[Libvirt-ci] Build failed in Jenkins: libvirt-dbus-master-rpm » libvirt-centos-7 #199
See <https://ci.centos.org/job/libvirt-dbus-master-rpm/systems=libvirt-centos-7/199/display/redirect> ------------------------------------------ Started by upstream project "libvirt-dbus-master-rpm" build number 199 originally caused by: Started by upstream project "libvirt-dbus-master-check" build number 218 originally caused by: Started by upstream project "libvirt-dbus-master-build" build number 252 originally caused by: Started by an SCM change [EnvInject] - Loading node environment variables. Building remotely on libvirt-centos-7 (libvirt) in workspace <https://ci.centos.org/job/libvirt-dbus-master-rpm/systems=libvirt-centos-7/ws/> [libvirt-dbus-master] $ /bin/sh -xe /tmp/jenkins1356104670294629127.sh + cd build + sed -i -e 's/BuildRequires: osinfo-db.*//' libvirt-dbus.spec + sed -i -e 's/BuildRequires: libvirt.*devel.*//' libvirt-dbus.spec + sed -i -e 's/BuildRequires: pkgconfig(libvirt.*).*//' libvirt-dbus.spec + rm -f '*.tar.gz' + /usr/bin/gmake dist /usr/bin/gmake dist-xz am__post_remove_distdir='@:' gmake[1]: Entering directory `<https://ci.centos.org/job/libvirt-dbus-master-rpm/systems=libvirt-centos-7/ws/build'> if test -d "libvirt-dbus-1.1.0"; then find "libvirt-dbus-1.1.0" -type d ! -perm -200 -exec chmod u+w {} ';' && rm -rf "libvirt-dbus-1.1.0" || { sleep 5 && rm -rf "libvirt-dbus-1.1.0"; }; else :; fi test -d "libvirt-dbus-1.1.0" || mkdir "libvirt-dbus-1.1.0" (cd data && /usr/bin/gmake top_distdir=../libvirt-dbus-1.1.0 distdir=../libvirt-dbus-1.1.0/data \ am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir) gmake[2]: Entering directory `<https://ci.centos.org/job/libvirt-dbus-master-rpm/systems=libvirt-centos-7/ws/build/data'> gmake[2]: Leaving directory `<https://ci.centos.org/job/libvirt-dbus-master-rpm/systems=libvirt-centos-7/ws/build/data'> (cd docs && /usr/bin/gmake top_distdir=../libvirt-dbus-1.1.0 distdir=../libvirt-dbus-1.1.0/docs \ am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir) gmake[2]: Entering directory `<https://ci.centos.org/job/libvirt-dbus-master-rpm/systems=libvirt-centos-7/ws/build/docs'> gmake[2]: Leaving directory `<https://ci.centos.org/job/libvirt-dbus-master-rpm/systems=libvirt-centos-7/ws/build/docs'> (cd src && /usr/bin/gmake top_distdir=../libvirt-dbus-1.1.0 distdir=../libvirt-dbus-1.1.0/src \ am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir) gmake[2]: Entering directory `<https://ci.centos.org/job/libvirt-dbus-master-rpm/systems=libvirt-centos-7/ws/build/src'> gmake[2]: Leaving directory `<https://ci.centos.org/job/libvirt-dbus-master-rpm/systems=libvirt-centos-7/ws/build/src'> (cd tests && /usr/bin/gmake top_distdir=../libvirt-dbus-1.1.0 distdir=../libvirt-dbus-1.1.0/tests \ am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir) gmake[2]: Entering directory `<https://ci.centos.org/job/libvirt-dbus-master-rpm/systems=libvirt-centos-7/ws/build/tests'> gmake[2]: Leaving directory `<https://ci.centos.org/job/libvirt-dbus-master-rpm/systems=libvirt-centos-7/ws/build/tests'> /usr/bin/gmake \ top_distdir="libvirt-dbus-1.1.0" distdir="libvirt-dbus-1.1.0" \ dist-hook gmake[2]: Entering directory `<https://ci.centos.org/job/libvirt-dbus-master-rpm/systems=libvirt-centos-7/ws/build'> GEN gen-AUTHORS gmake[2]: Leaving directory `<https://ci.centos.org/job/libvirt-dbus-master-rpm/systems=libvirt-centos-7/ws/build'> test -n "" \ || find "libvirt-dbus-1.1.0" -type d ! -perm -755 \ -exec chmod u+rwx,go+rx {} \; -o \ ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \ ! -type d ! -perm -400 -exec chmod a+r {} \; -o \ ! -type d ! -perm -444 -exec /bin/sh <https://ci.centos.org/job/libvirt-dbus-master-rpm/systems=libvirt-centos-7/ws/build-aux/install-sh> -c -m a+r {} {} \; \ || chmod -R a+r "libvirt-dbus-1.1.0" tardir=libvirt-dbus-1.1.0 && tar --format=posix -chf - "$tardir" | XZ_OPT=${XZ_OPT--e} xz -c >libvirt-dbus-1.1.0.tar.xz gmake[1]: Leaving directory `<https://ci.centos.org/job/libvirt-dbus-master-rpm/systems=libvirt-centos-7/ws/build'> if test -d "libvirt-dbus-1.1.0"; then find "libvirt-dbus-1.1.0" -type d ! -perm -200 -exec chmod u+w {} ';' && rm -rf "libvirt-dbus-1.1.0" || { sleep 5 && rm -rf "libvirt-dbus-1.1.0"; }; else :; fi ++ pwd + rpmbuild --define '_topdir <https://ci.centos.org/job/libvirt-dbus-master-rpm/systems=libvirt-centos-7/ws/build/rpmbuild'> -ta 'libvirt-dbus-*.tar.gz' error: File libvirt-dbus-*.tar.gz: No such file or directory /usr/bin/cat: libvirt-dbus-*.tar.gz: No such file or directory error: File libvirt-dbus-*.tar.gz: No such file or directory /usr/bin/cat: libvirt-dbus-*.tar.gz: No such file or directory error: Failed to read spec file from libvirt-dbus-*.tar.gz Build step 'Execute shell' marked build as failure
