9:32 p.m.
Add scsi hostdev, it looks like:
<hostdev mode='subsystem' type='scsi'>
<source>
<adapter name='scsi_host0'/>
<address bus='0' target='0' unit='0'/>
</source>
<address type='drive' controller='0' bus='0'
target='4' unit='8'/>
</hostdev>
The only parameter in -drive affects scsi-generic is readonly. Introduce
<readonly/> to <hostdevsubsysscsi>.
Signed-off-by: Han Cheng <hanc.fnst(a)cn.fujitsu.com>
---
docs/formatdomain.html.in | 38 +++++++--
docs/schemas/domaincommon.rng | 29 +++++++
src/conf/domain_audit.c | 10 +++
src/conf/domain_conf.c | 181 ++++++++++++++++++++++++++++++++++++++++-
src/conf/domain_conf.h | 8 ++
5 files changed, 257 insertions(+), 9 deletions(-)
diff --git a/docs/formatdomain.html.in b/docs/formatdomain.html.in
index 6a6bdbc..f8aff6a 100644
--- a/docs/formatdomain.html.in
+++ b/docs/formatdomain.html.in
@@ -2190,13 +2190,13 @@
<h4><a name="elementsHostDev">Host device
assignment</a></h4>
- <h5><a href="elementsHostDevSubsys">USB / PCI
devices</a></h5>
+ <h5><a href="elementsHostDevSubsys">USB / PCI / SCSI
devices</a></h5>
<p>
- USB and PCI devices attached to the host can be passed through
+ USB, PCI and SCSI devices attached to the host can be passed through
to the guest using the <code>hostdev</code> element.
- <span class="since">since after 0.4.4 for USB and 0.6.0 for PCI
- (KVM only)</span>:
+ <span class="since">since after 0.4.4 for USB, 0.6.0 for PCI(KVM
only)
+ and 1.0.5 for SCSI(KVM only)</span>:
</p>
<pre>
@@ -2227,12 +2227,29 @@
</devices>
...</pre>
+ <p>or:</p>
+
+<pre>
+ ...
+ <devices>
+ <hostdev mode='subsystem' type='scsi'>
+ <source>
+ <adapter name='scsi_host0'/>
+ <address type='scsi' bus='0' target='0'
unit='0'/>
+ </source>
+ <readonly/>
+ <address type='scsi' controller='0' bus='0'
target='0' unit='0'/>
+ </hostdev>
+ </devices>
+ ...</pre>
+
<dl>
<dt><code>hostdev</code></dt>
<dd>The <code>hostdev</code> element is the main container for
describing
host devices. For usb device passthrough <code>mode</code> is always
- "subsystem" and <code>type</code> is "usb" for a
USB device and "pci"
- for a PCI device. When <code>managed</code> is "yes" for a
PCI
+ "subsystem" and <code>type</code> is "usb" for a
USB device, "pci"
+ for a PCI device and "scsi" for a SCSI device. When
+ <code>managed</code> is "yes" for a PCI
device, it is detached from the host before being passed on to
the guest, and reattached to the host after the guest exits.
If <code>managed</code> is omitted or "no", and for USB
@@ -2242,13 +2259,16 @@
hot-plugging the device,
and <code>virNodeDeviceReAttach</code> (or <code>virsh
nodedev-reattach</code>) after hot-unplug or stopping the
- guest.</dd>
+ guest. For SCSI device, user is responsible to make sure the device
+ is not used by host.</dd>
<dt><code>source</code></dt>
<dd>The source element describes the device as seen from the host.
The USB device can either be addressed by vendor / product id using the
<code>vendor</code> and <code>product</code> elements or by
the device's
address on the hosts using the <code>address</code> element. PCI
devices
on the other hand can only be described by their <code>address</code>.
+ SCSI devices can be described by <code>adapter</code> and
+ <code>address</code>.
<span class="since">Since 1.0.0</span>, the
<code>source</code> element
of USB devices may contain <code>startupPolicy</code> attribute which
can
@@ -2275,6 +2295,9 @@
<code>id</code> attribute that specifies the USB vendor and product
id.
The ids can be given in decimal, hexadecimal (starting with 0x) or
octal (starting with 0) form.</dd>
+ <dt><code>readonly</code></dt>
+ <dd>Indicates that the device is readonly, only valid for SCSI device.
