See <https://ci.centos.org/job/libvirt-check/systems=libvirt-debian-9/842/disp... ------------------------------------------ [...truncated 30.10 KB...] make[3]: Leaving directory '<https://ci.centos.org/job/libvirt-check/systems=libvirt-debian-9/ws/build/tests'> Makefile:6001: recipe for target 'check-TESTS' failed make[2]: *** [check-TESTS] Error 2 make[2]: Leaving directory '<https://ci.centos.org/job/libvirt-check/systems=libvirt-debian-9/ws/build/tests'> Makefile:7061: recipe for target 'check-am' failed make[1]: *** [check-am] Error 2 make[1]: Leaving directory '<https://ci.centos.org/job/libvirt-check/systems=libvirt-debian-9/ws/build/tests'> Makefile:1959: recipe for target 'check-recursive' failed make: *** [check-recursive] Error 1 + cat tests/test-suite.log ========================================= libvirt 6.0.0: tests/test-suite.log ========================================= # TOTAL: 139 # PASS: 138 # SKIP: 0 # XFAIL: 0 # FAIL: 1 # XPASS: 0 # ERROR: 0 .. contents:: :depth: 2 FAIL: genericxml2xmltest ======================== TEST: genericxml2xmltest Generic driver capabilities: <capabilities> <host> <cpu> <arch>x86_64</arch> </cpu> <power_management/> <iommu support='no'/> </host> <guest> <os_type>hvm</os_type> <arch name='i686'> <wordsize>32</wordsize> <emulator>/usr/bin/acme-virt</emulator> <domain type='test'/> <domain type='qemu'/> <domain type='kvm'/> </arch> </guest> <guest> <os_type>hvm</os_type> <arch name='x86_64'> <wordsize>64</wordsize> <emulator>/usr/bin/acme-virt</emulator> <domain type='test'/> <domain type='qemu'/> <domain type='kvm'/> </arch> </guest> </capabilities> 1) GENERIC XML-2-XML disk-virtio ... OK 2) GENERIC XML-2-XML graphics-vnc-minimal ... OK 3) GENERIC XML-2-XML graphics-vnc-manual-port ... OK 4) GENERIC XML-2-XML graphics-vnc-socket ... OK 5) GENERIC XML-2-XML graphics-vnc-socket-listen ... OK 6) GENERIC XML-2-XML graphics-listen-back-compat ... OK 7) GENERIC XML-2-XML graphics-listen-back-compat-mismatch ... Got expected failure code=1 msg=unsupported configuration: graphics 'listen' attribute '192.168.123.123' must match 'address' attribute of first listen element (found '1.2.3.4') libvirt: Domain Config error : unsupported configuration: graphics 'listen' attribute '192.168.123.123' must match 'address' attribute of first listen element (found '1.2.3.4') OK 8) GENERIC XML-2-XML graphics-vnc-listen-attr-only ... OK 9) GENERIC XML-2-XML graphics-vnc-listen-element-minimal ... OK 10) GENERIC XML-2-XML graphics-vnc-listen-element-with-address ... OK 11) GENERIC XML-2-XML graphics-vnc-socket-attr-listen-address ... OK 12) GENERIC XML-2-XML graphics-vnc-socket-attr-listen-socket ... OK 13) GENERIC XML-2-XML graphics-vnc-socket-attr-listen-socket-mismatch ... Got expected failure code=1 msg=unsupported configuration: graphics 'socket' attribute '/tmp/vnc.sock' must match 'socket' attribute of first listen element (found '/tmp/mismatch.sock') libvirt: Domain Config error : unsupported configuration: graphics 'socket' attribute '/tmp/vnc.sock' must match 'socket' attribute of first listen element (found '/tmp/mismatch.sock') OK 14) GENERIC XML-2-XML graphics-vnc-autoport-no ... OK 15) GENERIC XML-2-XML name-slash-fail ... Got expected failure code=1 msg=XML error: name foo/bar cannot contain '/' libvirt: Domain Config error : XML error: name foo/bar cannot contain '/' OK 16) GENERIC XML-2-XML perf ... OK 17) GENERIC XML-2-XML vcpus-individual ... OK 18) GENERIC XML-2-XML disk-network-http ... OK 19) GENERIC XML-2-XML cpu-cache-emulate ... OK 20) GENERIC XML-2-XML cpu-cache-passthrough ... OK 21) GENERIC XML-2-XML cpu-cache-disable ... OK 22) GENERIC