See <https://ci.centos.org/job/libvirt-dbus-master-rpm/systems=libvirt-centos-7/200/display/redirect> ------------------------------------------ Started by upstream project "libvirt-dbus-master-rpm" build number 200 originally caused by: Started by upstream project "libvirt-dbus-master-check" build number 219 originally caused by: Started by upstream project "libvirt-dbus-master-build" build number 253 originally caused by: Started by upstream project "libvirt-glib-master-build" build number 1224 originally caused by: Started by upstream project "libvirt-master-build" build number 1550 originally caused by: Started by an SCM change [EnvInject] - Loading node environment variables. Building remotely on libvirt-centos-7 (libvirt) in workspace <https://ci.centos.org/job/libvirt-dbus-master-rpm/systems=libvirt-centos-7/ws/> [libvirt-dbus-master] $ /bin/sh -xe /tmp/jenkins6711014959046199132.sh + cd build + sed -i -e 's/BuildRequires: osinfo-db.*//' libvirt-dbus.spec + sed -i -e 's/BuildRequires: libvirt.*devel.*//' libvirt-dbus.spec + sed -i -e 's/BuildRequires: pkgconfig(libvirt.*).*//' libvirt-dbus.spec + rm -f '*.tar.gz' + /usr/bin/gmake dist /usr/bin/gmake dist-xz am__post_remove_distdir='@:' gmake[1]: Entering directory `<https://ci.centos.org/job/libvirt-dbus-master-rpm/systems=libvirt-centos-7/ws/build'> if test -d "libvirt-dbus-1.1.0"; then find "libvirt-dbus-1.1.0" -type d ! -perm -200 -exec chmod u+w {} ';' && rm -rf "libvirt-dbus-1.1.0" || { sleep 5 && rm -rf "libvirt-dbus-1.1.0"; }; else :; fi test -d "libvirt-dbus-1.1.0" || mkdir "libvirt-dbus-1.1.0" (cd data && /usr/bin/gmake top_distdir=../libvirt-dbus-1.1.0 distdir=../libvirt-dbus-1.1.0/data \ am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir) gmake[2]: Entering directory `<https://ci.centos.org/job/libvirt-dbus-master-rpm/systems=libvirt-centos-7/ws/build/data'> gmake[2]: Leaving directory `<https://ci.centos.org/job/libvirt-dbus-master-rpm/systems=libvirt-centos-7/ws/build/data'> (cd docs && /usr/bin/gmake top_distdir=../libvirt-dbus-1.1.0 distdir=../libvirt-dbus-1.1.0/docs \ am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir) gmake[2]: Entering directory `<https://ci.centos.org/job/libvirt-dbus-master-rpm/systems=libvirt-centos-7/ws/build/docs'> gmake[2]: Leaving directory `<https://ci.centos.org/job/libvirt-dbus-master-rpm/systems=libvirt-centos-7/ws/build/docs'> (cd src && /usr/bin/gmake top_distdir=../libvirt-dbus-1.1.0 distdir=../libvirt-dbus-1.1.0/src \ am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir) gmake[2]: Entering directory `<https://ci.centos.org/job/libvirt-dbus-master-rpm/systems=libvirt-centos-7/ws/build/src'> gmake[2]: Leaving directory `<https://ci.centos.org/job/libvirt-dbus-master-rpm/systems=libvirt-centos-7/ws/build/src'> (cd tests && /usr/bin/gmake top_distdir=../libvirt-dbus-1.1.0 distdir=../libvirt-dbus-1.1.0/tests \ am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir) gmake[2]: Entering directory `<https://ci.centos.org/job/libvirt-dbus-master-rpm/systems=libvirt-centos-7/ws/build/tests'> gmake[2]: Leaving directory `<https://ci.centos.org/job/libvirt-dbus-master-rpm/systems=libvirt-centos-7/ws/build/tests'> /usr/bin/gmake \ top_distdir="libvirt-dbus-1.1.0" distdir="libvirt-dbus-1.1.0" \ dist-hook gmake[2]: Entering directory `<https://ci.centos.org/job/libvirt-dbus-master-rpm/systems=libvirt-centos-7/ws/build'> GEN gen-AUTHORS gmake[2]: Leaving directory `<https://ci.centos.org/job/libvirt-dbus-master-rpm/systems=libvirt-centos-7/ws/build'> test -n "" \ || find "libvirt-dbus-1.1.0" -type d ! -perm -755 \ -exec chmod u+rwx,go+rx {} \; -o \ ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \ ! -type d ! -perm -400 -exec chmod a+r {} \; -o \ ! -type d ! -perm -444 -exec /bin/sh <https://ci.centos.org/job/libvirt-dbus-master-rpm/systems=libvirt-centos-7/ws/build-aux/install-sh> -c -m a+r {} {} \; \ || chmod -R a+r "libvirt-dbus-1.1.0" tardir=libvirt-dbus-1.1.0 && tar --format=posix -chf - "$tardir" | XZ_OPT=${XZ_OPT--e} xz -c >libvirt-dbus-1.1.0.tar.xz gmake[1]: Leaving directory `<https://ci.centos.org/job/libvirt-dbus-master-rpm/systems=libvirt-centos-7/ws/build'> if test -d "libvirt-dbus-1.1.0"; then find "libvirt-dbus-1.1.0" -type d ! -perm -200 -exec chmod u+w {} ';' && rm -rf "libvirt-dbus-1.1.0" || { sleep 5 && rm -rf "libvirt-dbus-1.1.0"; }; else :; fi ++ pwd + rpmbuild --define '_topdir <https://ci.centos.org/job/libvirt-dbus-master-rpm/systems=libvirt-centos-7/ws/build/rpmbuild'> -ta 'libvirt-dbus-*.tar.gz' error: File libvirt-dbus-*.tar.gz: No such file or directory /usr/bin/cat: libvirt-dbus-*.tar.gz: No such file or directory error: File libvirt-dbus-*.tar.gz: No such file or directory /usr/bin/cat: libvirt-dbus-*.tar.gz: No such file or directory error: Failed to read spec file from libvirt-dbus-*.tar.gz Build step 'Execute shell' marked build as failure
See <https://ci.centos.org/job/libvirt-dbus-master-rpm/systems=libvirt-centos-7/201/display/redirect> ------------------------------------------ Started by upstream project "libvirt-dbus-master-rpm" build number 201 originally caused by: Started by upstream project "libvirt-dbus-master-check" build number 220 originally caused by: Started by upstream project "libvirt-dbus-master-build" build number 254 originally caused by: Started by upstream project "libvirt-glib-master-build" build number 1225 originally caused by: Started by upstream project "libvirt-master-build" build number 1551 originally caused by: Started by an SCM change [EnvInject] - Loading node environment variables. Building remotely on libvirt-centos-7 (libvirt) in workspace <https://ci.centos.org/job/libvirt-dbus-master-rpm/systems=libvirt-centos-7/ws/> [libvirt-dbus-master] $ /bin/sh -xe /tmp/jenkins1326602451419604993.sh + cd build + sed -i -e 's/BuildRequires: osinfo-db.*//' libvirt-dbus.spec + sed -i -e 's/BuildRequires: libvirt.*devel.*//' libvirt-dbus.spec + sed -i -e 's/BuildRequires: pkgconfig(libvirt.*).