See
<
https://ci.centos.org/job/libvirt-master-check/systems=libvirt-centos-6/6...
------------------------------------------
[...truncated 602.16 KB...]
PASS: cputest
TEST: metadatatest
1) Assign metadata ... OK
2) Rewrite Metadata ... OK
3) Erase metadata ... libvirt: Domain
Config error : metadata not found: Requested metadata element is not present
OK
4) text metadata: TITLE 1 ... OK
5) text metadata: TITLE 2 ... libvirt: Domain
Config error : metadata not found: Requested metadata element is not present
libvirt: Domain Config error : metadata not found: Requested metadata element is not
present
OK
6) text metadata: TITLE 3 ... OK
7) text metadata: TITLE 4 ... libvirt: Domain
Config error : metadata title can't contain newlines
libvirt: Domain Config error : metadata title can't contain newlines
OK
8) text metadata: TITLE 5 ... OK
9) text metadata: TITLE 6 ... libvirt: Domain
Config error : metadata title can't contain newlines
libvirt: Domain Config error : metadata title can't contain newlines
OK
10) text metadata: TITLE 7 ... libvirt: Domain
Config error : metadata title can't contain newlines
libvirt: Domain Config error : metadata title can't contain newlines
OK
11) text metadata: DESCRIPTION 1 ... OK
12) text metadata: DESCRIPTION 2 ... libvirt: Domain
Config error : metadata not found: Requested metadata element is not present
libvirt: Domain Config error : metadata not found: Requested metadata element is not
present
OK
13) text metadata: DESCRIPTION 3 ... OK
14) text metadata: DESCRIPTION 4 ... OK
15) text metadata: DESCRIPTION 5 ... OK
PASS: metadatatest
TEST: secretxml2xmltest
1) Secret XML->XML ephemeral-usage-volume ... OK
2) Secret XML->XML usage-volume ... OK
3) Secret XML->XML usage-ceph ... OK
4) Secret XML->XML usage-iscsi ... OK
5) Secret XML->XML usage-tls ... OK
PASS: secretxml2xmltest
TEST: genericxml2xmltest
Generic driver capabilities:
<capabilities>
<host>
<cpu>
<arch>x86_64</arch>
</cpu>
<power_management/>
</host>
<guest>
<os_type>hvm</os_type>
<arch name='i686'>
<wordsize>32</wordsize>
<emulator>/usr/bin/acme-virt</emulator>
<domain type='test'/>
</arch>
</guest>
<guest>
<os_type>hvm</os_type>
<arch name='x86_64'>
<wordsize>64</wordsize>
<emulator>/usr/bin/acme-virt</emulator>
<domain type='test'/>
</arch>
</guest>
</capabilities>
1) GENERIC XML-2-XML disk-virtio ... OK
2) GENERIC XML-2-XML graphics-vnc-minimal ... OK
3) GENERIC XML-2-XML graphics-vnc-manual-port ... OK
4) GENERIC XML-2-XML graphics-vnc-socket ... OK
5) GENERIC XML-2-XML graphics-vnc-socket-listen ... OK
6) GENERIC XML-2-XML graphics-listen-back-compat ... OK
7) GENERIC XML-2-XML graphics-listen-back-compat-mismatch ... Got expected
failure code=1 msg=unsupported configuration: graphics 'listen' attribute
'192.168.123.123' must match 'address' attribute of first listen element
(found '1.2.3.4')libvirt: Domain Config error : unsupported configuration:
graphics 'listen' attribute '192.168.123.123' must match 'address'
attribute of first listen element (found '1.2.3.4')
OK
8) GENERIC XML-2-XML graphics-vnc-listen-attr-only ... OK
9) GENERIC XML-2-XML graphics-vnc-listen-element-minimal ... OK
10) GENERIC XML-2-XML graphics-vnc-listen-element-with-address ... OK
11) GENERIC XML-2-XML graphics-vnc-socket-attr-listen-address ... OK
12) GENERIC XML-2-XML graphics-vnc-socket-attr-listen-socket ... OK
13) GENERIC XML-2-XML graphics-vnc-socket-attr-listen-socket-mismatch ... Got expected
failure code=1 msg=unsupported configuration: graphics 'socket' attribute
'/tmp/vnc.sock' must match 'socket' attribute of first listen element
(found '/tmp/mismatch.sock')libvirt: Domain Config error : unsupported
configuration: graphics 'socket' attribute '/tmp/vnc.sock' must match
'socket' attribute of first listen element (found '/tmp/mismatch.sock')
OK
14) GENERIC XML-2-XML graphics-vnc-autoport-no ... OK
15) GENERIC XML-2-XML name-slash-fail ... Got expected
failure code=1 msg=XML error: name foo/bar cannot contain '/'libvirt: Domain
Config error : XML error: name foo/bar cannot contain '/'
OK
16) GENERIC XML-2-XML perf ... OK
17) GENERIC XML-2-XML vcpus-individual ... OK
18) GENERIC XML-2-XML disk-network-http ... OK
