On 03/05/2012 08:12 PM, Roopa Prabhu wrote:
From: Roopa Prabhu <roprabhu(a)cisco.com>
These changes are applied only if the hostdev has a parent net device.
If the parent netdevice has virtual port information, the original virtualport
associate functions are called (these set and restore both mac and port profile
on an interface). Else, only mac address is set on the device
using other methods depending on if its a sriov device or not.
Changes also include hotplug pci devices
Signed-off-by: Roopa Prabhu <roprabhu(a)cisco.com>
---
src/qemu/qemu_hostdev.c | 241 +++++++++++++++++++++++++++++++++++++++++++++--
src/qemu/qemu_hostdev.h | 8 +-
src/qemu/qemu_hotplug.c | 10 ++
3 files changed, 246 insertions(+), 13 deletions(-)
diff --git a/src/qemu/qemu_hostdev.c b/src/qemu/qemu_hostdev.c
index b3cad8e..ebcdc52 100644
--- a/src/qemu/qemu_hostdev.c
+++ b/src/qemu/qemu_hostdev.c
@@ -29,6 +29,13 @@
#include "memory.h"
#include "pci.h"
#include "hostusb.h"
+#include "virnetdev.h"
+
+VIR_ENUM_IMPL(virNetDevVPort, VIR_NETDEV_VPORT_PROFILE_LAST,
+ "none",
+ "802.1Qbg",
+ "802.1Qbh",
+ "openvswitch")
static pciDeviceList *
qemuGetPciHostDeviceList(virDomainHostdevDefPtr *hostdevs, int nhostdevs)
@@ -156,19 +163,192 @@ int qemuUpdateActivePciHostdevs(struct qemud_driver *driver,
return 0;
}
+static int
+qemuDomainHostdevPciSysfsPath(virDomainHostdevDefPtr hostdev, char **sysfs_path)
+{
+ struct pci_config_address config_address;
+
+ config_address.domain = hostdev->source.subsys.u.pci.domain;
+ config_address.bus = hostdev->source.subsys.u.pci.bus;
+ config_address.slot = hostdev->source.subsys.u.pci.slot;
+ config_address.function = hostdev->source.subsys.u.pci.function;
+
+ return pciConfigAddressToSysfsFile(&config_address, sysfs_path);
+}
+
+int
+qemuDomainHostdevIsVirtualFunction(virDomainHostdevDefPtr hostdev)
+{
+ char *sysfs_path = NULL;
+ int ret = -1;
+
+ if (qemuDomainHostdevPciSysfsPath(hostdev, &sysfs_path) < 0)
+ return ret;
+
+ ret = pciDeviceIsVirtualFunction(sysfs_path);
+
+ VIR_FREE(sysfs_path);
+
+ return ret;
+}
+
+static int
+qemuDomainHostdevNetDevice(virDomainHostdevDefPtr hostdev, char **linkdev,
+ int *vf)
+{
+ int ret = -1;
+ char *sysfs_path = NULL;
+
+ if (qemuDomainHostdevPciSysfsPath(hostdev, &sysfs_path) < 0)
+ return ret;
+
+ if (pciDeviceIsVirtualFunction(sysfs_path) == 1) {
+ if (pciDeviceGetVirtualFunctionInfo(sysfs_path, linkdev,
+ vf) < 0)
+ goto cleanup;
+ } else {
+ if (pciDeviceNetName(sysfs_path, linkdev) < 0)
+ goto cleanup;
+ *vf = -1;
+ }
+
+ ret = 0;
+
+cleanup:
+ VIR_FREE(sysfs_path);
+
+ return ret;
+}
+
+static int
+qemuDomainHostdevNetConfigVirtPortProfile(const char *linkdev, int vf,
+ virNetDevVPortProfilePtr virtPort,
+ const unsigned char *macaddr,
+ const unsigned char *uuid,
+ int associate)
+{
+ int ret = -1;
+
+ if (!virtPort)
+ return ret;
+
+ switch(virtPort->virtPortType) {
+ case VIR_NETDEV_VPORT_PROFILE_NONE:
+ case VIR_NETDEV_VPORT_PROFILE_OPENVSWITCH:
+ case VIR_NETDEV_VPORT_PROFILE_8021QBG:
+ case VIR_NETDEV_VPORT_PROFILE_LAST:
+ qemuReportError(VIR_ERR_CONFIG_UNSUPPORTED, _("virtualport type %s is
"
+ "currently not supported on interfaces of type "
+ "hostdev"),
+ virNetDevVPortTypeToString(virtPort->virtPortType));
+ break;
+
+ case VIR_NETDEV_VPORT_PROFILE_8021QBH:
+ if (associate)
+ ret = virNetDevVPortProfileAssociate(NULL, virtPort, macaddr,
+ linkdev, vf, uuid,
+ VIR_NETDEV_VPORT_PROFILE_OP_CREATE,
false);
+ else
+ ret = virNetDevVPortProfileDisassociate(NULL, virtPort,