*//' libvirt-dbus.spec + rm -f '*.tar.gz' + /usr/bin/gmake dist /usr/bin/gmake dist-xz am__post_remove_distdir='@:' gmake[1]: Entering directory `<https://ci.centos.org/job/libvirt-dbus-master-rpm/systems=libvirt-centos-7/ws/build'> if test -d "libvirt-dbus-1.1.0"; then find "libvirt-dbus-1.1.0" -type d ! -perm -200 -exec chmod u+w {} ';' && rm -rf "libvirt-dbus-1.1.0" || { sleep 5 && rm -rf "libvirt-dbus-1.1.0"; }; else :; fi test -d "libvirt-dbus-1.1.0" || mkdir "libvirt-dbus-1.1.0" (cd data && /usr/bin/gmake top_distdir=../libvirt-dbus-1.1.0 distdir=../libvirt-dbus-1.1.0/data \ am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir) gmake[2]: Entering directory `<https://ci.centos.org/job/libvirt-dbus-master-rpm/systems=libvirt-centos-7/ws/build/data'> gmake[2]: Leaving directory `<https://ci.centos.org/job/libvirt-dbus-master-rpm/systems=libvirt-centos-7/ws/build/data'> (cd docs && /usr/bin/gmake top_distdir=../libvirt-dbus-1.1.0 distdir=../libvirt-dbus-1.1.0/docs \ am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir) gmake[2]: Entering directory `<https://ci.centos.org/job/libvirt-dbus-master-rpm/systems=libvirt-centos-7/ws/build/docs'> gmake[2]: Leaving directory `<https://ci.centos.org/job/libvirt-dbus-master-rpm/systems=libvirt-centos-7/ws/build/docs'> (cd src && /usr/bin/gmake top_distdir=../libvirt-dbus-1.1.0 distdir=../libvirt-dbus-1.1.0/src \ am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir) gmake[2]: Entering directory `<https://ci.centos.org/job/libvirt-dbus-master-rpm/systems=libvirt-centos-7/ws/build/src'> gmake[2]: Leaving directory `<https://ci.centos.org/job/libvirt-dbus-master-rpm/systems=libvirt-centos-7/ws/build/src'> (cd tests && /usr/bin/gmake top_distdir=../libvirt-dbus-1.1.0 distdir=../libvirt-dbus-1.1.0/tests \ am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir) gmake[2]: Entering directory `<https://ci.centos.org/job/libvirt-dbus-master-rpm/systems=libvirt-centos-7/ws/build/tests'> gmake[2]: Leaving directory `<https://ci.centos.org/job/libvirt-dbus-master-rpm/systems=libvirt-centos-7/ws/build/tests'> /usr/bin/gmake \ top_distdir="libvirt-dbus-1.1.0" distdir="libvirt-dbus-1.1.0" \ dist-hook gmake[2]: Entering directory `<https://ci.centos.org/job/libvirt-dbus-master-rpm/systems=libvirt-centos-7/ws/build'> GEN gen-AUTHORS gmake[2]: Leaving directory `<https://ci.centos.org/job/libvirt-dbus-master-rpm/systems=libvirt-centos-7/ws/build'> test -n "" \ || find "libvirt-dbus-1.1.0" -type d ! -perm -755 \ -exec chmod u+rwx,go+rx {} \; -o \ ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \ ! -type d ! -perm -400 -exec chmod a+r {} \; -o \ ! -type d ! -perm -444 -exec /bin/sh <https://ci.centos.org/job/libvirt-dbus-master-rpm/systems=libvirt-centos-7/ws/build-aux/install-sh> -c -m a+r {} {} \; \ || chmod -R a+r "libvirt-dbus-1.1.0" tardir=libvirt-dbus-1.1.0 && tar --format=posix -chf - "$tardir" | XZ_OPT=${XZ_OPT--e} xz -c >libvirt-dbus-1.1.0.tar.xz gmake[1]: Leaving directory `<https://ci.centos.org/job/libvirt-dbus-master-rpm/systems=libvirt-centos-7/ws/build'> if test -d "libvirt-dbus-1.1.0"; then find "libvirt-dbus-1.1.0" -type d ! -perm -200 -exec chmod u+w {} ';' && rm -rf "libvirt-dbus-1.1.0" || { sleep 5 && rm -rf "libvirt-dbus-1.1.0"; }; else :; fi ++ pwd + rpmbuild --define '_topdir <https://ci.centos.org/job/libvirt-dbus-master-rpm/systems=libvirt-centos-7/ws/build/rpmbuild'> -ta 'libvirt-dbus-*.tar.gz' error: File libvirt-dbus-*.tar.gz: No such file or directory /usr/bin/cat: libvirt-dbus-*.tar.gz: No such file or directory error: File libvirt-dbus-*.tar.gz: No such file or directory /usr/bin/cat: libvirt-dbus-*.tar.gz: No such file or directory error: Failed to read spec file from libvirt-dbus-*.tar.gz Build step 'Execute shell' marked build as failure
See <https://ci.centos.org/job/libvirt-dbus-master-rpm/systems=libvirt-centos-7/202/display/redirect> ------------------------------------------ Started by upstream project "libvirt-dbus-master-rpm" build number 202 originally caused by: Started by upstream project "libvirt-dbus-master-check" build number 221 originally caused by: Started by upstream project "libvirt-dbus-master-build" build number 255 originally caused by: Started by upstream project "libvirt-glib-master-build" build number 1226 originally caused by: Started by upstream project "libvirt-master-build" build number 1552 originally caused by: Started by an SCM change [EnvInject] - Loading node environment variables. Building remotely on libvirt-centos-7 (libvirt) in workspace <https://ci.centos.org/job/libvirt-dbus-master-rpm/systems=libvirt-centos-7/ws/> [libvirt-dbus-master] $ /bin/sh -xe /tmp/jenkins4516564532868087828.sh + cd build + sed -i -e 's/BuildRequires: osinfo-db.*//' libvirt-dbus.spec + sed -i -e 's/BuildRequires: libvirt.*devel.*//' libvirt-dbus.spec + sed -i -e 's/BuildRequires: pkgconfig(libvirt.*).*//' libvirt-dbus.spec + rm -f '*.tar.gz' + /usr/bin/gmake dist /usr/bin/gmake dist-xz am__post_remove_distdir='@:' gmake[1]: Entering directory `<https://ci.centos.org/job/libvirt-dbus-master-rpm/systems=libvirt-centos-7/ws/build'> if test -d "libvirt-dbus-1.1.0"; then find "libvirt-dbus-1.1.0" -type d ! -perm -200 -exec chmod u+w {} ';' && rm -rf "libvirt-dbus-1.1.0" || { sleep 5 && rm -rf "libvirt-dbus-1.1.0"; }; else :; fi test -d "libvirt-dbus-1.1.0" || mkdir "libvirt-dbus-1.1.0" (cd data && /usr/bin/gmake top_distdir=../libvirt-dbus-1.1.0 distdir=../libvirt-dbus-1.1.0/data \ am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir) gmake[2]: Entering directory `<https://ci.centos.org/job/libvirt-dbus-master-rpm/systems=libvirt-centos-7/ws/build/data'> gmake[2]: Leaving directory `<https://ci.centos.org/job/libvirt-dbus-master-rpm/systems=libvirt-centos-7/ws/build/data'> (cd