XML-2-XML chardev-tcp ... OK 23) GENERIC XML-2-XML chardev-tcp-missing-host ... Got expected failure code=1 msg=internal error: Missing source host attribute for char device libvirt: Domain Config error : internal error: Missing source host attribute for char device OK 24) GENERIC XML-2-XML chardev-tcp-missing-service ... Got expected failure code=1 msg=internal error: Missing source service attribute for char device libvirt: Domain Config error : internal error: Missing source service attribute for char device OK 25) GENERIC XML-2-XML chardev-tcp-multiple-source ... Got expected failure code=1 msg=XML error: only one source element is allowed for character device libvirt: Domain Config error : XML error: only one source element is allowed for character device OK 26) GENERIC XML-2-XML chardev-udp ... OK 27) GENERIC XML-2-XML chardev-udp-missing-connect-service ... Got expected failure code=1 msg=internal error: Missing source service attribute for char device libvirt: Domain Config error : internal error: Missing source service attribute for char device OK 28) GENERIC XML-2-XML chardev-udp-multiple-source ... Got expected failure code=1 msg=XML error: only two source elements are allowed for character device libvirt: Domain Config error : XML error: only two source elements are allowed for character device OK 29) GENERIC XML-2-XML chardev-unix ... OK 30) GENERIC XML-2-XML chardev-unix-smartcard-missing-path ... Got expected failure code=1 msg=internal error: Missing source path attribute for char device libvirt: Domain Config error : internal error: Missing source path attribute for char device OK 31) GENERIC XML-2-XML chardev-unix-redirdev-missing-path ... Got expected failure code=1 msg=internal error: Missing source path attribute for char device libvirt: Domain Config error : internal error: Missing source path attribute for char device OK 32) GENERIC XML-2-XML chardev-unix-rng-missing-path ... Got expected failure code=1 msg=internal error: Missing source path attribute for char device libvirt: Domain Config error : internal error: Missing source path attribute for char device OK 33) GENERIC XML-2-XML chardev-reconnect ... OK 34) GENERIC XML-2-XML chardev-reconnect-missing-timeout ... Got expected failure code=1 msg=XML error: missing timeout for chardev with reconnect enabled libvirt: Domain Config error : XML error: missing timeout for chardev with reconnect enabled OK 35) GENERIC XML-2-XML chardev-reconnect-invalid-mode ... Got expected failure code=1 msg=internal error: chardev reconnect is possible only for connect mode libvirt: Domain Config error : internal error: chardev reconnect is possible only for connect mode OK 36) GENERIC XML-2-XML cachetune-small ... OK 37) GENERIC XML-2-XML cachetune-cdp ... OK 38) GENERIC XML-2-XML cachetune ... OK 39) GENERIC XML-2-XML cachetune-extra-tunes ... OK 40) GENERIC XML-2-XML cachetune-colliding-allocs ... Got expected failure code=1 msg=XML error: Colliding cache allocations for cache level '3' id '0', type 'code' libvirt: Resource control error : XML error: Colliding cache allocations for cache level '3' id '0', type 'code' OK 41) GENERIC XML-2-XML cachetune-colliding-tunes ... Got expected failure code=1 msg=XML error: Identical vcpus in cachetunes found libvirt: Domain Config error : XML error: Identical vcpus in cachetunes found OK 42) GENERIC XML-2-XML cachetune-colliding-types ... Got expected failure code=1 msg=XML error: Colliding cache allocations for cache level '3' id '0', type 'code' libvirt: Resource control error : XML error: Colliding cache allocations for cache level '3' id '0', type 'code' OK 43) GENERIC