11:39 a.m.
Noticed a misuse of 'to' while testing my event regression under
polkit ACLs, and decided to review the entire conf files for
other legibility bugs.
* daemon/libvirtd.conf: Use correct grammar.
* src/qemu/qemu.conf: Likewise.
Signed-off-by: Eric Blake <eblake(a)redhat.com>
---
Pushing under the trivial rule.
daemon/libvirtd.conf | 24 ++++++++++++------------
src/qemu/qemu.conf | 14 +++++++-------
2 files changed, 19 insertions(+), 19 deletions(-)
diff --git a/daemon/libvirtd.conf b/daemon/libvirtd.conf
index 5353927..538acae 100644
--- a/daemon/libvirtd.conf
+++ b/daemon/libvirtd.conf
@@ -63,7 +63,7 @@
# unique on the immediate broadcast network.
#
# The default is "Virtualization Host HOSTNAME", where HOSTNAME
-# is subsituted for the short hostname of the machine (without domain)
+# is substituted for the short hostname of the machine (without domain)
#
#mdns_name = "Virtualization Host Joe Demo"
@@ -83,8 +83,8 @@
# Set the UNIX socket permissions for the R/O socket. This is used
# for monitoring VM status only
#
-# Default allows any user. If setting group ownership may want to
-# restrict this to:
+# Default allows any user. If setting group ownership, you may want to
+# restrict this too.
#unix_sock_ro_perms = "0777"
# Set the UNIX socket permissions for the R/W socket. This is used
@@ -94,7 +94,7 @@
# the default will change to allow everyone (eg, 0777)
#
# If not using PolicyKit and setting group ownership for access
-# control then you may want to relax this to:
+# control, then you may want to relax this too.
#unix_sock_rw_perms = "0770"
# Set the name of the directory in which sockets will be found/created.
@@ -113,7 +113,7 @@
# - sasl: use SASL infrastructure. The actual auth scheme is then
# controlled from /etc/sasl2/libvirt.conf. For the TCP
# socket only GSSAPI & DIGEST-MD5 mechanisms will be used.
-# For non-TCP or TLS sockets, any scheme is allowed.
+# For non-TCP or TLS sockets, any scheme is allowed.
#
# - polkit: use PolicyKit to authenticate. This is only suitable
# for use on the UNIX sockets. The default policy will
@@ -216,7 +216,7 @@
#tls_no_verify_certificate = 1
-# A whitelist of allowed x509 Distinguished Names
+# A whitelist of allowed x509 Distinguished Names
# This list may contain wildcards such as
#
# "C=GB,ST=London,L=London,O=Red Hat,CN=*"
@@ -274,13 +274,13 @@
# The number of priority workers. If all workers from above
-# pool will stuck, some calls marked as high priority
+# pool are stuck, some calls marked as high priority
# (notably domainDestroy) can be executed in this pool.
#prio_workers = 5
# Total global limit on concurrent RPC calls. Should be
# at least as large as max_workers. Beyond this, RPC requests
-# will be read into memory and queued. This directly impact
+# will be read into memory and queued. This directly impacts
# memory usage, currently each request requires 256 KB of
# memory. So by default up to 5 MB of memory is used
#
@@ -318,7 +318,7 @@
# 3: WARNING
# 4: ERROR
#
-# Multiple filter can be defined in a single @filters, they just need to be
+# Multiple filters can be defined in a single @filters, they just need to be
# separated by spaces.
#
# e.g. to only get warning or errors from the remote layer and only errors
@@ -340,7 +340,7 @@
# 3: WARNING
# 4: ERROR
#
-# Multiple output can be defined, they just need to be separated by spaces.
+# Multiple outputs can be defined, they just need to be separated by spaces.
# e.g. to log all warnings and errors to syslog under the libvirtd ident:
#log_outputs="3:syslog:libvirtd"
#
@@ -387,7 +387,7 @@
###################################################################
# Keepalive protocol:
# This allows libvirtd to detect broken client connections or even
-# dead client. A keepalive message is sent to a client after
+# dead clients. A keepalive message is sent to a client after
# keepalive_interval seconds of inactivity to check if the client is
# still responding; keepalive_count is a maximum number of keepalive
# messages that are allowed to be sent to the client without getting
@@ -396,7 +396,7 @@
# keepalive_interval * (keepalive_count + 1) seconds since the last
# message received from the client. If keepalive_interval is set to
# -1, libvirtd will never send keepalive requests; however clients
-# can still send them and the deamon will send responses. When
+# can still send them and the daemon will send responses. When
# keepalive_count is set to 0, connections will be automatically
# closed after keepalive_interval seconds of inactivity without
# sending any keepalive messages.
diff --git a/src/qemu/qemu.conf b/src/qemu/qemu.conf
index 17f1b10..e436084 100644
--- a/src/qemu/qemu.conf
+++ b/src/qemu/qemu.conf
@@ -58,7 +58,7 @@
#vnc_tls_x509_verify = 1
-# The default VNC password. Only 8 letters are significant for
+# The default VNC password. Only 8 bytes are significant for
# VNC passwords. This parameter is only used if the per-domain
# XML config does not already provide a password. To allow
# access without passwords, leave this commented out. An empty
@@ -180,7 +180,7 @@
# VNC WebSocket port policies, same rules apply as with remote display
# ports. VNC WebSockets use similar display <-> port mappings, with
-# the exception being that ports starts from 5700 instead of 5900.
+# the exception being that ports start from 5700 instead of 5900.
#
#remote_websocket_port_min = 5700
#remote_websocket_port_max = 65535
@@ -333,7 +333,7 @@
# disable guest hugepage backing.
#
# NB, within this mount point, guests will create memory backing files
-# in a location of $MOUNTPOINT/libvirt/qemu
+# in a location of $MOUNTPOINT/libvirt/qemu
#
#hugetlbfs_mount = "/dev/hugepages"
@@ -421,14 +421,14 @@
# Keepalive protocol:
# This allows qemu driver to detect broken connections to remote
# libvirtd during peer-to-peer migration. A keepalive message is
-# sent to the deamon after keepalive_interval seconds of inactivity
-# to check if the deamon is still responding; keepalive_count is a
+# sent to the daemon after keepalive_interval seconds of inactivity
+# to check if the daemon is still responding; keepalive_count is a
# maximum number of keepalive messages that are allowed to be sent
-# to the deamon without getting any response before the connection
+# to the daemon without getting any response before the connection
# is considered broken. In other words, the connection is
# automatically closed approximately after
# keepalive_interval * (keepalive_count + 1) seconds since the last
-# message received from the deamon. If keepalive_interval is set to
+# message received from the daemon. If keepalive_interval is set to
# -1, qemu driver will not send keepalive requests during
# peer-to-peer migration; however, the remote libvirtd can still
# send them and source libvirtd will send responses. When
--
1.8.5.3