12:31 a.m.
I've noticed a SIGSEGV-ing libvirtd on the destination when the qemu
died too quickly = in Prepare phase. What is happening here is:
1) [Thread 3493] We are in qemuMigrationPrepareAny() and calling
qemuProcessStart() which subsequently calls qemuProcessWaitForMonitor()
and qemuConnectMonitor(). So far so good. The qemuMonitorOpen()
succeeds, however switching monitor to QMP mode fails as qemu died
meanwhile. That is qemuMonitorSetCapabilities() returns -1.
2013-10-08 15:54:10.629+0000: 3493: debug : qemuMonitorSetCapabilities:1356 :
mon=0x14a53da0
2013-10-08 15:54:10.630+0000: 3493: debug : qemuMonitorJSONCommandWithFd:262 : Send
command
'{"execute":"qmp_capabilities","id":"libvirt-1"}'
for write with FD -1
2013-10-08 15:54:10.630+0000: 3493: debug : virEventPollUpdateHandle:147 :
EVENT_POLL_UPDATE_HANDLE: watch=17 events=13
...
2013-10-08 15:54:10.631+0000: 3493: debug : qemuMonitorSend:956 : QEMU_MONITOR_SEND_MSG:
mon=0x14a53da0
msg={"execute":"qmp_capabilities","id":"libvirt-1"}
fd=-1
2013-10-08 15:54:10.631+0000: 3262: debug : virEventPollRunOnce:641 : Poll got 1 event(s)
2) [Thread 3262] The event loop is trying to do the talking to monitor.
However, qemu is dead already, remember?
2013-10-08 15:54:13.436+0000: 3262: error : qemuMonitorIORead:551 : Unable to read from
monitor: Connection reset by peer
2013-10-08 15:54:13.516+0000: 3262: debug : virFileClose:90 : Closed fd 25
...
2013-10-08 15:54:13.533+0000: 3493: debug : qemuMonitorSend:968 : Send command resulted in
error internal error: early end of file from monitor: possible problem:
3) [Thread 3493] qemuProcessStart() failed. No big deal. Go to the
'endjob' label and subsequently to the 'cleanup'. Since the domain is
not persistent and ret is -1, the qemuDomainRemoveInactive() is called.
This has an (unpleasant) effect of virObjectUnref()-in the @vm object.
Unpleasant because the event loop which is about to trigger EOF callback
still holds a pointer to the @vm (not the reference). See the valgrind
output below.
4) [Thread 3262] So the even loop starts triggering EOF:
2013-10-08 15:54:13.542+0000: 3262: debug : qemuMonitorIO:729 : Triggering EOF callback
2013-10-08 15:54:13.543+0000: 3262: debug : qemuProcessHandleMonitorEOF:294 : Received EOF
on 0x14549110 'migt10'
And the monitor is cleaned up. This results in calling
qemuProcessHandleMonitorEOF with the @vm pointer passed. The pointer is
kept in qemuMonitor struct.
==3262== Thread 1:
==3262== Invalid read of size 4
==3262== at 0x77ECCAA: pthread_mutex_lock (in /lib64/libpthread-2.15.so)
==3262== by 0x52FAA06: virMutexLock (virthreadpthread.c:85)
==3262== by 0x52E3891: virObjectLock (virobject.c:320)
==3262== by 0x11626743: qemuProcessHandleMonitorEOF (qemu_process.c:296)
==3262== by 0x11642593: qemuMonitorIO (qemu_monitor.c:730)
==3262== by 0x52BD526: virEventPollDispatchHandles (vireventpoll.c:501)
==3262== by 0x52BDD49: virEventPollRunOnce (vireventpoll.c:648)
==3262== by 0x52BBC68: virEventRunDefaultImpl (virevent.c:274)
==3262== by 0x542D3D9: virNetServerRun (virnetserver.c:1112)
==3262== by 0x11F368: main (libvirtd.c:1513)
==3262== Address 0x14549128 is 24 bytes inside a block of size 136 free'd
==3262== at 0x4C2AF5C: free (in /usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so)
==3262== by 0x529B1FF: virFree (viralloc.c:580)
==3262== by 0x52E3703: virObjectUnref (virobject.c:270)
==3262== by 0x531557E: virDomainObjListRemove (domain_conf.c:2355)
==3262== by 0x1160E899: qemuDomainRemoveInactive (qemu_domain.c:2061)
==3262== by 0x1163A0C6: qemuMigrationPrepareAny (qemu_migration.c:2450)
==3262== by 0x1163A923: qemuMigrationPrepareDirect (qemu_migration.c:2626)
==3262== by 0x11682D71: qemuDomainMigratePrepare3Params (qemu_driver.c:10309)
==3262== by 0x53B0976: virDomainMigratePrepare3Params (libvirt.c:7266)
==3262== by 0x1502D3: remoteDispatchDomainMigratePrepare3Params (remote.c:4797)
==3262== by 0x12DECA: remoteDispatchDomainMigratePrepare3ParamsHelper
(remote_dispatch.h:5741)
==3262== by 0x54322EB: virNetServerProgramDispatchCall (virnetserverprogram.c:435)
The mon->vm is set in qemuMonitorOpenInternal() which is the correct
place to increase @vm ref counter. The correct place to decrease the ref
counter is then qemuMonitorDispose(). However, in order to avoid cyclic
calling of dispose functions, we must use hack, and set priv->mon to
NULL. The qemuDomainObjPrivateFree won't call us again then. This
describes the last two chunks of the commit. The others are there for
handling virObjectRef() and virObjectUnref() correctly. So far it
doesn't work well with NULL virClassPtr :)
Signed-off-by: Michal Privoznik <mprivozn(a)redhat.com>
---
Yet another one of those patches, where chasing it down took a half of a day
and description what went wrong is longer than a few lines of fix.