docs && /usr/bin/gmake top_distdir=../libvirt-dbus-1.1.0 distdir=../libvirt-dbus-1.1.0/docs \ am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir) gmake[2]: Entering directory `<https://ci.centos.org/job/libvirt-dbus-master-rpm/systems=libvirt-centos-7/ws/build/docs'> gmake[2]: Leaving directory `<https://ci.centos.org/job/libvirt-dbus-master-rpm/systems=libvirt-centos-7/ws/build/docs'> (cd src && /usr/bin/gmake top_distdir=../libvirt-dbus-1.1.0 distdir=../libvirt-dbus-1.1.0/src \ am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir) gmake[2]: Entering directory `<https://ci.centos.org/job/libvirt-dbus-master-rpm/systems=libvirt-centos-7/ws/build/src'> gmake[2]: Leaving directory `<https://ci.centos.org/job/libvirt-dbus-master-rpm/systems=libvirt-centos-7/ws/build/src'> (cd tests && /usr/bin/gmake top_distdir=../libvirt-dbus-1.1.0 distdir=../libvirt-dbus-1.1.0/tests \ am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir) gmake[2]: Entering directory `<https://ci.centos.org/job/libvirt-dbus-master-rpm/systems=libvirt-centos-7/ws/build/tests'> gmake[2]: Leaving directory `<https://ci.centos.org/job/libvirt-dbus-master-rpm/systems=libvirt-centos-7/ws/build/tests'> /usr/bin/gmake \ top_distdir="libvirt-dbus-1.1.0" distdir="libvirt-dbus-1.1.0" \ dist-hook gmake[2]: Entering directory `<https://ci.centos.org/job/libvirt-dbus-master-rpm/systems=libvirt-centos-7/ws/build'> GEN gen-AUTHORS gmake[2]: Leaving directory `<https://ci.centos.org/job/libvirt-dbus-master-rpm/systems=libvirt-centos-7/ws/build'> test -n "" \ || find "libvirt-dbus-1.1.0" -type d ! -perm -755 \ -exec chmod u+rwx,go+rx {} \; -o \ ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \ ! -type d ! -perm -400 -exec chmod a+r {} \; -o \ ! -type d ! -perm -444 -exec /bin/sh <https://ci.centos.org/job/libvirt-dbus-master-rpm/systems=libvirt-centos-7/ws/build-aux/install-sh> -c -m a+r {} {} \; \ || chmod -R a+r "libvirt-dbus-1.1.0" tardir=libvirt-dbus-1.1.0 && tar --format=posix -chf - "$tardir" | XZ_OPT=${XZ_OPT--e} xz -c >libvirt-dbus-1.1.0.tar.xz gmake[1]: Leaving directory `<https://ci.centos.org/job/libvirt-dbus-master-rpm/systems=libvirt-centos-7/ws/build'> if test -d "libvirt-dbus-1.1.0"; then find "libvirt-dbus-1.1.0" -type d ! -perm -200 -exec chmod u+w {} ';' && rm -rf "libvirt-dbus-1.1.0" || { sleep 5 && rm -rf "libvirt-dbus-1.1.0"; }; else :; fi ++ pwd + rpmbuild --define '_topdir <https://ci.centos.org/job/libvirt-dbus-master-rpm/systems=libvirt-centos-7/ws/build/rpmbuild'> -ta 'libvirt-dbus-*.tar.gz' error: File libvirt-dbus-*.tar.gz: No such file or directory /usr/bin/cat: libvirt-dbus-*.tar.gz: No such file or directory error: File libvirt-dbus-*.tar.gz: No such file or directory /usr/bin/cat: libvirt-dbus-*.tar.gz: No such file or directory error: Failed to read spec file from libvirt-dbus-*.tar.gz Build step 'Execute shell' marked build as failure
See <https://ci.centos.org/job/libvirt-dbus-master-rpm/systems=libvirt-centos-7/203/display/redirect> ------------------------------------------ Started by upstream project "libvirt-dbus-master-rpm" build number 203 originally caused by: Started by upstream project "libvirt-dbus-master-check" build number 222 originally caused by: Started by upstream project "libvirt-dbus-master-build" build number 256 originally caused by: Started by upstream project "libvirt-glib-master-build" build number 1227 originally caused by: Started by upstream project "libvirt-master-build" build number 1553 originally caused by: Started by an SCM change Started by an SCM change Started by an SCM change Started by an SCM change Started by an SCM change [EnvInject] - Loading node environment variables. Building remotely on libvirt-centos-7 (libvirt) in workspace <https://ci.centos.org/job/libvirt-dbus-master-rpm/systems=libvirt-centos-7/ws/> [libvirt-dbus-master] $ /bin/sh -xe /tmp/jenkins2097177972970018546.sh + cd build + sed -i -e 's/BuildRequires: osinfo-db.*//' libvirt-dbus.spec + sed -i -e 's/BuildRequires: libvirt.*devel.*//' libvirt-dbus.spec + sed -i -e 's/BuildRequires: pkgconfig(libvirt.*).*//' libvirt-dbus.spec + rm -f '*.tar.gz' + /usr/bin/gmake dist /usr/bin/gmake dist-xz am__post_remove_distdir='@:' gmake[1]: Entering directory `<https://ci.centos.org/job/libvirt-dbus-master-rpm/systems=libvirt-centos-7/ws/build'> if test -d "libvirt-dbus-1.1.0"; then find "libvirt-dbus-1.1.0" -type d ! -perm -200 -exec chmod u+w {} ';' && rm -rf "libvirt-dbus-1.1.0" || { sleep 5 && rm -rf "libvirt-dbus-1.1.0"; }; else :; fi test -d "libvirt-dbus-1.1.0" || mkdir "libvirt-dbus-1.1.0" (cd data && /usr/bin/gmake top_distdir=../libvirt-dbus-1.1.0 distdir=../libvirt-dbus-1.1.0/data \ am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir) gmake[2]: Entering directory `<https://ci.centos.org/job/libvirt-dbus-master-rpm/systems=libvirt-centos-7/ws/build/data'> gmake[2]: Leaving directory `<https://ci.centos.org/job/libvirt-dbus-master-rpm/systems=libvirt-centos-7/ws/build/data'> (cd docs && /usr/bin/gmake top_distdir=../libvirt-dbus-1.1.0 distdir=../libvirt-dbus-1.1.0/docs \ am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir) gmake[2]: Entering directory `<https://ci.centos.org/job/libvirt-dbus-master-rpm/systems=libvirt-centos-7/ws/build/docs'> gmake[2]: Leaving directory `<https://ci.centos.org/job/libvirt-dbus-master-rpm/systems=libvirt-centos-7/ws/build/docs'> (cd src && /usr/bin/gmake top_distdir=../libvirt-dbus-1.1.0 distdir=../libvirt-dbus-1.1.0/src \ am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir) gmake[2]: Entering directory `<https://ci.centos.org/job/libvirt-dbus-master-rpm/systems=libvirt-centos-7/ws/build/src'> gmake[2]: Leaving directory `<https://ci.centos.org/job/libvirt-dbus-master-rpm/systems=libvirt-centos-7/ws/build/src'> (cd tests && /usr/bin/gmake top_distdir=../libvirt-dbus-1.1.0 distdir=../libvirt-dbus-1.1.0/tests \ am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir) gmake[2]: Entering directory `<https://ci.centos.org/job/libvirt-dbus-master-rpm/systems=libvirt-centos-7/ws/build/tests'> gmake[2]: Leaving directory `<https://ci.centos.org/job/libvirt-dbus-master-rpm/systems=libvirt-centos-7/ws/build/tests'> /usr/bin/gmake \ top_distdir="libvirt-dbus-1.1.0" distdir="libvirt-dbus-1.1.0" \ dist-hook gmake[2]: Entering directory `<https://ci.centos.org/job/libvirt-dbus-master-rpm/systems=libvirt-centos-7/ws/build'> GEN gen-AUTHORS gmake[2]: Leaving directory `<https://ci.centos.org/job/libvirt-dbus-master-rpm/systems=libvirt-centos-7/ws/build'> test -n "" \ || find "libvirt-dbus-1.1.0" -type d ! -perm -755 \ -exec chmod u+rwx,go+rx {} \; -o \ ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \ ! -type d ! -perm -400 -exec chmod a+r {} \; -o \ ! -type d ! -perm -444 -exec /bin/sh <https://ci.centos.org/job/libvirt-dbus-master-rpm/systems=libvirt-centos-7/ws/build-aux/install-sh> -c -m a+r {} {} \; \ || chmod -R a+r "libvirt-dbus-1.1.0" tardir=libvirt-dbus-1.1.0 && tar --format=posix -chf - "$tardir" | XZ_OPT=${XZ_OPT--e} xz -c >libvirt-dbus-1.1.0.tar.xz gmake[1]: Leaving directory `<https://ci.centos.org/job/libvirt-dbus-master-rpm/systems=libvirt-centos-7/ws/build'> if test -d "libvirt-dbus-1.1.0"; then find "libvirt-dbus-1.1.0" -type d ! -perm -200 -exec chmod u+w {} ';' && rm -rf "libvirt-dbus-1.1.0" || { sleep 5 && rm -rf "libvirt-dbus-1.1.0"; }; else :; fi ++ pwd + rpmbuild --define '_topdir <https://ci.centos.org/job/libvirt-dbus-master-rpm/systems=libvirt-centos-7/ws/build/rpmbuild'> -ta 'libvirt-dbus-*.tar.gz' error: File libvirt-dbus-*.tar.gz: No such file or directory /usr/bin/cat: libvirt-dbus-*.tar.gz: No such file or directory error: File libvirt-dbus-*.tar.gz: No such file or directory /usr/bin/cat: libvirt-dbus-*.tar.gz: No such file or directory error: Failed to read spec file from libvirt-dbus-*.tar.gz Build step 'Execute shell' marked build as failure
See <https://ci.centos.org/job/libvirt-dbus-master-rpm/systems=libvirt-centos-7/204/display/redirect> ------------------------------------------ Started by upstream project "libvirt-dbus-master-rpm" build number 204 originally caused by: Started by upstream project "libvirt-dbus-master-check" build number 223 originally caused by: Started by upstream project "libvirt-dbus-master-build" build number 257 originally caused by: Started by upstream project "libvirt-glib-master-build" build number 1228 originally caused by: Started by upstream project "libvirt-master-build" build number 1554 originally caused by: Started by an SCM change [EnvInject] - Loading node environment variables. Building remotely on libvirt-centos-7 (libvirt) in workspace <https://ci.centos.org/job/libvirt-dbus-master-rpm/systems=libvirt-centos-7/ws/> [libvirt-dbus-master] $ /bin/sh -xe /tmp/jenkins6569736502425126837.sh + cd build + sed -i -e 's/BuildRequires: osinfo-db.*//' libvirt-dbus.spec + sed -i -e 's/BuildRequires: libvirt.*devel.*//' libvirt-dbus.spec + sed -i -e 's/BuildRequires: pkgconfig(libvirt.*).*//' libvirt-dbus.spec + rm -f '*.tar.gz' + /usr/bin/gmake dist /usr/bin/gmake dist-xz am__post_remove_distdir='@:' gmake[1]: Entering directory `<https://ci.centos.org/job/libvirt-dbus-master-rpm/systems=libvirt-centos-7/ws/build'> if test -d "libvirt-dbus-1.1.0"; then find "libvirt-dbus-1.1.0" -type d ! -perm -200 -exec chmod u+w {} ';' && rm -rf "libvirt-dbus-1.1.0" || { sleep 5 && rm -rf "libvirt-dbus-1.1.0"; }; else :; fi test -d "libvirt-dbus-1.1.0" || mkdir "libvirt-dbus-1.1.0" (cd data && /usr/bin/gmake top_distdir=../libvirt-dbus-1.1.0 distdir=../libvirt-dbus-1.1.0/data \ am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir) gmake[2]: Entering directory `<https://ci.centos.org/job/libvirt-dbus-master-rpm/systems=libvirt-centos-7/ws/build/data'> gmake[2]: Leaving directory `<https://ci.centos.org/job/libvirt-dbus-master-rpm/systems=libvirt-centos-7/ws/build/data'> (cd docs && /usr/bin/gmake top_distdir=../libvirt-dbus-1.1.0 distdir=../libvirt-dbus-1.1.0/docs \ am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir) gmake[2]: Entering directory `<https://ci.centos.org/job/libvirt-dbus-master-rpm/systems=libvirt-centos-7/ws/build/docs'> gmake[2]: Leaving directory `<https://ci.centos.org/job/libvirt-dbus-master-rpm/systems=libvirt-centos-7/ws/build/docs'> (cd src && /usr/bin/gmake top_distdir=../libvirt-dbus-1.1.0 distdir=../libvirt-dbus-1.1.0/src \ am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir) gmake[2]: Entering directory `<https://ci.centos.org/job/libvirt-dbus-master-rpm/systems=libvirt-centos-7/ws/build/src'> gmake[2]: Leaving directory `<https://ci.centos.org/job/libvirt-dbus-master-rpm/systems=libvirt-centos-7/ws/build/src'> (cd tests && /usr/bin/gmake top_distdir=../libvirt-dbus-1.1.0 distdir=../libvirt-dbus-1.1.0/tests \ am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir) gmake[2]: Entering directory `<https://ci.centos.org/job/libvirt-dbus-master-rpm/systems=libvirt-centos-7/ws/build/tests'> gmake[2]: Leaving