml2argv-disk-drive-network-iscsi-lun.args
index b25f3a0..0fbfd9a 100644
--- a/tests/qemuxml2argvdata/qemuxml2argv-disk-drive-network-iscsi-lun.args
+++ b/tests/qemuxml2argvdata/qemuxml2argv-disk-drive-network-iscsi-lun.args
@@ -21,7 +21,7 @@ server,nowait \
-boot c \
-device virtio-scsi-pci,id=scsi0,bus=pci.0,addr=0x3 \
-usb \
--drive file=iscsi://example.org:3260/iqn.1992-01.com.example,format=raw,\
+-drive file=iscsi://example.org:3260/iqn.1992-01.com.example/0,format=raw,\
if=none,id=drive-scsi0-0-0-0 \
-device scsi-block,bus=scsi0.0,channel=0,scsi-id=0,lun=0,\
drive=drive-scsi0-0-0-0,id=scsi0-0-0-0
diff --git a/tests/qemuxml2argvdata/qemuxml2argv-disk-drive-network-iscsi.args
b/tests/qemuxml2argvdata/qemuxml2argv-disk-drive-network-iscsi.args
index a1d93af..ed15fda 100644
--- a/tests/qemuxml2argvdata/qemuxml2argv-disk-drive-network-iscsi.args
+++ b/tests/qemuxml2argvdata/qemuxml2argv-disk-drive-network-iscsi.args
@@ -19,7 +19,7 @@ server,nowait \
-no-acpi \
-boot c \
-usb \
--drive file=iscsi://example.org:6000/iqn.1992-01.com.example,format=raw,\
+-drive file=iscsi://example.org:6000/iqn.1992-01.com.example/0,format=raw,\
if=none,id=drive-virtio-disk0 \
-device virtio-blk-pci,bus=pci.0,addr=0x3,drive=drive-virtio-disk0,\
id=virtio-disk0 \
diff --git a/tests/qemuxml2argvdata/qemuxml2argv-hostdev-scsi-lsi-iscsi.args
b/tests/qemuxml2argvdata/qemuxml2argv-hostdev-scsi-lsi-iscsi.args
index 43c555a..07ae9f5 100644
--- a/tests/qemuxml2argvdata/qemuxml2argv-hostdev-scsi-lsi-iscsi.args
+++ b/tests/qemuxml2argvdata/qemuxml2argv-hostdev-scsi-lsi-iscsi.args
@@ -22,7 +22,7 @@ server,nowait \
-usb \
-drive file=/dev/HostVG/QEMUGuest2,format=raw,if=none,id=drive-ide0-0-0 \
-device ide-drive,bus=ide.0,unit=0,drive=drive-ide0-0-0,id=ide0-0-0 \
--drive file=iscsi://example.org:3260/iqn.1992-01.com.example,if=none,\
+-drive file=iscsi://example.org:3260/iqn.1992-01.com.example/0,if=none,\
format=raw,id=drive-hostdev0 \
-device scsi-generic,bus=scsi0.0,scsi-id=4,drive=drive-hostdev0,id=hostdev0 \
-drive file=iscsi://example.org:3260/iqn.1992-01.com.example/1,if=none,\
diff --git a/tests/qemuxml2argvdata/qemuxml2argv-hostdev-scsi-virtio-iscsi.args
b/tests/qemuxml2argvdata/qemuxml2argv-hostdev-scsi-virtio-iscsi.args
index a78e309..d80c859 100644
--- a/tests/qemuxml2argvdata/qemuxml2argv-hostdev-scsi-virtio-iscsi.args
+++ b/tests/qemuxml2argvdata/qemuxml2argv-hostdev-scsi-virtio-iscsi.args
@@ -22,7 +22,7 @@ server,nowait \
-usb \
-drive file=/dev/HostVG/QEMUGuest2,format=raw,if=none,id=drive-ide0-0-0 \
-device ide-drive,bus=ide.0,unit=0,drive=drive-ide0-0-0,id=ide0-0-0 \
--drive file=iscsi://example.org:3260/iqn.1992-01.com.example,if=none,\
+-drive file=iscsi://example.org:3260/iqn.1992-01.com.example/0,if=none,\
format=raw,id=drive-hostdev0 \
-device scsi-generic,bus=scsi0.0,channel=0,scsi-id=2,lun=4,\
drive=drive-hostdev0,id=hostdev0 \
--
2.9.5
6:26 a.m.