XML-2-XML cachetune-colliding-monitor ... Got expected failure code=1 msg=invalid argument: Monitor vcpus conflicts with allocation libvirt: Domain Config error : invalid argument: Monitor vcpus conflicts with allocation OK 44) GENERIC XML-2-XML memorytune ... In '<https://ci.centos.org/job/libvirt-check/systems=libvirt-debian-9/ws/build/../tests/genericxml2xmloutdata/memorytune.xml'>: Offset 0 Expect [<domain type='qemu'> <name>QEMUGuest1</name> <uuid>c7a5fdbd-edaf-9455-926a-d65c16db1809</uuid> <memory unit='KiB'>219136</memory> <currentMemory unit='KiB'>219136</currentMemory> <vcpu placement='static'>4</vcpu> <cputune> <cachetune vcpus='0-1'> <cache id='0' level='3' type='both' size='768' unit='KiB'/> <cache id='1' level='3' type='both' size='768' unit='KiB'/> </cachetune> <memorytune vcpus='0-1'> <node id='0' bandwidth='20'/> <node id='1' bandwidth='30'/> <monitor vcpus='0-1'/> <monitor vcpus='0'/> </memorytune> <memorytune vcpus='3'> <node id='0' bandwidth='50'/> </memorytune> <memorytune vcpus='2'> <monitor vcpus='2'/> </memorytune> </cputune> <os> <type arch='i686' machine='pc'>hvm</type> <boot dev='hd'/> </os> <clock offset='utc'/> <on_poweroff>destroy</on_poweroff> <on_reboot>restart</on_reboot> <on_crash>destroy</on_crash> <devices> <emulator>/usr/bin/qemu-system-i686</emulator> <controller type='usb' index='0'/> <controller type='ide' index='0'/> <controller type='pci' index='0' model='pci-root'/> <input type='mouse' bus='ps2'/> <input type='keyboard' bus='ps2'/> <memballoon model='virtio'/> </devices> </domain> ] Actual [<domain type='qemu'> <name>QEMUGuest1</name> <uuid>c7a5fdbd-edaf-9455-926a-d65c16db1809</uuid> <memory unit='KiB'>219136</memory> <currentMemory unit='KiB'>219136</currentMemory> <vcpu placement='static'>4</vcpu> <cputune> <cachetune vcpus='0-1'> <cache id='0' level='3' type='both' size='768' unit='KiB'/> <cache id='1' level='3' type='both' size='768' unit='KiB'/> </cachetune> <memorytune vcpus='0-1'> <node id='0' bandwidth='20'/> <node id='1' bandwidth='30'/> <monitor vcpus='0-1'/> <monitor vcpus='0'/> </memorytune> <memorytune vcpus='3'> <node id='0' bandwidth='50'/> </memorytune> <memorytune vcpus='2'> <monitor vcpus='2'/> </memorytune> </cputune> <os> <type arch='i686' machine='pc'>hvm</type> <boot dev='hd'/> </os> <clock offset='utc'/> <on_poweroff>destroy</on_poweroff> <on_reboot>restart</on_reboot> <on_crash>destroy</on_crash> <devices> <emulator>/usr/bin/qemu-system-i386</emulator> <controller type='usb' index='0'/> <controller type='ide' index='0'/> <controller type='pci' index='0' model='pci-root'/> <input type='mouse' bus='ps2'/> <input type='keyboard' bus='ps2'/> <memballoon model='virtio'/> </devices> </domain> ] ... Expected result code=0 but received code=4 FAILED 45) GENERIC XML-2-XML memorytune-colliding-allocs ... Got expected failure code=1 msg=XML error: Memory Bandwidth already defined for node 0 libvirt: Resource control error : XML error: Memory Bandwidth already defined for node 0 OK 46) GENERIC XML-2-XML memorytune-colliding-cachetune ... Got expected failure code=1 msg=XML error: Overlapping vcpus in resctrls libvirt: Domain Config error : XML error: Overlapping vcpus in resctrls OK 47) GENERIC XML-2-XML tseg ... OK 48) GENERIC XML-2-XML launch-security-sev ... OK 49) GENERIC XML-2-XML cputune ... OK 50) QEMU BACKUP XML-2-XML empty ... OK 51) QEMU BACKUP XML-2-XML backup-pull ... OK 52) QEMU BACKUP XML-2-XML backup-pull-seclabel ... OK 53) QEMU BACKUP XML-2-XML backup-push ... OK 54) QEMU BACKUP XML-2-XML backup-push-seclabel ... OK FAIL genericxml2xmltest (exit status: 1) + exit 1 Build step 'Execute shell' marked build as failure