+ macaddr, linkdev, vf,
+
VIR_NETDEV_VPORT_PROFILE_OP_DESTROY);
+ break;
+ }
+
+ return ret;
+}
+
+int
+qemuDomainHostdevNetConfigReplace(virDomainHostdevDefPtr hostdev,
+ const unsigned char *uuid,
+ char *stateDir)
+{
+ char *linkdev = NULL;
+ virNetDevVPortProfilePtr virtPort;
+ int ret = -1;
+ int vf = -1;
+ int vlanid = -1;
+ int port_profile_associate = 1;
+ int isvf;
+
+ isvf = qemuDomainHostdevIsVirtualFunction(hostdev);
+ if (isvf <= 0) {
+ qemuReportError(VIR_ERR_CONFIG_UNSUPPORTED,
+ _("Interface type hostdev is currently supported on"
+ " sriov Virtual functions only"));
I changed the capitalization a bit here: "SR-IOV Virtual Functions".
+ return ret;
+ }
+
+ if (qemuDomainHostdevNetDevice(hostdev, &linkdev, &vf) < 0)
+ return ret;
+
+ virtPort = virDomainNetGetActualVirtPortProfile(
+
hostdev->parent.data.net);
+ if (virtPort)
+ ret = qemuDomainHostdevNetConfigVirtPortProfile(linkdev, vf,
+ virtPort, hostdev->parent.data.net->mac, uuid,
+ port_profile_associate);
+ else
+ /* Set only mac */
+ ret = virNetDevReplaceNetConfig(linkdev, vf,
+ hostdev->parent.data.net->mac, vlanid,
+ stateDir);
+ VIR_FREE(linkdev);
+
+ return ret;
+}
+
+int
+qemuDomainHostdevNetConfigRestore(virDomainHostdevDefPtr hostdev,
+ char *stateDir)
+{
+ char *linkdev = NULL;
+ virNetDevVPortProfilePtr virtPort;
+ int ret = -1;
+ int vf = -1;
+ int port_profile_associate = 0;
+ int isvf;
+
+ isvf = qemuDomainHostdevIsVirtualFunction(hostdev);
+ if (isvf <= 0) {
+ qemuReportError(VIR_ERR_CONFIG_UNSUPPORTED,
+ _("Interface type hostdev is currently supported on"
+ " sriov Virtual functions only"));
ditto.
+ return ret;
+ }
+
+ if (qemuDomainHostdevNetDevice(hostdev, &linkdev, &vf) < 0)
+ return ret;
+
+ virtPort = virDomainNetGetActualVirtPortProfile(
+
hostdev->parent.data.net);
+ if (virtPort)
+ ret = qemuDomainHostdevNetConfigVirtPortProfile(linkdev, vf, virtPort,
+ hostdev->parent.data.net->mac, NULL,
+ port_profile_associate);
+ else
+ ret = virNetDevRestoreNetConfig(linkdev, vf, stateDir);
+
+ VIR_FREE(linkdev);
+
+ return ret;
+}
+
int qemuPrepareHostdevPCIDevices(struct qemud_driver *driver,
const char *name,
+ const unsigned char *uuid,
virDomainHostdevDefPtr *hostdevs,
int nhostdevs)
{
pciDeviceList *pcidevs;
+ int last_processed_hostdev_vf = -1;
int i;
int ret = -1;
if (!(pcidevs = qemuGetPciHostDeviceList(hostdevs, nhostdevs)))
return -1;
- /* We have to use 7 loops here. *All* devices must
+ /* We have to use 9 loops here. *All* devices must
* be detached before we reset any of them, because
* in some cases you have to reset the whole PCI,
* which impacts all devices on it. Also, all devices
@@ -225,7 +405,22 @@ int qemuPrepareHostdevPCIDevices(struct qemud_driver *driver,
goto reattachdevs;
}
- /* Loop 4: Now mark all the devices as active */
+ /* Loop 4: For SRIOV network devices, Now that we have detached the
+ * the network device, set the netdev config */
+ for (i = 0; i < nhostdevs; i++) {
+ virDomainHostdevDefPtr hostdev = hostdevs[i];
+ if (hostdev->mode != VIR_DOMAIN_HOSTDEV_MODE_SUBSYS)
+ continue;
+ if (hostdev->source.subsys.type != VIR_DOMAIN_HOSTDEV_SUBSYS_TYPE_PCI)
+ continue;
+ if (
hostdev->parent.data.net)
While this currently will work, I had
figured that (to allow for the
possibility of other smart hostdev types) we should check this way:
if (hostdev->parent.type == VIR_DOMAIN_DEVICE_NET &&
hostdev->parent.data.net)
I'm squashing that in to the three places you check for this.