+ <span class="since">Since 1.0.5</span></dd>
<dt><code>boot</code></dt>
<dd>Specifies that the device is bootable. The
<code>order</code>
attribute determines the order in which devices will be tried during
@@ -2283,6 +2306,7 @@
<a href="#elementsOSBIOS">BIOS bootloader</a> section.
<span class="since">Since 0.8.8</span> for PCI devices,
<span class="since">Since 1.0.1</span> for USB devices.
+ <span class="since">Since 1.0.5</span> for SCSI devices.
<dt><code>rom</code></dt>
<dd>The <code>rom</code> element is used to change how a PCI
device's ROM is presented to the guest. The optional
<code>bar</code>
diff --git a/docs/schemas/domaincommon.rng b/docs/schemas/domaincommon.rng
index 2c31f76..d4d2bb9 100644
--- a/docs/schemas/domaincommon.rng
+++ b/docs/schemas/domaincommon.rng
@@ -2988,6 +2988,7 @@
<choice>
<ref name="hostdevsubsyspci"/>
<ref name="hostdevsubsysusb"/>
+ <ref name="hostdevsubsysscsi"/>
</choice>
</define>
@@ -3043,6 +3044,23 @@
</element>
</define>
+ <define name="hostdevsubsysscsi">
+ <attribute name="type">
+ <value>scsi</value>
+ </attribute>
+ <element name="source">
+ <ref name="sourceinfoadapter"/>
+ <element name="address">
+ <ref name="scsiaddress"/>
+ </element>
+ </element>
+ <optional>
+ <element name='readonly'>
+ <empty/>
+ </element>
+ </optional>
+ </define>
+
<define name="hostdevcapsstorage">
<attribute name="type">
<value>storage</value>
@@ -3098,6 +3116,17 @@
</attribute>
</element>
</define>
+ <define name="scsiaddress">
+ <attribute name="bus">
+ <ref name="driveBus"/>
+ </attribute>
+ <attribute name="target">
+ <ref name="driveTarget"/>
+ </attribute>
+ <attribute name="unit">
+ <ref name="driveUnit"/>
+ </attribute>
+ </define>
<define name="usbportaddress">
<attribute name="bus">
<ref name="usbAddr"/>
diff --git a/src/conf/domain_audit.c b/src/conf/domain_audit.c
index a776058..2fb5989 100644
--- a/src/conf/domain_audit.c
+++ b/src/conf/domain_audit.c
@@ -398,6 +398,16 @@ virDomainAuditHostdev(virDomainObjPtr vm, virDomainHostdevDefPtr
hostdev,
goto cleanup;
}
break;
+ case VIR_DOMAIN_HOSTDEV_SUBSYS_TYPE_SCSI:
+ if (virAsprintf(&address, "%s:%d:%d:%d",
+ hostdev->source.subsys.u.scsi.adapter,
+ hostdev->source.subsys.u.scsi.bus,
+ hostdev->source.subsys.u.scsi.target,
+ hostdev->source.subsys.u.scsi.unit) < 0) {
+ VIR_WARN("OOM while encoding audit message");
+ goto cleanup;
+ }
+ break;
default:
VIR_WARN("Unexpected hostdev type while encoding audit message:
%d",
hostdev->source.subsys.type);
diff --git a/src/conf/domain_conf.c b/src/conf/domain_conf.c
index 492e0b7..d640f65 100644
--- a/src/conf/domain_conf.c
+++ b/src/conf/domain_conf.c
@@ -578,7 +578,8 @@ VIR_ENUM_IMPL(virDomainHostdevMode, VIR_DOMAIN_HOSTDEV_MODE_LAST,
VIR_ENUM_IMPL(virDomainHostdevSubsys, VIR_DOMAIN_HOSTDEV_SUBSYS_TYPE_LAST,
"usb",
- "pci")
+ "pci",
+ "scsi")
VIR_ENUM_IMPL(virDomainHostdevCaps, VIR_DOMAIN_HOSTDEV_CAPS_TYPE_LAST,
"storage",
@@ -1604,7 +1605,8 @@ void virDomainHostdevDefClear(virDomainHostdevDefPtr def)