On Wed, Sep 06, 2017 at 12:05:32 -0400, John Ferlan wrote:
https://bugzilla.redhat.com/show_bug.cgi?id=1477880
If the "/#" is missing from the provided iSCSI path, then we need
to provide the default LUN of /0; otherwise, QEMU will fail to parse
the URL causing a failure to either create the guest or hotplug
attach the storage.
Alter the command lines generated appropriately. This change does not
effect the XML input files.
One 'side effect' of this for the argv2xml is that if a "/0" is found
on the command line, then the generated XML would need to add the "/0"
to the output XML since it wouldn't be known whether it existed or not
at qemu process creation time.
Signed-off-by: John Ferlan <jferlan(a)redhat.com>
---
NB: Investigated the history quite a bit between QEMU and libiscsi and
it seems as though this probably never worked and of course never "tested"
in a real environment. Ironically, in qapi/block-core.json, it is claimed
that the LUN would default to 0, but the block/iscsi.c code that calls
iscsi_parse_full_url would never (AFAICT) have supported not supplying
some LUN on the command line.
src/qemu/qemu_command.c | 20 ++++++++++++++++----
.../qemuargv2xml-disk-drive-network-iscsi.args | 2 +-
.../qemuargv2xml-disk-drive-network-iscsi.xml | 2 +-
.../qemuxml2argv-disk-drive-network-iscsi-lun.args | 2 +-
.../qemuxml2argv-disk-drive-network-iscsi.args | 2 +-
.../qemuxml2argv-hostdev-scsi-lsi-iscsi.args | 2 +-
.../qemuxml2argv-hostdev-scsi-virtio-iscsi.args | 2 +-
7 files changed, 22 insertions(+), 10 deletions(-)
diff --git a/src/qemu/qemu_command.c b/src/qemu/qemu_command.c
index ed8cb6e..cff84de 100644
--- a/src/qemu/qemu_command.c
+++ b/src/qemu/qemu_command.c
@@ -830,10 +830,22 @@ qemuBuildNetworkDriveURI(virStorageSourcePtr src,
src->volume, src->path) < 0)
goto cleanup;
} else {
- if (virAsprintf(&uri->path, "%s%s",
- src->path[0] == '/' ? "" :
"/",
- src->path) < 0)
- goto cleanup;
+ if (src->protocol == VIR_STORAGE_NET_PROTOCOL_ISCSI &&
+ !strchr(src->path, '/')) {
+
+ /* The details of iqn is defined by RFC 3720 and 3721, but
+ * we just need to make sure there's a lun provided. If not
+ * provided, then default to zero. If ISCSI LUN is provided
+ * by /dev/disk/by-path/... , then that path will have the
+ * specific lun requested. */
+ if (virAsprintf(&uri->path, "/%s/0", src->path) <
0)
+ goto cleanup;
+ } else {
+ if (virAsprintf(&uri->path, "%s%s",
+ src->path[0] == '/' ? "" :
"/",
+ src->path) < 0)
+ goto cleanup;
+ }
}
}
The command line generator is not really the correct place to add
defaults. We have the post parse callbacks for this, and the LUN clearly
should be marked in the XML
7:06 a.m.
On 09/11/2017 07:26 AM, Peter Krempa wrote:
On Wed, Sep 06, 2017 at 12:05:32 -0400, John Ferlan wrote:
> https://bugzilla.redhat.com/show_bug.cgi?id=1477880
>
> If the "/#" is missing from the provided iSCSI path, then we need
> to provide the default LUN of /0; otherwise, QEMU will fail to parse
> the URL causing a failure to either create the guest or hotplug
> attach the storage.