+ if (qemuDomainHostdevNetConfigReplace(hostdev, uuid,
+ driver->stateDir) < 0)
+ goto resetvfnetconfig;
+ last_processed_hostdev_vf = i;
+ }
+
+ /* Loop 5: Now mark all the devices as active */
for (i = 0; i < pciDeviceListCount(pcidevs); i++) {
pciDevice *dev = pciDeviceListGet(pcidevs, i);
if (pciDeviceListAdd(driver->activePciHostdevs, dev) < 0) {
@@ -234,13 +429,13 @@ int qemuPrepareHostdevPCIDevices(struct qemud_driver *driver,
}
}
- /* Loop 5: Now remove the devices from inactive list. */
+ /* Loop 6: Now remove the devices from inactive list. */
for (i = 0; i < pciDeviceListCount(pcidevs); i++) {
pciDevice *dev = pciDeviceListGet(pcidevs, i);
pciDeviceListDel(driver->inactivePciHostdevs, dev);
}
- /* Loop 6: Now set the used_by_domain of the device in
+ /* Loop 7: Now set the used_by_domain of the device in
* driver->activePciHostdevs as domain name.
*/
for (i = 0; i < pciDeviceListCount(pcidevs); i++) {
@@ -252,7 +447,7 @@ int qemuPrepareHostdevPCIDevices(struct qemud_driver *driver,
pciDeviceSetUsedBy(activeDev, name);
}
- /* Loop 7: Now set the original states for hostdev def */
+ /* Loop 8: Now set the original states for hostdev def */
for (i = 0; i < nhostdevs; i++) {
pciDevice *dev;
pciDevice *pcidev;
@@ -284,7 +479,7 @@ int qemuPrepareHostdevPCIDevices(struct qemud_driver *driver,
pciFreeDevice(dev);
}
- /* Loop 8: Now steal all the devices from pcidevs */
+ /* Loop 9: Now steal all the devices from pcidevs */
while (pciDeviceListCount(pcidevs) > 0) {
pciDevice *dev = pciDeviceListGet(pcidevs, 0);
pciDeviceListSteal(pcidevs, dev);
@@ -302,6 +497,13 @@ inactivedevs:
pciDeviceListSteal(driver->activePciHostdevs, dev);
}
+resetvfnetconfig:
+ for (i = 0; i < last_processed_hostdev_vf; i++) {
+ virDomainHostdevDefPtr hostdev = hostdevs[i];
+ if (
hostdev->parent.data.net)
+ qemuDomainHostdevNetConfigRestore(hostdev, driver->stateDir);
+ }
+
reattachdevs:
for (i = 0; i < pciDeviceListCount(pcidevs); i++) {
pciDevice *dev = pciDeviceListGet(pcidevs, i);
@@ -317,10 +519,10 @@ static int
qemuPrepareHostPCIDevices(struct qemud_driver *driver,
virDomainDefPtr def)
{
- return qemuPrepareHostdevPCIDevices(driver, def->name, def->hostdevs,
def->nhostdevs);
+ return qemuPrepareHostdevPCIDevices(driver, def->name, def->uuid,
+ def->hostdevs, def->nhostdevs);
}
-
int
qemuPrepareHostdevUSBDevices(struct qemud_driver *driver,
const char *name,
@@ -494,8 +696,10 @@ void qemuDomainReAttachHostdevDevices(struct qemud_driver *driver,
return;
}
- /* Again 3 loops; mark all devices as inactive before reset
- * them and reset all the devices before re-attach */
+ /* Again 4 loops; mark all devices as inactive before reset
+ * them and reset all the devices before re-attach.