19) GENERIC XML-2-XML cpu-cache-emulate ... OK
20) GENERIC XML-2-XML cpu-cache-passthrough ... OK
21) GENERIC XML-2-XML cpu-cache-disable ... OK
22) GENERIC XML-2-XML chardev-tcp ... OK
23) GENERIC XML-2-XML chardev-tcp-missing-host ... Got expected
failure code=1 msg=internal error: Missing source host attribute for char devicelibvirt:
Domain Config error : internal error: Missing source host attribute for char device
OK
24) GENERIC XML-2-XML chardev-tcp-missing-service ... Got expected
failure code=1 msg=internal error: Missing source service attribute for char
devicelibvirt: Domain Config error : internal error: Missing source service attribute for
char device
OK
25) GENERIC XML-2-XML chardev-tcp-multiple-source ... Got expected
failure code=1 msg=XML error: only one source element is allowed for character
devicelibvirt: Domain Config error : XML error: only one source element is allowed for
character device
OK
26) GENERIC XML-2-XML chardev-udp ... OK
27) GENERIC XML-2-XML chardev-udp-missing-connect-service ... Got expected
failure code=1 msg=internal error: Missing source service attribute for char
devicelibvirt: Domain Config error : internal error: Missing source service attribute for
char device
OK
28) GENERIC XML-2-XML chardev-udp-multiple-source ... Got expected
failure code=1 msg=XML error: only two source elements are allowed for character
devicelibvirt: Domain Config error : XML error: only two source elements are allowed for
character device
OK
29) GENERIC XML-2-XML chardev-unix ... OK
30) GENERIC XML-2-XML chardev-unix-smartcard-missing-path ... Got expected
failure code=1 msg=internal error: Missing source path attribute for char devicelibvirt:
Domain Config error : internal error: Missing source path attribute for char device
OK
31) GENERIC XML-2-XML chardev-unix-redirdev-missing-path ... Got expected
failure code=1 msg=internal error: Missing source path attribute for char devicelibvirt:
Domain Config error : internal error: Missing source path attribute for char device
OK
32) GENERIC XML-2-XML chardev-unix-rng-missing-path ... Got expected
failure code=1 msg=internal error: Missing source path attribute for char devicelibvirt:
Domain Config error : internal error: Missing source path attribute for char device
OK
33) GENERIC XML-2-XML chardev-reconnect ... OK
34) GENERIC XML-2-XML chardev-reconnect-missing-timeout ... Got expected
failure code=1 msg=XML error: missing timeout for chardev with reconnect enabledlibvirt:
Domain Config error : XML error: missing timeout for chardev with reconnect enabled
OK
35) GENERIC XML-2-XML chardev-reconnect-invalid-mode ... Got expected
failure code=1 msg=internal error: chardev reconnect is possible only for connect
modelibvirt: Domain Config error : internal error: chardev reconnect is possible only for
connect mode
OK
PASS: genericxml2xmltest
TEST: virusbtest
1) USBDeviceFind Nexus ... OK
2) USBDeviceFind Nexus wrong devnum ... libvirt: error
: internal error: Did not find USB device 18d1:4e22 bus:1 device:25
OK
3) USBDeviceFind Bogus ... libvirt: error
: internal error: Did not find USB device f00d:beef bus:1024 device:768
OK
4) USBDeviceFind integrated camera ... OK
5) USBDeviceFind wrong bus/devno combination ... libvirt: error
: internal error: Did not find USB device bus:2 device:20
OK
6) USBDeviceFind missing bus ... libvirt: error
: internal error: Did not find USB device bus:5 device:20
OK
7) USBDeviceFind missing devnum ... libvirt: error
: internal error: Did not find USB device bus:1 device:158
OK
8) USBDeviceFind Nexus (multiple results) ... OK
9) USBDeviceFind Bogus vendor and product ... libvirt: error
: internal error: Did not find USB device f00d:beef
OK
10) USBDeviceFind Valid vendor ... libvirt: error
: internal error: Did not find USB device 1d6b:beef
OK
11) USB List test ... OK
PASS: virusbtest
TEST: virnetdevbandwidthtest
1) virNetDevBandwidthSet ... OK
2) virNetDevBandwidthSet ... OK
3) virNetDevBandwidthSet ... OK
4) virNetDevBandwidthSet ... OK
5) virNetDevBandwidthSet ... OK
PASS: virnetdevbandwidthtest
TEST: eventtest
1) Simple write ... OK
2) Deleted before poll ... OK
3) Interrupted during poll ... OK