directory `<https://ci.centos.org/job/libvirt-dbus-master-rpm/systems=libvirt-centos-7/ws/build/tests'> /usr/bin/gmake \ top_distdir="libvirt-dbus-1.1.0" distdir="libvirt-dbus-1.1.0" \ dist-hook gmake[2]: Entering directory `<https://ci.centos.org/job/libvirt-dbus-master-rpm/systems=libvirt-centos-7/ws/build'> GEN gen-AUTHORS gmake[2]: Leaving directory `<https://ci.centos.org/job/libvirt-dbus-master-rpm/systems=libvirt-centos-7/ws/build'> test -n "" \ || find "libvirt-dbus-1.1.0" -type d ! -perm -755 \ -exec chmod u+rwx,go+rx {} \; -o \ ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \ ! -type d ! -perm -400 -exec chmod a+r {} \; -o \ ! -type d ! -perm -444 -exec /bin/sh <https://ci.centos.org/job/libvirt-dbus-master-rpm/systems=libvirt-centos-7/ws/build-aux/install-sh> -c -m a+r {} {} \; \ || chmod -R a+r "libvirt-dbus-1.1.0" tardir=libvirt-dbus-1.1.0 && tar --format=posix -chf - "$tardir" | XZ_OPT=${XZ_OPT--e} xz -c >libvirt-dbus-1.1.0.tar.xz gmake[1]: Leaving directory `<https://ci.centos.org/job/libvirt-dbus-master-rpm/systems=libvirt-centos-7/ws/build'> if test -d "libvirt-dbus-1.1.0"; then find "libvirt-dbus-1.1.0" -type d ! -perm -200 -exec chmod u+w {} ';' && rm -rf "libvirt-dbus-1.1.0" || { sleep 5 && rm -rf "libvirt-dbus-1.1.0"; }; else :; fi ++ pwd + rpmbuild --define '_topdir <https://ci.centos.org/job/libvirt-dbus-master-rpm/systems=libvirt-centos-7/ws/build/rpmbuild'> -ta 'libvirt-dbus-*.tar.gz' error: File libvirt-dbus-*.tar.gz: No such file or directory /usr/bin/cat: libvirt-dbus-*.tar.gz: No such file or directory error: File libvirt-dbus-*.tar.gz: No such file or directory /usr/bin/cat: libvirt-dbus-*.tar.gz: No such file or directory error: Failed to read spec file from libvirt-dbus-*.tar.gz Build step 'Execute shell' marked build as failure
See <https://ci.centos.org/job/libvirt-dbus-master-rpm/systems=libvirt-centos-7/205/display/redirect> ------------------------------------------ Started by upstream project "libvirt-dbus-master-rpm" build number 205 originally caused by: Started by upstream project "libvirt-dbus-master-check" build number 224 originally caused by: Started by upstream project "libvirt-dbus-master-build" build number 258 originally caused by: Started by upstream project "libvirt-glib-master-build" build number 1229 originally caused by: Started by upstream project "libvirt-master-build" build number 1555 originally caused by: Started by an SCM change [EnvInject] - Loading node environment variables. Building remotely on libvirt-centos-7 (libvirt) in workspace <https://ci.centos.org/job/libvirt-dbus-master-rpm/systems=libvirt-centos-7/ws/> [libvirt-dbus-master] $ /bin/sh -xe /tmp/jenkins1556110626562157280.sh + cd build + sed -i -e 's/BuildRequires: osinfo-db.*//' libvirt-dbus.spec + sed -i -e 's/BuildRequires: libvirt.*devel.*//' libvirt-dbus.spec + sed -i -e 's/BuildRequires: pkgconfig(libvirt.*).*//' libvirt-dbus.spec + rm -f '*.tar.gz' + /usr/bin/gmake dist /usr/bin/gmake dist-xz am__post_remove_distdir='@:' gmake[1]: Entering directory `<https://ci.centos.org/job/libvirt-dbus-master-rpm/systems=libvirt-centos-7/ws/build'> if test -d "libvirt-dbus-1.1.0"; then find "libvirt-dbus-1.1.0" -type d ! -perm -200 -exec chmod u+w {} ';' && rm -rf "libvirt-dbus-1.1.0" || { sleep 5 && rm -rf "libvirt-dbus-1.1.0"; }; else :; fi test -d "libvirt-dbus-1.1.0" || mkdir "libvirt-dbus-1.1.0" (cd data && /usr/bin/gmake top_distdir=../libvirt-dbus-1.1.0 distdir=../libvirt-dbus-1.1.0/data \ am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir) gmake[2]: Entering directory `<https://ci.centos.org/job/libvirt-dbus-master-rpm/systems=libvirt-centos-7/ws/build/data'> gmake[2]: Leaving directory `<https://ci.centos.org/job/libvirt-dbus-master-rpm/systems=libvirt-centos-7/ws/build/data'> (cd docs && /usr/bin/gmake top_distdir=../libvirt-dbus-1.1.0 distdir=../libvirt-dbus-1.1.0/docs \ am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir) gmake[2]: Entering directory `<https://ci.centos.org/job/libvirt-dbus-master-rpm/systems=libvirt-centos-7/ws/build/docs'> gmake[2]: Leaving directory `<https://ci.centos.org/job/libvirt-dbus-master-rpm/systems=libvirt-centos-7/ws/build/docs'> (cd src && /usr/bin/gmake top_distdir=../libvirt-dbus-1.1.0 distdir=../libvirt-dbus-1.1.0/src \ am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir) gmake[2]: Entering directory `<https://ci.centos.org/job/libvirt-dbus-master-rpm/systems=libvirt-centos-7/ws/build/src'> gmake[2]: Leaving directory `<https://ci.centos.org/job/libvirt-dbus-master-rpm/systems=libvirt-centos-7/ws/build/src'> (cd tests && /usr/bin/gmake top_distdir=../libvirt-dbus-1.1.0 distdir=../libvirt-dbus-1.1.0/tests \ am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir) gmake[2]: Entering directory `<https://ci.centos.org/job/libvirt-dbus-master-rpm/systems=libvirt-centos-7/ws/build/tests'> gmake[2]: Leaving directory `<https://ci.centos.org/job/libvirt-dbus-master-rpm/systems=libvirt-centos-7/ws/build/tests'> /usr/bin/gmake \ top_distdir="libvirt-dbus-1.1.0" distdir="libvirt-dbus-1.1.0" \ dist-hook gmake[2]: Entering directory `<https://ci.centos.org/job/libvirt-dbus-master-rpm/systems=libvirt-centos-7/ws/build'> GEN gen-AUTHORS gmake[2]: Leaving directory `<https://ci.centos.org/job/libvirt-dbus-master-rpm/systems=libvirt-centos-7/ws/build'> test -n "" \ || find "libvirt-dbus-1.1.0" -type d ! -perm -755 \ -exec chmod u+rwx,go+rx {} \; -o \ ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \ ! -type d ! -perm -400 -exec chmod a+r {} \; -o \ ! -type d ! -perm -444 -exec /bin/sh <https://ci.centos.org/job/libvirt-dbus-master-rpm/systems=libvirt-centos-7/ws/build-aux/install-sh> -c -m a+r {} {} \; \ || chmod -R a+r "libvirt-dbus-1.1.0" tardir=libvirt-dbus-1.1.0 && tar --format=posix -chf - "$tardir" | XZ_OPT=${XZ_OPT--e} xz -c >libvirt-dbus-1.1.0.tar.xz gmake[1]: Leaving directory `<https://ci.centos.org/job/libvirt-dbus-master-rpm/systems=libvirt-centos-7/ws/build'> if test -d "libvirt-dbus-1.1.0"; then find "libvirt-dbus-1.1.0" -type d ! -perm -200 -exec chmod u+w {} ';' && rm -rf "libvirt-dbus-1.1.0" || { sleep 5 && rm -rf "libvirt-dbus-1.1.0"; }; else :; fi ++ pwd + rpmbuild --define '_topdir <https://ci.centos.org/job/libvirt-dbus-master-rpm/systems=libvirt-centos-7/ws/build/rpmbuild'> -ta 'libvirt-dbus-*.tar.gz' error: File libvirt-dbus-*.tar.gz: No such file or directory /usr/bin/cat: libvirt-dbus-*.tar.gz: No such file or directory error: File libvirt-dbus-*.tar.gz: No such file or directory /usr/bin/cat: libvirt-dbus-*.tar.gz: No such file or directory error: Failed to read spec file from libvirt-dbus-*.tar.gz Build step 'Execute shell' marked build as failure
See <https://ci.centos.org/job/libvirt-dbus-master-rpm/systems=libvirt-centos-7/206/display/redirect> ------------------------------------------ Started by upstream project "libvirt-dbus-master-rpm" build number 206 originally caused by: Started by upstream project "libvirt-dbus-master-check" build number 225 originally caused by: Started by upstream project "libvirt-dbus-master-build" build number 259 originally caused by: Started by upstream project "libvirt-glib-master-build" build number 1230 originally caused by: Started by upstream project "libvirt-master-build" build number 1556 originally caused by: Started by an SCM change Started by an SCM change [EnvInject] - Loading node environment variables. Building remotely on libvirt-centos-7 (libvirt) in workspace <https://ci.centos.org/job/libvirt-dbus-master-rpm/systems=libvirt-centos-7/ws/> [libvirt-dbus-master] $ /bin/sh -xe /tmp/jenkins2450849458852162691.sh + cd build + sed -i -e 's/BuildRequires: osinfo-db.*//' libvirt-dbus.spec + sed -i -e 's/BuildRequires: libvirt.*devel.*//' libvirt-dbus.spec + sed -i -e 's/BuildRequires: pkgconfig(libvirt.*).*//' libvirt-dbus.spec + rm -f '*.tar.gz' + /usr/bin/gmake dist /usr/bin/gmake dist-xz am__post_remove_distdir='@:' gmake[1]: Entering directory `<https://ci.centos.org/job/libvirt-dbus-master-rpm/systems=libvirt-centos-7/ws/build'> if test -d "libvirt-dbus-1.1.0"; then find "libvirt-dbus-1.1.0" -type d ! -perm -200 -exec chmod u+w {} ';' && rm -rf "libvirt-dbus-1.1.0" || { sleep 5 && rm -rf "libvirt-dbus-1.1.0"; }; else :; fi test -d "libvirt-dbus-1.1.0" || mkdir "libvirt-dbus-1.1.0" (cd data && /usr/bin/gmake top_distdir=../libvirt-dbus-1.1.0 distdir=../libvirt-dbus-1.1.0/data \ am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir) gmake[2]: Entering directory `<https://ci.centos.org/job/libvirt-dbus-master-rpm/systems=libvirt-centos-7/ws/build/data'> gmake[2]: Leaving directory `<https://ci.centos.org/job/libvirt-dbus-master-rpm/systems=libvirt-centos-7/ws/build/data'> (cd docs && /usr/bin/gmake top_distdir=../libvirt-dbus-1.1.0 distdir=../libvirt-dbus-1.1.0/docs \ am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir) gmake[2]: Entering directory `<https://ci.centos.org/job/libvirt-dbus-master-rpm/systems=libvirt-centos-7/ws/build/docs'> gmake[2]: Leaving directory `<https://ci.centos.org/job/libvirt-dbus-master-rpm/systems=libvirt-centos-7/ws/build/docs'> (cd src && /usr/bin/gmake top_distdir=../libvirt-dbus-1.1.0 distdir=../libvirt-dbus-1.1.0/src \ am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir) gmake[2]: Entering directory `<https://ci.centos.org/job/libvirt-dbus-master-rpm/systems=libvirt-centos-7/ws/build/src'> gmake[2]: Leaving directory `<https://ci.centos.org/job/libvirt-dbus-master-rpm/systems=libvirt-centos-7/ws/build/src'> (cd tests && /usr/bin/gmake top_distdir=../libvirt-dbus-1.1.0 distdir=../libvirt-dbus-1.1.0/tests \ am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir) gmake[2]: Entering directory `<https://ci.centos.org/job/libvirt-dbus-master-rpm/systems=libvirt-centos-7/ws/build/tests'> gmake[2]: Leaving directory `<https://ci.centos.org/job/libvirt-dbus-master-rpm/systems=libvirt-centos-7/ws/build/tests'> /usr/bin/gmake \ top_distdir="libvirt-dbus-1.1.0" distdir="libvirt-dbus-1.1.0" \ dist-hook gmake[2]: Entering directory `<https://ci.centos.org/job/libvirt-dbus-master-rpm/systems=libvirt-centos-7/ws/build'> GEN gen-AUTHORS gmake[2]: Leaving directory `<https://ci.centos.org/job/libvirt-dbus-master-rpm/systems=libvirt-centos-7/ws/build'> test -n "" \ || find "libvirt-dbus-1.1.0" -type d ! -perm -755 \ -exec chmod u+rwx,go+rx {} \; -o \ ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \ ! -type d ! -perm -400 -exec chmod a+r {} \; -o \ ! -type d ! -perm -444 -exec /bin/sh <https://ci.centos.org/job/libvirt-dbus-master-rpm/systems=libvirt-centos-7/ws/build-aux/install-sh> -c -m a+r {} {} \; \ || chmod -R a+r "libvirt-dbus-1.1.0" tardir=libvirt-dbus-1.1.0 && tar --format=posix -chf - "$tardir" | XZ_OPT=${XZ_OPT--e} xz -c >libvirt-dbus-1.1.0.tar.xz gmake[1]: Leaving directory `<https://ci.centos.org/job/libvirt-dbus-master-rpm/systems=libvirt-centos-7/ws/build'> if test -d "libvirt-dbus-1.1.0"; then find "libvirt-dbus-1.1.0" -type d ! -perm -200 -exec chmod u+w {} ';' && rm -rf "libvirt-dbus-1.1.0" || { sleep 5 && rm -rf "libvirt-dbus-1.1.0"; }; else :; fi ++ pwd + rpmbuild --define '_topdir <https://ci.centos.org/job/libvirt-dbus-master-rpm/systems=libvirt-centos-7/ws/build/rpmbuild'> -ta 'libvirt-dbus-*.tar.gz' error: File libvirt-dbus-*.tar.gz: No such file or directory /usr/bin/cat: libvirt-dbus-*.tar.gz: No such file or directory error: File libvirt-dbus-*.tar.gz: No such file or directory /usr/bin/cat: libvirt-dbus-*.tar.gz: No such file or directory error: Failed to read spec file from libvirt-dbus-*.tar.gz Build step 'Execute shell' marked build as failure