+ * Attach mac and port profile parameters to devices
+ */
for (i = 0; i < pciDeviceListCount(pcidevs); i++) {
pciDevice *dev = pciDeviceListGet(pcidevs, i);
pciDevice *activeDev = NULL;
@@ -514,6 +718,20 @@ void qemuDomainReAttachHostdevDevices(struct qemud_driver *driver,
pciDeviceListSteal(driver->activePciHostdevs, dev);
}
+ /*
+ * For SRIOV net host devices, unset mac and port profile before
+ * reset and reattach device
+ */
+ for (i = 0; i < nhostdevs; i++) {
+ virDomainHostdevDefPtr hostdev = hostdevs[i];
+ if (hostdev->mode != VIR_DOMAIN_HOSTDEV_MODE_SUBSYS)
+ continue;
+ if (hostdev->source.subsys.type != VIR_DOMAIN_HOSTDEV_SUBSYS_TYPE_PCI)
+ continue;
+ if (
hostdev->parent.data.net)
+ qemuDomainHostdevNetConfigRestore(hostdev, driver->stateDir);
+ }
+
for (i = 0; i < pciDeviceListCount(pcidevs); i++) {
pciDevice *dev = pciDeviceListGet(pcidevs, i);
if (pciResetDevice(dev, driver->activePciHostdevs,
@@ -540,5 +758,6 @@ void qemuDomainReAttachHostDevices(struct qemud_driver *driver,
if (!def->nhostdevs)
return;
- qemuDomainReAttachHostdevDevices(driver, def->name, def->hostdevs,
def->nhostdevs);
+ qemuDomainReAttachHostdevDevices(driver, def->name, def->hostdevs,
+ def->nhostdevs);
}
diff --git a/src/qemu/qemu_hostdev.h b/src/qemu/qemu_hostdev.h
index d852f5b..173e4f4 100644
--- a/src/qemu/qemu_hostdev.h
+++ b/src/qemu/qemu_hostdev.h
@@ -31,6 +31,7 @@ int qemuUpdateActivePciHostdevs(struct qemud_driver *driver,
virDomainDefPtr def);
int qemuPrepareHostdevPCIDevices(struct qemud_driver *driver,
const char *name,
+ const unsigned char *uuid,
virDomainHostdevDefPtr *hostdevs,
int nhostdevs);
int qemuPrepareHostdevUSBDevices(struct qemud_driver *driver,
@@ -46,6 +47,11 @@ void qemuDomainReAttachHostdevDevices(struct qemud_driver *driver,
int nhostdevs);
void qemuDomainReAttachHostDevices(struct qemud_driver *driver,
virDomainDefPtr def);
-
+int qemuDomainHostdevIsVirtualFunction(virDomainHostdevDefPtr hostdev);
+int qemuDomainHostdevNetConfigReplace(virDomainHostdevDefPtr hostdev,
+ const unsigned char *uuid,
+ char *stateDir);
+int qemuDomainHostdevNetConfigRestore(virDomainHostdevDefPtr hostdev,
+ char *stateDir);
#endif /* __QEMU_HOSTDEV_H__ */
diff --git a/src/qemu/qemu_hotplug.c b/src/qemu/qemu_hotplug.c
index 50563c5..c5ed9f7 100644
--- a/src/qemu/qemu_hotplug.c
+++ b/src/qemu/qemu_hotplug.c
@@ -927,7 +927,8 @@ int qemuDomainAttachHostPciDevice(struct qemud_driver *driver,
return -1;
}
- if (qemuPrepareHostdevPCIDevices(driver, vm->def->name, &hostdev, 1) <
0)
+ if (qemuPrepareHostdevPCIDevices(driver, vm->def->name, vm->def->uuid,
+ &hostdev, 1) < 0)
return -1;
if (qemuCapsGet(priv->qemuCaps, QEMU_CAPS_DEVICE)) {
@@ -1886,6 +1887,13 @@ qemuDomainDetachHostPciDevice(struct qemud_driver *driver,
if (ret < 0)
return -1;
+ /*
+ * For SRIOV net host devices, unset mac and port profile before
+ * reset and reattach device
+ */
+ if (
detach->parent.data.net)
+ qemuDomainHostdevNetConfigRestore(detach, driver->stateDir);
+
pci = pciGetDevice(subsys->u.pci.domain, subsys->u.pci.bus,
subsys->u.pci.slot, subsys->u.pci.function);
if (pci) {
It turned out just like I'd hoped it would!
ACK with those small nits (which I'm applying before I push).