if (def->parent.type == VIR_DOMAIN_DEVICE_NONE)
virDomainDeviceInfoFree(def->info);
- if (def->mode == VIR_DOMAIN_HOSTDEV_MODE_CAPABILITIES) {
+ switch (def->mode) {
+ case VIR_DOMAIN_HOSTDEV_MODE_CAPABILITIES:
switch (def->source.caps.type) {
case VIR_DOMAIN_HOSTDEV_CAPS_TYPE_STORAGE:
VIR_FREE(def->source.caps.u.storage.block);
@@ -1616,6 +1618,11 @@ void virDomainHostdevDefClear(virDomainHostdevDefPtr def)
VIR_FREE(def->source.caps.u.net.iface);
break;
}
+ break;
+ case VIR_DOMAIN_HOSTDEV_MODE_SUBSYS:
+ if (def->source.subsys.type == VIR_DOMAIN_HOSTDEV_SUBSYS_TYPE_SCSI)
+ VIR_FREE(def->source.subsys.u.scsi.adapter);
+ break;
}
}
@@ -3319,6 +3326,92 @@ virDomainParseLegacyDeviceAddress(char *devaddr,
}
static int
+virDomainHostdevSubsysScsiDefParseXML(const xmlNodePtr node,
+ virDomainHostdevDefPtr def)
+{
+ int ret = -1;
+ bool got_address = false, got_adapter = false;
+ xmlNodePtr cur;
+ char *bus = NULL, *target = NULL, *unit = NULL;
+
+ cur = node->children;
+ while (cur != NULL) {
+ if (cur->type == XML_ELEMENT_NODE) {
+ if (xmlStrEqual(cur->name, BAD_CAST "address")) {
+ if (got_address) {
+ virReportError(VIR_ERR_XML_ERROR,
+ _("more than one addresses are
specified"));
+ goto cleanup;
+ }
+ if (!(bus = virXMLPropString(cur, "bus"))) {
+ virReportError(VIR_ERR_XML_ERROR,
+ _("bus must be specified for scsi hostdev
address"));
+ goto cleanup;
+ }
+ if (virStrToLong_ui(bus, NULL, 0, &def->source.subsys.u.scsi.bus)
< 0) {
+ virReportError(VIR_ERR_INTERNAL_ERROR,
+ _("cannot parse bus %s"), bus);
+ goto cleanup;
+ }
+ if (!(target = virXMLPropString(cur, "target"))) {
+ virReportError(VIR_ERR_XML_ERROR,
+ _("target must be specified for scsi hostdev
address"));
+ goto cleanup;
+ }
+ if (virStrToLong_ui(target, NULL, 0,
&def->source.subsys.u.scsi.target) < 0) {
+ virReportError(VIR_ERR_INTERNAL_ERROR,
+ _("cannot parse target %s"), target);
+ goto cleanup;
+ }
+ if (!(unit = virXMLPropString(cur, "unit"))) {
+ virReportError(VIR_ERR_XML_ERROR,
+ _("unit must be specified for scsi hostdev
address"));
+ goto cleanup;
+ }
+ if (virStrToLong_ui(unit, NULL, 0,
&def->source.subsys.u.scsi.unit) < 0) {
+ virReportError(VIR_ERR_INTERNAL_ERROR,
+ _("cannot parse unit %s"), unit);
+ goto cleanup;
+ }
+ got_address = true;
+ } else if (xmlStrEqual(cur->name, BAD_CAST "adapter")) {
+ if (got_adapter) {
+ virReportError(VIR_ERR_XML_ERROR,
+ _("more than one adapters are specified"));
+ goto cleanup;
+ }
+ if (!(def->source.subsys.u.scsi.adapter =
+ virXMLPropString(cur, "name"))) {
+ virReportError(VIR_ERR_XML_ERROR,
+ _("adapter must be specified for scsi hostdev
address"));
+ goto cleanup;
+ }
+ got_adapter = true;
+ } else {
+ virReportError(VIR_ERR_XML_ERROR,
+ _("unknown scsi source type '%s'"),
+ cur->name);
+ goto cleanup;
+ }
+ }
+ cur = cur->next;
+ }
+
+ if (!got_address || !got_adapter) {
+ virReportError(VIR_ERR_XML_ERROR,
+ _("'adapter' and 'address' must be
specified"));
+ goto cleanup;
+ }