See <https://ci.centos.org/job/libvirt-dbus-master-rpm/systems=libvirt-centos-7/207/display/redirect> ------------------------------------------ Started by upstream project "libvirt-dbus-master-rpm" build number 207 originally caused by: Started by upstream project "libvirt-dbus-master-check" build number 226 originally caused by: Started by upstream project "libvirt-dbus-master-build" build number 260 originally caused by: Started by upstream project "libvirt-glib-master-build" build number 1231 originally caused by: Started by upstream project "libvirt-master-build" build number 1557 originally caused by: Started by an SCM change [EnvInject] - Loading node environment variables. Building remotely on libvirt-centos-7 (libvirt) in workspace <https://ci.centos.org/job/libvirt-dbus-master-rpm/systems=libvirt-centos-7/ws/> [libvirt-dbus-master] $ /bin/sh -xe /tmp/jenkins6621396881450531364.sh + cd build + sed -i -e 's/BuildRequires: osinfo-db.*//' libvirt-dbus.spec + sed -i -e 's/BuildRequires: libvirt.*devel.*//' libvirt-dbus.spec + sed -i -e 's/BuildRequires: pkgconfig(libvirt.*).*//' libvirt-dbus.spec + rm -f '*.tar.gz' + /usr/bin/gmake dist /usr/bin/gmake dist-xz am__post_remove_distdir='@:' gmake[1]: Entering directory `<https://ci.centos.org/job/libvirt-dbus-master-rpm/systems=libvirt-centos-7/ws/build'> if test -d "libvirt-dbus-1.1.0"; then find "libvirt-dbus-1.1.0" -type d ! -perm -200 -exec chmod u+w {} ';' && rm -rf "libvirt-dbus-1.1.0" || { sleep 5 && rm -rf "libvirt-dbus-1.1.0"; }; else :; fi test -d "libvirt-dbus-1.1.0" || mkdir "libvirt-dbus-1.1.0" (cd data && /usr/bin/gmake top_distdir=../libvirt-dbus-1.1.0 distdir=../libvirt-dbus-1.1.0/data \ am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir) gmake[2]: Entering directory `<https://ci.centos.org/job/libvirt-dbus-master-rpm/systems=libvirt-centos-7/ws/build/data'> gmake[2]: Leaving directory `<https://ci.centos.org/job/libvirt-dbus-master-rpm/systems=libvirt-centos-7/ws/build/data'> (cd docs && /usr/bin/gmake top_distdir=../libvirt-dbus-1.1.0 distdir=../libvirt-dbus-1.1.0/docs \ am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir) gmake[2]: Entering directory `<https://ci.centos.org/job/libvirt-dbus-master-rpm/systems=libvirt-centos-7/ws/build/docs'> gmake[2]: Leaving directory `<https://ci.centos.org/job/libvirt-dbus-master-rpm/systems=libvirt-centos-7/ws/build/docs'> (cd src && /usr/bin/gmake top_distdir=../libvirt-dbus-1.1.0 distdir=../libvirt-dbus-1.1.0/src \ am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir) gmake[2]: Entering directory `<https://ci.centos.org/job/libvirt-dbus-master-rpm/systems=libvirt-centos-7/ws/build/src'> gmake[2]: Leaving directory `<https://ci.centos.org/job/libvirt-dbus-master-rpm/systems=libvirt-centos-7/ws/build/src'> (cd tests && /usr/bin/gmake top_distdir=../libvirt-dbus-1.1.0 distdir=../libvirt-dbus-1.1.0/tests \ am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir) gmake[2]: Entering directory `<https://ci.centos.org/job/libvirt-dbus-master-rpm/systems=libvirt-centos-7/ws/build/tests'> gmake[2]: Leaving directory `<https://ci.centos.org/job/libvirt-dbus-master-rpm/systems=libvirt-centos-7/ws/build/tests'> /usr/bin/gmake \ top_distdir="libvirt-dbus-1.1.0" distdir="libvirt-dbus-1.1.0" \ dist-hook gmake[2]: Entering directory `<https://ci.centos.org/job/libvirt-dbus-master-rpm/systems=libvirt-centos-7/ws/build'> GEN gen-AUTHORS gmake[2]: Leaving directory `<https://ci.centos.org/job/libvirt-dbus-master-rpm/systems=libvirt-centos-7/ws/build'> test -n "" \ || find "libvirt-dbus-1.1.0" -type d ! -perm -755 \ -exec chmod u+rwx,go+rx {} \; -o \ ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \ ! -type d ! -perm -400 -exec chmod a+r {} \; -o \ ! -type d ! -perm -444 -exec /bin/sh <https://ci.centos.org/job/libvirt-dbus-master-rpm/systems=libvirt-centos-7/ws/build-aux/install-sh> -c -m a+r {} {} \; \ || chmod -R a+r "libvirt-dbus-1.1.0" tardir=libvirt-dbus-1.1.0 && tar --format=posix -chf - "$tardir" | XZ_OPT=${XZ_OPT--e} xz -c >libvirt-dbus-1.1.0.tar.xz gmake[1]: Leaving directory `<https://ci.centos.org/job/libvirt-dbus-master-rpm/systems=libvirt-centos-7/ws/build'> if test -d "libvirt-dbus-1.1.0"; then find "libvirt-dbus-1.1.0" -type d ! -perm -200 -exec chmod u+w {} ';' && rm -rf "libvirt-dbus-1.1.0" || { sleep 5 && rm -rf "libvirt-dbus-1.1.0"; }; else :; fi ++ pwd + rpmbuild --define '_topdir <https://ci.centos.org/job/libvirt-dbus-master-rpm/systems=libvirt-centos-7/ws/build/rpmbuild'> -ta 'libvirt-dbus-*.tar.gz' error: File libvirt-dbus-*.tar.gz: No such file or directory /usr/bin/cat: libvirt-dbus-*.tar.gz: No such file or directory error: File libvirt-dbus-*.tar.gz: No such file or directory /usr/bin/cat: libvirt-dbus-*.tar.gz: No such file or directory error: Failed to read spec file from libvirt-dbus-*.tar.gz Build step 'Execute shell' marked build as failure
participants (1)
-
ci＠centos.org