4) Deleted during dispatch ... OK
5) Deleted during dispatch ... OK
6) Firing a timer ... OK
7) Deleted before poll ... OK
8) Interrupted during poll ... OK
9) Deleted during dispatch ... OK
10) Deleted during dispatch ... OK
11) Simple write ... OK
12) Simple write ... OK
13) Simple write ... OK
14) Simple write ... OK
15) Write duplicate ... OK
PASS: eventtest
TEST: virdrivermoduletest
1) Test driver "network" ... OK
2) Test driver "interface" ... OK
3) Test driver "storage" ... OK
4) Test driver "nodedev" ... OK
5) Test driver "secret" ... OK
6) Test driver "nwfilter" ... OK
7) Test driver "qemu" ... OK
8) Test driver "lxc" ... OK
9) Test driver "uml" ... OK
10) Test driver "vbox" ... OK
PASS: virdrivermoduletest
TEST: objecteventtest
1) Domain createXML start event (old API) ... OK
2) Domain createXML start event (new API) ... OK
3) Domain createXML start event (both API) ... libvirt: Test
Driver error : Domain not found: no domain with matching uuid
'77a6fc12-07b5-9415-8abb-a803613f2a40' (test-domain)
OK
4) Domain (un)define events ... OK
5) Domain start stop events ... OK
6) Network createXML start event ... OK
7) Network (un)define events ... OK
8) Network start stop events ... OK
9) Storage pool createXML start event ... OK
10) Storage pool (un)define events ... OK
11) Storage pool start stop events ... OK
12) Storage pool build event ... OK
13) Storage pool delete event ... OK
14) Node device createXML add event ... OK
PASS: objecteventtest
TEST: virmacmaptest
1) Lookup "none" in "empty"
... OK
2) Remove "none" in "empty"
... OK
3) Lookup "f24" in "simple"
... OK
4) Remove "f24" in "simple"
... OK
5) Lookup "f24" in "simple2"
... OK
6) Remove "f24" in "simple2"
... OK
7) Lookup "f25" in "simple2"
... OK
8) Remove "f25" in "simple2"
... OK
9) Flush "empty" ... OK
10) Flush "simple" ... OK
11) Flush "simple2" ... OK
12) Flush "complex" ... OK
PASS: virmacmaptest
PASS: libvirtd-fail
PASS: libvirtd-pool
PASS: virsh-cpuset
PASS: virsh-define-dev-segfault
PASS: virsh-int-overflow
PASS: virsh-optparse
PASS: virsh-read-bufsiz
PASS: virsh-read-non-seekable
PASS: virsh-schedinfo
1) ../../tests/virsh-self-test ... OK
PASS: virsh-self-test
1) ../../tests/virt-admin-self-test ... OK
PASS: virt-admin-self-test
PASS: virsh-start
PASS: virsh-undefine
Running
'<https://ci.centos.org/job/libvirt-master-check/systems=libvirt-centos-6/ws/build/tools/virsh>
"connect; uri"'
1) User config file ... OK
Running
'<https://ci.centos.org/job/libvirt-master-check/systems=libvirt-centos-6/ws/build/tools/virsh>
"uri"'
2) User config file ... OK
Running
'<https://ci.centos.org/job/libvirt-master-check/systems=libvirt-centos-6/ws/build/tools/virsh>
"connect; uri"'
3) LIBVIRT_DEFAULT_URI ... OK
Running
'<https://ci.centos.org/job/libvirt-master-check/systems=libvirt-centos-6/ws/build/tools/virsh>
"uri"'
4) LIBVIRT_DEFAULT_URI ... OK
Running
'<https://ci.centos.org/job/libvirt-master-check/systems=libvirt-centos-6/ws/build/tools/virsh>
"connect; uri"'
5) VIRSH_DEFAULT_CONNECT_URI ... OK
Running
'<https://ci.centos.org/job/libvirt-master-check/systems=libvirt-centos-6/ws/build/tools/virsh>
"uri"'
6) VIRSH_DEFAULT_CONNECT_URI ... OK
Running
'<https://ci.centos.org/job/libvirt-master-check/systems=libvirt-centos-6/ws/build/tools/virsh>
--connect test:///default?good_uri "connect; uri"'
7) Parameter ... OK
Running
'<https://ci.centos.org/job/libvirt-master-check/systems=libvirt-centos-6/ws/build/tools/virsh>
--connect test:///default?good_uri "uri"'
8) Parameter ... OK
PASS: virsh-uriprecedence
PASS: virsh-vcpupin
=======================================
1 of 120 tests failed
Please report to libvir-list(a)redhat.com
=======================================
make[2]: *** [check-TESTS] Error 1
make[2]: Leaving directory
`<https://ci.centos.org/job/libvirt-master-check/systems=libvirt-centos-6/ws/build/tests'>
make[1]: *** [check-am] Error 2
make[1]: Leaving directory
`<https://ci.centos.org/job/libvirt-master-check/systems=libvirt-centos-6/ws/build/tests'>
make: *** [check-recursive] Error 1
+ cat tests/test-suite.log
cat: tests/test-suite.log: No such file or directory
+ true
+ exit 1
Build step 'Execute shell' marked build as failure