+
+ ret = 0;
+cleanup:
+ VIR_FREE(bus);
+ VIR_FREE(target);
+ VIR_FREE(unit);
+ return ret;
+}
+
+static int
virDomainHostdevSubsysUsbDefParseXML(const xmlNodePtr node,
virDomainHostdevDefPtr def)
{
@@ -3613,6 +3706,10 @@ virDomainHostdevDefParseXMLSubsys(xmlNodePtr node,
if (virDomainHostdevSubsysUsbDefParseXML(sourcenode, def) < 0)
goto error;
break;
+ case VIR_DOMAIN_HOSTDEV_SUBSYS_TYPE_SCSI:
+ if (virDomainHostdevSubsysScsiDefParseXML(sourcenode, def) < 0)
+ goto error;
+ break;
default:
virReportError(VIR_ERR_CONFIG_UNSUPPORTED,
_("address type='%s' not supported in hostdev
interfaces"),
@@ -8322,6 +8419,8 @@ virDomainHostdevDefParseXML(const xmlNodePtr node,
}
if (def->mode == VIR_DOMAIN_HOSTDEV_MODE_SUBSYS) {
+ xmlNodePtr cur;
+ unsigned int readonly = 0;
switch (def->source.subsys.type) {
case VIR_DOMAIN_HOSTDEV_SUBSYS_TYPE_PCI:
if (def->info->type != VIR_DOMAIN_DEVICE_ADDRESS_TYPE_NONE &&
@@ -8330,6 +8429,20 @@ virDomainHostdevDefParseXML(const xmlNodePtr node,
_("PCI host devices must use 'pci' address
type"));
goto error;
}
+
+ break;
+ case VIR_DOMAIN_HOSTDEV_SUBSYS_TYPE_SCSI:
+ cur = node->children;
+ while (cur != NULL) {
+ if (cur->type == XML_ELEMENT_NODE) {
+ if (readonly == 0 &&
+ xmlStrEqual(cur->name, BAD_CAST "readonly"))
+ readonly = 1;
+ }
+ cur = cur->next;
+ }
+ def->readonly = readonly;
+
break;
}
}
@@ -8858,6 +8971,17 @@ virDomainHostdevMatchSubsysPCI(virDomainHostdevDefPtr a,
return 0;
}
+static int
+virDomainHostdevMatchSubsysSCSI(virDomainHostdevDefPtr a,
+ virDomainHostdevDefPtr b)
+{
+ if (STREQ(a->source.subsys.u.scsi.adapter, b->source.subsys.u.scsi.adapter)
&&
+ a->source.subsys.u.scsi.bus == b->source.subsys.u.scsi.bus &&
+ a->source.subsys.u.scsi.target == b->source.subsys.u.scsi.target
&&
+ a->source.subsys.u.scsi.unit == b->source.subsys.u.scsi.unit)
+ return 1;
+ return 0;
+}
static int
virDomainHostdevMatchSubsys(virDomainHostdevDefPtr a,
@@ -8871,6 +8995,8 @@ virDomainHostdevMatchSubsys(virDomainHostdevDefPtr a,
return virDomainHostdevMatchSubsysPCI(a, b);
case VIR_DOMAIN_HOSTDEV_SUBSYS_TYPE_USB:
return virDomainHostdevMatchSubsysUSB(a, b);
+ case VIR_DOMAIN_HOSTDEV_SUBSYS_TYPE_SCSI:
+ return virDomainHostdevMatchSubsysSCSI(a, b);
}
return 0;
}
@@ -11028,6 +11154,18 @@ virDomainDefParseXML(xmlDocPtr xml,
goto error;
}
+ if (hostdev->source.subsys.type == VIR_DOMAIN_HOSTDEV_SUBSYS_TYPE_SCSI
&&
+ hostdev->info->type == VIR_DOMAIN_DEVICE_ADDRESS_TYPE_NONE) {
+ /* We define default mapping to be 1 controller, 1 bus,
+ * 1 target and many units. And we reserve first 16 unit for
+ * disk usage in virDomainDiskDefAssignAddress */
+ hostdev->info->type = VIR_DOMAIN_DEVICE_ADDRESS_TYPE_DRIVE;
+ hostdev->info->addr.drive.controller = 0;
+ hostdev->info->addr.drive.bus = 0;
+ hostdev->info->addr.drive.target = 0;
+ hostdev->info->addr.drive.unit = 16 + i;
+ }
+
def->hostdevs[def->nhostdevs++] = hostdev;
}
VIR_FREE(nodes);
@@ -12600,6 +12738,30 @@ virDomainDefMaybeAddSmartcardController(virDomainDefPtr def)