src/qemu/qemu_capabilities.c | 14 ++++++++++----
src/qemu/qemu_monitor.c | 12 ++++++++++++
2 files changed, 22 insertions(+), 4 deletions(-)
diff --git a/src/qemu/qemu_capabilities.c b/src/qemu/qemu_capabilities.c
index 7c39c1c..17095b4 100644
--- a/src/qemu/qemu_capabilities.c
+++ b/src/qemu/qemu_capabilities.c
@@ -2587,7 +2587,8 @@ virQEMUCapsInitQMP(virQEMUCapsPtr qemuCaps,
char *monpath = NULL;
char *pidfile = NULL;
pid_t pid = 0;
- virDomainObj vm;
+ virDomainObjPtr vm = NULL;
+ virDomainXMLOptionPtr xmlopt = NULL;
/* the ".sock" sufix is important to avoid a possible clash with a qemu
* domain called "capabilities"
@@ -2650,10 +2651,13 @@ virQEMUCapsInitQMP(virQEMUCapsPtr qemuCaps,
goto cleanup;
}
- memset(&vm, 0, sizeof(vm));
- vm.pid = pid;
+ if (!(xmlopt = virDomainXMLOptionNew(NULL, NULL, NULL)) ||
+ !(vm = virDomainObjNew(xmlopt)))
+ goto cleanup;
+
+ vm->pid = pid;
- if (!(mon = qemuMonitorOpen(&vm, &config, true, &callbacks, NULL))) {
+ if (!(mon = qemuMonitorOpen(vm, &config, true, &callbacks, NULL))) {
ret = 0;
goto cleanup;
}
@@ -2673,6 +2677,8 @@ cleanup:
virCommandFree(cmd);
VIR_FREE(monarg);
VIR_FREE(monpath);
+ virObjectUnref(vm);
+ virObjectUnref(xmlopt);
if (pid != 0) {
char ebuf[1024];
diff --git a/src/qemu/qemu_monitor.c b/src/qemu/qemu_monitor.c
index a601ee0..2cf68da 100644
--- a/src/qemu/qemu_monitor.c
+++ b/src/qemu/qemu_monitor.c
@@ -251,10 +251,21 @@ static char * qemuMonitorEscapeNonPrintable(const char *text)
static void qemuMonitorDispose(void *obj)
{
qemuMonitorPtr mon = obj;
+ qemuDomainObjPrivatePtr priv = mon->vm->privateData;
VIR_DEBUG("mon=%p", mon);
if (mon->cb && mon->cb->destroy)
(mon->cb->destroy)(mon, mon->vm, mon->callbackOpaque);
+ /* HACK: priv->mon is still non-NULL. If we are the last to hold the
+ * reference to mon->vm, the qemuDomainObjPrivateFree() will call
+ * qemuMonitorClose() and hence us again. IOW, dispose callback which calls
+ * dispose callback which calls dispose callback ...
+ * Moreover, not all domains have privateData - for instance a dummy domain
+ * object created in virQEMUCapsInitQMP(). */
+ if (priv)
+ priv->mon = NULL;
+ virObjectUnref(mon->vm);
+
virCondDestroy(&mon->notify);
VIR_FREE(mon->buffer);
virJSONValueFree(mon->options);
@@ -781,6 +792,7 @@ qemuMonitorOpenInternal(virDomainObjPtr vm,
}
mon->fd = fd;
mon->hasSendFD = hasSendFD;
+ virObjectRef(vm);
mon->vm = vm;
mon->json = json;
if (json)
--
1.8.1.5