>
> Alter the command lines generated appropriately. This change does not
> effect the XML input files.
>
> One 'side effect' of this for the argv2xml is that if a "/0" is
found
> on the command line, then the generated XML would need to add the "/0"
> to the output XML since it wouldn't be known whether it existed or not
> at qemu process creation time.
>
> Signed-off-by: John Ferlan <jferlan(a)redhat.com>
> ---
> NB: Investigated the history quite a bit between QEMU and libiscsi and
> it seems as though this probably never worked and of course never
"tested"
> in a real environment. Ironically, in qapi/block-core.json, it is claimed
> that the LUN would default to 0, but the block/iscsi.c code that calls
> iscsi_parse_full_url would never (AFAICT) have supported not supplying
> some LUN on the command line.
>
> src/qemu/qemu_command.c | 20 ++++++++++++++++----
> .../qemuargv2xml-disk-drive-network-iscsi.args | 2 +-
> .../qemuargv2xml-disk-drive-network-iscsi.xml | 2 +-
> .../qemuxml2argv-disk-drive-network-iscsi-lun.args | 2 +-
> .../qemuxml2argv-disk-drive-network-iscsi.args | 2 +-
> .../qemuxml2argv-hostdev-scsi-lsi-iscsi.args | 2 +-
> .../qemuxml2argv-hostdev-scsi-virtio-iscsi.args | 2 +-
> 7 files changed, 22 insertions(+), 10 deletions(-)
>
> diff --git a/src/qemu/qemu_command.c b/src/qemu/qemu_command.c
> index ed8cb6e..cff84de 100644
> --- a/src/qemu/qemu_command.c
> +++ b/src/qemu/qemu_command.c
> @@ -830,10 +830,22 @@ qemuBuildNetworkDriveURI(virStorageSourcePtr src,
> src->volume, src->path) < 0)
> goto cleanup;
> } else {
> - if (virAsprintf(&uri->path, "%s%s",
> - src->path[0] == '/' ? "" :
"/",
> - src->path) < 0)
> - goto cleanup;
> + if (src->protocol == VIR_STORAGE_NET_PROTOCOL_ISCSI &&
> + !strchr(src->path, '/')) {
> +
> + /* The details of iqn is defined by RFC 3720 and 3721, but
> + * we just need to make sure there's a lun provided. If not
> + * provided, then default to zero. If ISCSI LUN is provided
> + * by /dev/disk/by-path/... , then that path will have the
> + * specific lun requested. */
> + if (virAsprintf(&uri->path, "/%s/0", src->path)
< 0)
> + goto cleanup;
> + } else {
> + if (virAsprintf(&uri->path, "%s%s",
> + src->path[0] == '/' ? "" :
"/",
> + src->path) < 0)
> + goto cleanup;
> + }
> }
> }
The command line generator is not really the correct place to add
defaults. We have the post parse callbacks for this, and the LUN clearly
should be marked in the XML
Sure, but doing so would then change the provided XML, right? Is that
the desired outcome - to change and save the provided XML? IDC, it just
that this point doesn't alter that XML - rather just the command line
which seemed a bit safer to me.
John
Ironically as one digs into QEMU one finds that it claims that the LUN
doesn't have to be provided (defaults to 0 in @BlockdevOptionsIscsi
seems to imply that to me), but doing so doesn't work. Nor could I find
a commit from qemu histories where it ever did work. Even the JSON
parsing code in virStorageSourceParseBackingJSONiSCSI seems to be
written such that if "lun" isn't there, the XML is built to append a 0
since we don't check status of the read.
8:11 a.m.