return 0;
}
+static int
+virDomainDefMaybeAddHostdevSCSIcontroller(virDomainDefPtr def)
+{
+ /* Look for any hostdev scsi dev */
+ int i;
+ int maxController = -1;
+ virDomainHostdevDefPtr hostdev;
+
+ for (i = 0; i < def->nhostdevs; i++) {
+ hostdev = def->hostdevs[i];
+ if (hostdev->mode == VIR_DOMAIN_HOSTDEV_MODE_SUBSYS &&
+ hostdev->source.subsys.type == VIR_DOMAIN_HOSTDEV_SUBSYS_TYPE_SCSI
&&
+ (int)hostdev->info->addr.drive.controller > maxController) {
+ maxController = hostdev->info->addr.drive.controller;
+ }
+ }
+
+ for (i = 0; i <= maxController; i++) {
+ if (virDomainDefMaybeAddController(def, VIR_DOMAIN_CONTROLLER_TYPE_SCSI, i) <
0)
+ return -1;
+ }
+
+ return 0;
+}
/*
* Based on the declared <address/> info for any devices,
@@ -12636,6 +12798,9 @@ virDomainDefAddImplicitControllers(virDomainDefPtr def)
if (virDomainDefMaybeAddSmartcardController(def) < 0)
return -1;
+ if (virDomainDefMaybeAddHostdevSCSIcontroller(def) < 0)
+ return -1;
+
return 0;
}
@@ -13487,6 +13652,15 @@ virDomainHostdevDefFormatSubsys(virBufferPtr buf,
virBufferAdjustIndent(buf, 2);
switch (def->source.subsys.type)
{
+ case VIR_DOMAIN_HOSTDEV_SUBSYS_TYPE_SCSI:
+ virBufferAsprintf(buf, "<adapter name='%s'/>\n",
+ def->source.subsys.u.scsi.adapter);
+ virBufferAsprintf(buf, "<address %sbus='%d' target='%d'
unit='%d'/>\n",
+ includeTypeInAddr ? "type='scsi' " :
"",
+ def->source.subsys.u.scsi.bus,
+ def->source.subsys.u.scsi.target,
+ def->source.subsys.u.scsi.unit);
+ break;
case VIR_DOMAIN_HOSTDEV_SUBSYS_TYPE_USB:
if (def->source.subsys.u.usb.vendor) {
virBufferAsprintf(buf, "<vendor id='0x%.4x'/>\n",
@@ -14742,6 +14916,9 @@ virDomainHostdevDefFormat(virBufferPtr buf,
case VIR_DOMAIN_HOSTDEV_MODE_SUBSYS:
if (virDomainHostdevDefFormatSubsys(buf, def, flags, false) < 0)
return -1;
+ if (def->source.subsys.type == VIR_DOMAIN_HOSTDEV_SUBSYS_TYPE_SCSI &&
+ def->readonly)
+ virBufferAsprintf(buf, "<readonly/>\n");
break;
case VIR_DOMAIN_HOSTDEV_MODE_CAPABILITIES:
if (virDomainHostdevDefFormatCaps(buf, def) < 0)
diff --git a/src/conf/domain_conf.h b/src/conf/domain_conf.h
index 08b8e48..3fdbf91 100644
--- a/src/conf/domain_conf.h
+++ b/src/conf/domain_conf.h
@@ -380,6 +380,7 @@ enum virDomainHostdevMode {
enum virDomainHostdevSubsysType {
VIR_DOMAIN_HOSTDEV_SUBSYS_TYPE_USB,
VIR_DOMAIN_HOSTDEV_SUBSYS_TYPE_PCI,
+ VIR_DOMAIN_HOSTDEV_SUBSYS_TYPE_SCSI,
VIR_DOMAIN_HOSTDEV_SUBSYS_TYPE_LAST
};
@@ -399,6 +400,12 @@ struct _virDomainHostdevSubsys {
unsigned vendor;
unsigned product;
} usb;
+ struct {
+ char *adapter;
+ unsigned bus;
+ unsigned target;
+ unsigned unit;
+ } scsi;
virDevicePCIAddress pci; /* host address */
} u;
};
@@ -437,6 +444,7 @@ struct _virDomainHostdevDef {
int startupPolicy; /* enum virDomainStartupPolicy */
unsigned int managed : 1;
unsigned int missing : 1;
+ unsigned int readonly : 1; /* readonly is only used for scsi hostdev */
union {
virDomainHostdevSubsys subsys;
virDomainHostdevCaps caps;
--
1.7.1