On Mon, Sep 11, 2017 at 08:06:04AM -0400, John Ferlan wrote:
On 09/11/2017 07:26 AM, Peter Krempa wrote:
> On Wed, Sep 06, 2017 at 12:05:32 -0400, John Ferlan wrote:
>> https://bugzilla.redhat.com/show_bug.cgi?id=1477880
>>
>> If the "/#" is missing from the provided iSCSI path, then we need
>> to provide the default LUN of /0; otherwise, QEMU will fail to parse
>> the URL causing a failure to either create the guest or hotplug
>> attach the storage.
>>
>> Alter the command lines generated appropriately. This change does not
>> effect the XML input files.
>>
>> One 'side effect' of this for the argv2xml is that if a "/0"
is found
>> on the command line, then the generated XML would need to add the
"/0"
>> to the output XML since it wouldn't be known whether it existed or not
>> at qemu process creation time.
>>
>> Signed-off-by: John Ferlan <jferlan(a)redhat.com>
>> ---
>> NB: Investigated the history quite a bit between QEMU and libiscsi and
>> it seems as though this probably never worked and of course never
"tested"
>> in a real environment. Ironically, in qapi/block-core.json, it is claimed
>> that the LUN would default to 0, but the block/iscsi.c code that calls
>> iscsi_parse_full_url would never (AFAICT) have supported not supplying
>> some LUN on the command line.
>>
>> src/qemu/qemu_command.c | 20 ++++++++++++++++----
>> .../qemuargv2xml-disk-drive-network-iscsi.args | 2 +-
>> .../qemuargv2xml-disk-drive-network-iscsi.xml | 2 +-
>> .../qemuxml2argv-disk-drive-network-iscsi-lun.args | 2 +-
>> .../qemuxml2argv-disk-drive-network-iscsi.args | 2 +-
>> .../qemuxml2argv-hostdev-scsi-lsi-iscsi.args | 2 +-
>> .../qemuxml2argv-hostdev-scsi-virtio-iscsi.args | 2 +-
>> 7 files changed, 22 insertions(+), 10 deletions(-)
>>
>> diff --git a/src/qemu/qemu_command.c b/src/qemu/qemu_command.c
>> index ed8cb6e..cff84de 100644
>> --- a/src/qemu/qemu_command.c
>> +++ b/src/qemu/qemu_command.c
>> @@ -830,10 +830,22 @@ qemuBuildNetworkDriveURI(virStorageSourcePtr src,
>> src->volume, src->path) < 0)
>> goto cleanup;
>> } else {
>> - if (virAsprintf(&uri->path, "%s%s",
>> - src->path[0] == '/' ? "" :
"/",
>> - src->path) < 0)
>> - goto cleanup;
>> + if (src->protocol == VIR_STORAGE_NET_PROTOCOL_ISCSI &&
>> + !strchr(src->path, '/')) {
>> +
>> + /* The details of iqn is defined by RFC 3720 and 3721, but
>> + * we just need to make sure there's a lun provided. If
not
>> + * provided, then default to zero. If ISCSI LUN is provided
>> + * by /dev/disk/by-path/... , then that path will have the
>> + * specific lun requested. */
>> + if (virAsprintf(&uri->path, "/%s/0",
src->path) < 0)
>> + goto cleanup;
>> + } else {
>> + if (virAsprintf(&uri->path, "%s%s",
>> + src->path[0] == '/' ? "" :
"/",
>> + src->path) < 0)
>> + goto cleanup;
>> + }
>> }
>> }
>
> The command line generator is not really the correct place to add
> defaults. We have the post parse callbacks for this, and the LUN clearly
> should be marked in the XML
>
Sure, but doing so would then change the provided XML, right? Is that
the desired outcome - to change and save the provided XML? IDC, it just
that this point doesn't alter that XML - rather just the command line
which seemed a bit safer to me.
Everything that we pass to QEMU command line should be also in XML, the
main reason is migration. If some default value is not in the XML and
we change the default value in our code migration to a libvirt where
the default value is different may fail or may change ABI.
Pavel
2659
days inactive
2664
days old
3 comments
3 participants
participants (3)
-
John Ferlan -
Pavel Hrdina -
Peter Krempa